Research Cluster
GPC, Standards, and Molecular Weight
This cluster contains 290 public open-access papers related to gpc, sec, molecular weight, standards, calibration, dispersity, chromatography. Use it as a starting bibliography for method checks, literature review, and citation-backed page expansion.
- Yuhang Liu, Jingbo Zhao, Zhengke Li, Cheng Mu, et al. (2014). Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells. Nature Communications. DOI: 10.1038/ncomms6293.
- Mathias Ulbricht (2006). Advanced functional polymer membranes. Polymer. DOI: 10.1016/j.polymer.2006.01.084.
- Huaxing Zhou, Liqiang Yang, Wei You (2012). Rational Design of High Performance Conjugated Polymers for Organic Solar Cells. Macromolecules. DOI: 10.1021/ma201648t.
- Mattias Svensson, Fengling Zhang, Sjoerd Veenstra, Wiljan Verhees, et al. (2003). High‐Performance Polymer Solar Cells of an Alternating Polyfluorene Copolymer and a Fullerene Derivative. Advanced Materials. DOI: 10.1002/adma.200304150.
- Sunsun Li, Long Ye, Wenchao Zhao, Hongping Yan, et al. (2018). A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells. Journal of the American Chemical Society. DOI: 10.1021/jacs.8b02695.
- Weiwei Li, Alice Furlan, Koen H. Hendriks, Martijn M. Wienk, et al. (2013). Efficient Tandem and Triple-Junction Polymer Solar Cells. Journal of the American Chemical Society. DOI: 10.1021/ja401434x.
- Koji Fukao, Yoshihisa Miyamoto (2000). Glass transitions and dynamics in thin polymer films: Dielectric relaxation of thin films of polystyrene. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics. DOI: 10.1103/physreve.61.1743.
- Galina Satchanska, Slavena Davidova, Petar Petrov (2024). Natural and Synthetic Polymers for Biomedical and Environmental Applications. Polymers. DOI: 10.3390/polym16081159.
- Joon Seok Lee, Kyu Ha Choi, Han Do Ghim, Sam Soo Kim, et al. (2004). Role of molecular weight of atactic poly(vinyl alcohol) (PVA) in the structure and properties of PVA nanofabric prepared by electrospinning. Journal of Applied Polymer Science. DOI: 10.1002/app.20602.
- Zhiya Ma, Yueping Guan, Huizhou Liu (2005). Synthesis and characterization of micron‐sized monodisperse superparamagnetic polymer particles with amino groups. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.20803.
- D. M. Koenhen, C.A. Smolders (1975). The determination of solubility parameters of solvents and polymers by means of correlations with other physical quantities. Journal of Applied Polymer Science. DOI: 10.1002/app.1975.070190423.
- Weiwei Li, Koen H. Hendriks, Alice Furlan, W. S. Christian Roelofs, et al. (2013). Universal Correlation between Fibril Width and Quantum Efficiency in Diketopyrrolopyrrole-Based Polymer Solar Cells. Journal of the American Chemical Society. DOI: 10.1021/ja4101003.
- Sandy P. S. Koo, Milan M. Stamenović, R. Arun Prasath, Andrew Inglis, et al. (2010). Limitations of radical thiol‐ene reactions for polymer–polymer conjugation. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.23933.
- Xiaodan Gu, Yan Zhou, Kevin L. Gu, Tadanori Kurosawa, et al. (2017). Roll‐to‐Roll Printed Large‐Area All‐Polymer Solar Cells with 5% Efficiency Based on a Low Crystallinity Conjugated Polymer Blend. Advanced Energy Materials. DOI: 10.1002/aenm.201602742.
- Lun Si, Michael V. Massa, Kari Dalnoki‐Veress, Hugh R. Brown, et al. (2005). Chain Entanglement in Thin Freestanding Polymer Films. Physical Review Letters. DOI: 10.1103/physrevlett.94.127801.
- Joseph A. Akkara, Kris Senecal, David L. Kaplan (1991). Synthesis and characterization of polymers produced by horseradish peroxidase in dioxane. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.1991.080291105.
- Weiwei Li, Koen H. Hendriks, Alice Furlan, W. S. Christian Roelofs, et al. (2013). Effect of the Fibrillar Microstructure on the Efficiency of High Molecular Weight Diketopyrrolopyrrole‐Based Polymer Solar Cells. Advanced Materials. DOI: 10.1002/adma.201304360.
- Reza Arjmandi, Azman Hassan, Khaliq Majeed, Zainoha Zakaria (2015). Rice Husk Filled Polymer Composites. International Journal of Polymer Science. DOI: 10.1155/2015/501471.
- R. Fayt, R. Jérôme, Ph. Teyssié (1989). Molecular design of multicomponent polymer systems. XIV. Control of the mechanical properties of polyethylene–polystyrene blends by block copolymers. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.1989.090270405.
- Ksenia Timachova, Hiroshi Watanabe, Nitash P. Balsara (2015). Effect of Molecular Weight and Salt Concentration on Ion Transport and the Transference Number in Polymer Electrolytes. Macromolecules. DOI: 10.1021/acs.macromol.5b01724.
- Christopher M. Bates, Alice B. Chang, Nebojša Momčilović, Simon C. Jones, et al. (2015). ABA Triblock Brush Polymers: Synthesis, Self-Assembly, Conductivity, and Rheological Properties. Macromolecules. DOI: 10.1021/acs.macromol.5b00880.
- Victoria J. Cunningham, Abdullah M. Alswieleh, Kate L. Thompson, Mark Williams, et al. (2014). Poly(glycerol monomethacrylate)–Poly(benzyl methacrylate) Diblock Copolymer Nanoparticles via RAFT Emulsion Polymerization: Synthesis, Characterization, and Interfacial Activity. Macromolecules. DOI: 10.1021/ma501140h.
- Milene M. E. Costa, Elaine Christine de Magalhães Cabral Albuquerque, Tito Lívio Moitinho Alves, José Carlos Pinto, et al. (2013). Use of Polyhydroxybutyrate and Ethyl Cellulose for Coating of Urea Granules. Journal of Agricultural and Food Chemistry. DOI: 10.1021/jf401185y.
- Rosangela Mastrangelo, David Chelazzi, Giovanna Poggi, Emiliano Fratini, et al. (2020). Twin-chain polymer hydrogels based on poly(vinyl alcohol) as new advanced tool for the cleaning of modern and contemporary art. Proceedings of the National Academy of Sciences. DOI: 10.1073/pnas.1911811117.
- Jing Zeng, Xuesi Chen, Xiaoyi Xu, Qizhi Liang, et al. (2003). Ultrafine fibers electrospun from biodegradable polymers. Journal of Applied Polymer Science. DOI: 10.1002/app.12260.
- Tatsiana P. Rusina, Foppe Smedes, Jana Klánová (2010). Diffusion coefficients of polychlorinated biphenyls and polycyclic aromatic hydrocarbons in polydimethylsiloxane and low‐density polyethylene polymers. Journal of Applied Polymer Science. DOI: 10.1002/app.31704.
- Koji Fukao, Shinobu Uno, Yoshihisa Miyamoto, Akitaka Hoshino, et al. (2001). Dynamics of<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>α</mml:mi></mml:math>and<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>β</mml:mi></mml:math>processes in thin polymer films: Poly(vinyl acetate) and poly(methyl methacrylate). Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics. DOI: 10.1103/physreve.64.051807.
- Dylan J. Walsh, Devin A. Schinski, Robert A. Schneider, Damien Guironnet (2020). General route to design polymer molecular weight distributions through flow chemistry. Nature Communications. DOI: 10.1038/s41467-020-16874-6.
- Yingdong Luo, Damien Montarnal, Sangwon Kim, Weichao Shi, et al. (2015). Poly(dimethylsiloxane-<i>b</i>-methyl methacrylate): A Promising Candidate for Sub-10 nm Patterning. Macromolecules. DOI: 10.1021/acs.macromol.5b00518.
- Fengkui Li, Richard C. Larock (2000). Thermosetting polymers from cationic copolymerization of tung oil: Synthesis and characterization. Journal of Applied Polymer Science. DOI: 10.1002/1097-4628(20001031)78:5<1044::aid-app130>3.0.co;2-a.
- Jomon Joy, Elssa George, Prakashan Haritha, Sabu Thomas, et al. (2020). An overview of boron nitride based polymer nanocomposites. Journal of Polymer Science. DOI: 10.1002/pol.20200507.
- Naiying Du, Gilles P. Robertson, Ingo Pinnau, Michael D. Guiver (2010). Polymers of Intrinsic Microporosity with Dinaphthyl and Thianthrene Segments. Macromolecules. DOI: 10.1021/ma101930x.
- Małgorzata Wiśniewska, Teresa Urban, Elżbieta Grządka, V.I. Zarko, et al. (2013). Comparison of adsorption affinity of polyacrylic acid for surfaces of mixed silica–alumina. Colloid & Polymer Science. DOI: 10.1007/s00396-013-3103-x.
- Sérgio Neves Monteiro, Foluke Salgado de Assis, Carlos A. Ferreira, Noan Tonini Simonassi, et al. (2018). Fique Fabric: A Promising Reinforcement for Polymer Composites. Polymers. DOI: 10.3390/polym10030246.
- Xin Du, Junhui He (2008). Facile size‐controllable syntheses of highly monodisperse polystyrene nano‐ and microspheres by polyvinylpyrrolidone‐mediated emulsifier‐free emulsion polymerization. Journal of Applied Polymer Science. DOI: 10.1002/app.27774.
- Yichun Yuan, Konpal Raheja, Nathalie B. Milbrandt, Sophia Beilharz, et al. (2023). Thermoresponsive polymers with LCST transition: synthesis, characterization, and their impact on biomedical frontiers. RSC Applied Polymers. DOI: 10.1039/d3lp00114h.
- Sarah J. Hardman, Norazilawati Muhamad-Sarih, Helen J. Riggs, Richard L. Thompson, et al. (2011). Electrospinning Superhydrophobic Fibers Using Surface Segregating End-Functionalized Polymer Additives. Macromolecules. DOI: 10.1021/ma200852z.
- Nicole Pircher, Stefan Veigel, Nikita Aigner, Jean‐Marie Nédélec, et al. (2014). Reinforcement of bacterial cellulose aerogels with biocompatible polymers. Carbohydrate Polymers. DOI: 10.1016/j.carbpol.2014.04.029.
- Michael M. Lübtow, Malik Salman Haider, Marius Kirsch, Stefanie Klisch, et al. (2019). Like Dissolves Like? A Comprehensive Evaluation of Partial Solubility Parameters to Predict Polymer–Drug Compatibility in Ultrahigh Drug-Loaded Polymer Micelles. Biomacromolecules. DOI: 10.1021/acs.biomac.9b00618.
- Betty Wong, Zhiyi Zhang, Y. P. Handa (1998). High-precision gravimetric technique for determining the solubility and diffusivity of gases in polymers. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/(sici)1099-0488(19980915)36:12<2025::aid-polb2>3.0.co;2-w.
- Jie Zhang, Tianwen Bai, Weixi Liu, Mingzhao Li, et al. (2023). All-organic polymeric materials with high refractive index and excellent transparency. Nature Communications. DOI: 10.1038/s41467-023-39125-w.
- Gustavo F. de Paula, Germano I. Netto, L. H. C. Mattoso (2011). Physical and Chemical Characterization of Poly(hexamethylene biguanide) Hydrochloride. Polymers. DOI: 10.3390/polym3020928.
- Elena Llorens, Elaine Armelín, Maria M. Pérez‐Madrigal, Luís J. del Valle, et al. (2013). Nanomembranes and Nanofibers from Biodegradable Conducting Polymers. Polymers. DOI: 10.3390/polym5031115.
- Tety Sudiarti, Deana Wahyuningrum, Bunbun Bundjali, I Made Arcana (2017). Mechanical strength and ionic conductivity of polymer electrolyte membranes prepared from cellulose acetate-lithium perchlorate. IOP Conference Series Materials Science and Engineering. DOI: 10.1088/1757-899x/223/1/012052.
- Kevin Kauffman, Clement Do, Sadhana Sharma, Matthew D. Gallovic, et al. (2012). Synthesis and Characterization of Acetalated Dextran Polymer and Microparticles with Ethanol as a Degradation Product. ACS Applied Materials & Interfaces. DOI: 10.1021/am3008888.
- Ioannis S. Polios, Maria Soliman, Chin Lee, Samuel P. Gido, et al. (1997). Late Stages of Phase Separation in a Binary Polymer Blend Studied by Rheology, Optical and Electron Microscopy, and Solid State NMR. Macromolecules. DOI: 10.1021/ma9701292.
- Mahmoud Abdel‐Goad, Wim Pyckhout‐Hintzen, S. Kahle, Jürgen Allgaier, et al. (2004). Rheological Properties of 1,4-Polyisoprene over a Large Molecular Weight Range. Macromolecules. DOI: 10.1021/ma030557+.
- Sébastien Perny, Jürgen Allgaier, Dong-Hyun Cho, Wonmok Lee, et al. (2001). Synthesis and Structural Analysis of an H-Shaped Polybutadiene. Macromolecules. DOI: 10.1021/ma001608v.
- Daniele Parisi, Salvatore Costanzo, Youncheol Jeong, Junyoung Ahn, et al. (2021). Nonlinear Shear Rheology of Entangled Polymer Rings. Macromolecules. DOI: 10.1021/acs.macromol.0c02839.
- Shuichi Tanoue, Leszek A. Utracki, A. García‐Rejón, J. Tatibouët, et al. (2004). Melt compounding of different grades of polystyrene with organoclay. Part 1: Compounding and characterization. Polymer Engineering and Science. DOI: 10.1002/pen.20098.
- Sarah E. Grieshaber, Alexandra J. E. Farran, Sheng Lin‐Gibson, Kristi L. Kiick, et al. (2009). Synthesis and Characterization of Elastin−Mimetic Hybrid Polymers with Multiblock, Alternating Molecular Architecture and Elastomeric Properties. Macromolecules. DOI: 10.1021/ma802791z.
- Jan Dijk, J. Smit, F. E. Kohn, Jan Feijén (1983). Characterization of poly(<scp>D</scp>,<scp>L</scp>‐lactic acid) by gel permeation chromatography. Journal of Polymer Science Polymer Chemistry Edition. DOI: 10.1002/pol.1983.170210121.
- Vincenzo Taresco, Rhiannon Creasey, Jeremy Thomas Kennon, Giuseppe Mantovani, et al. (2016). Variation in structure and properties of poly(glycerol adipate) via control of chain branching during enzymatic synthesis. Polymer. DOI: 10.1016/j.polymer.2016.02.036.
- Weichao Shi, Nathaniel A. Lynd, Damien Montarnal, Yingdong Luo, et al. (2014). Toward Strong Thermoplastic Elastomers with Asymmetric Miktoarm Block Copolymer Architectures. Macromolecules. DOI: 10.1021/ma402566g.
- Guillaume G. Hedir, Craig A. Bell, Rachel K. O’Reilly, Andrew P. Dove (2015). Functional Degradable Polymers by Radical Ring-Opening Copolymerization of MDO and Vinyl Bromobutanoate: Synthesis, Degradability and Post-Polymerization Modification. Biomacromolecules. DOI: 10.1021/acs.biomac.5b00476.
- Zhenyu Di, Dorthe Posselt, Detlef‐M. Smilgies, Christine M. Papadakis (2009). Structural Rearrangements in a Lamellar Diblock Copolymer Thin Film during Treatment with Saturated Solvent Vapor. Macromolecules. DOI: 10.1021/ma9017795.
- Sofia Nunes, Francesca Ramacciotti, Artur Neves, Eva Mariasole Angelin, et al. (2020). A diagnostic tool for assessing the conservation condition of cellulose nitrate and acetate in heritage collections: quantifying the degree of substitution by infrared spectroscopy. Heritage Science. DOI: 10.1186/s40494-020-00373-4.
- Sabyasachi Maiti, Santanu Kaity, Somasree Ray, Biswanath Sa (2011). Development and evaluation of xanthan gum-facilitated ethyl cellulose microsponges for controlled percutaneous delivery of diclofenac sodium. Acta Pharmaceutica. DOI: 10.2478/v10007-011-0022-6.
- Barshan Dev, Md Ashikur Rahman, Md. Reazuddin Repon, Mohammed M. Rahman, et al. (2023). Recent progress in thermal and acoustic properties of natural fiber reinforced polymer composites: Preparation, characterization, and data analysis. Polymer Composites. DOI: 10.1002/pc.27633.
- Kevin Chenmin Tseng, N. J. TURRO, C. J. Durning (2000). Molecular mobility in polymer thin films. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics. DOI: 10.1103/physreve.61.1800.
- Patrick J. M. Stals, Martijn A. J. Gillissen, Renaud Nicolaÿ, Anja R. A. Palmans, et al. (2013). The balance between intramolecular hydrogen bonding, polymer solubility and rigidity in single-chain polymeric nanoparticles. Polymer Chemistry. DOI: 10.1039/c3py00094j.
- Catharina Kahrs, Thorben Gühlstorf, Jan Schwellenbach (2019). Influences of different preparation variables on polymeric membrane formation via nonsolvent induced phase separation. Journal of Applied Polymer Science. DOI: 10.1002/app.48852.
- Sunanda Sain, Dipa Ray, Anirudhha Mukhopadhyay, Suparna Sengupta, et al. (2012). Synthesis and characterization of PMMA‐cellulose nanocomposites by <i>in situ</i> polymerization technique. Journal of Applied Polymer Science. DOI: 10.1002/app.36723.
- Siti Nurul ‘Afini Mohd Johari, Nazrizawati Ahmad Tajuddin, Hussein Hanibah, Siti Khatijah Deraman (2021). A Review: Ionic Conductivity of Solid Polymer Electrolyte Based Polyethylene Oxide. International Journal of Electrochemical Science. DOI: 10.20964/2021.10.53.
- Li Ding, Richard I. Blackwell, Jay F. Künzler, Wayne H. Knox (2006). Large refractive index change in silicone-based and non-silicone-based hydrogel polymers induced by femtosecond laser micro-machining. Optics Express. DOI: 10.1364/oe.14.011901.
- Mirna A. Mosiewicki, Mirta I. Aranguren, J. Borrajo (2005). Mechanical properties of linseed oil monoglyceride maleate/styrene copolymers. Journal of Applied Polymer Science. DOI: 10.1002/app.21790.
- Ken Ichikawa, Takayuki Mori, Hiromi Kitano, Mitsuhiro Fukuda, et al. (2001). Fourier transform infrared study on the sorption of water to various kinds of polymer thin films. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.1191.
- Leire Sangroniz, Mercedes Fernández, Antxón Santamaría (2023). Polymers and rheology: A tale of give and take. Polymer. DOI: 10.1016/j.polymer.2023.125811.
- Ran Dong, Wenjian Gong, Qiuyun Guo, Hui Liu, et al. (2024). Synergistic Effects of Radical Distributions of Soluble and Insoluble Polymers within Electrospun Nanofibers for an Extending Release of Ferulic Acid. Polymers. DOI: 10.3390/polym16182614.
- Xiangning Meng, Yingchun Li, Najla AlMasoud, Wensheng Wang, et al. (2023). Compatibilizing and toughening blends of recycled acrylonitrile-butadiene-styrene/recycled high impact polystyrene blends via styrene-butadiene-glycidyl methacrylate terpolymer. Polymer. DOI: 10.1016/j.polymer.2023.125856.
- Kothandapani Babu, R. Dhamodharan (2008). Grafting of Poly(methyl methacrylate) Brushes from Magnetite Nanoparticles Using a Phosphonic Acid Based Initiator by Ambient Temperature Atom Transfer Radical Polymerization (ATATRP). Nanoscale Research Letters. DOI: 10.1007/s11671-008-9121-9.
- Deck Khong Tan, Mohammed Maniruzzaman, Ali Nokhodchi (2019). Development and Optimisation of Novel Polymeric Compositions for Sustained Release Theophylline Caplets (PrintCap) via FDM 3D Printing. Polymers. DOI: 10.3390/polym12010027.
- Alejandra P. Lopez-Oliva, Nicholas J. Warren, Arthi D. Rajkumar, Oleksandr O. Mykhaylyk, et al. (2015). Polydimethylsiloxane-Based Diblock Copolymer Nano-objects Prepared in Nonpolar Media via RAFT-Mediated Polymerization-Induced Self-Assembly. Macromolecules. DOI: 10.1021/acs.macromol.5b00576.
- Markus Scholl, Tuan Q. Nguyen, Bernd Bruchmann, Harm‐Anton Klok (2007). The thermal polymerization of amino acids revisited; Synthesis and structural characterization of hyperbranched polymers from <scp>L</scp>‐lysine. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.22295.
- Luis Marcelo Lozano, Isabel Bagudanch, Alan O. Sustaita, Jackeline Iturbe-Ek, et al. (2018). Single-Point Incremental Forming of Two Biocompatible Polymers: An Insight into Their Thermal and Structural Properties. Polymers. DOI: 10.3390/polym10040391.
- Thibault Parpaite, Belkacem Otazaghine, A. S. Caro‐Bretelle, Aurélie Taguet, et al. (2016). Janus hybrid silica/polymer nanoparticles as effective compatibilizing agents for polystyrene/polyamide-6 melted blends. Polymer. DOI: 10.1016/j.polymer.2016.02.044.
- Yan Zhang, Xiaoling Chen, Zhengping Fang (2012). Synergistic effects of expandable graphite and ammonium polyphosphate with a new carbon source derived from biomass in flame retardant ABS. Journal of Applied Polymer Science. DOI: 10.1002/app.38382.
- K. L. Ngai, D. J. Plazek, A. K. Rizos (1997). Viscoelastic properties of amorphous polymers. 5. A coupling model analysis of the thermorheological complexity of polyisobutylene in the glass-rubber softening dispersion. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/(sici)1099-0488(199703)35:4<599::aid-polb8>3.0.co;2-l.
- Leandro G. Nandi, Celso R. Nicoleti, Ismael C. Bellettini, Vanderlei G. Machado (2014). Optical Chemosensor for the Detection of Cyanide in Water Based On Ethyl(hydroxyethyl)cellulose Functionalized with Brooker’s Merocyanine. Analytical Chemistry. DOI: 10.1021/ac501233x.
- Emer Browne, Zelalem Ayenew Worku, Anne Marie Healy (2020). Physicochemical Properties of Poly-vinyl Polymers and Their Influence on Ketoprofen Amorphous Solid Dispersion Performance: A Polymer Selection Case Study. Pharmaceutics. DOI: 10.3390/pharmaceutics12050433.
- Roberto Pantani, Lih‐Sheng Turng (2015). Manufacturing of advanced biodegradable polymeric components. Journal of Applied Polymer Science. DOI: 10.1002/app.42889.
- Sunting Xuan, Sudipta Gupta, Xin Li, Markus Bleuel, et al. (2017). Synthesis and Characterization of Well-Defined PEGylated Polypeptoids as Protein-Resistant Polymers. Biomacromolecules. DOI: 10.1021/acs.biomac.6b01824.
- Pairote Klinpituksa, Patchareeya Kosaiyakanon (2017). Superabsorbent Polymer Based on Sodium Carboxymethyl Cellulose Grafted Polyacrylic Acid by Inverse Suspension Polymerization. International Journal of Polymer Science. DOI: 10.1155/2017/3476921.
- Atul Kumar Maurya, Felipe M. de Souza, Tim Dawsey, Ram K. Gupta (2023). Biodegradable polymers and composites: Recent development and challenges. Polymer Composites. DOI: 10.1002/pc.28023.
- Kuiri F. Tjipangandjara, P. Somasundaran (1991). Effects of changes in adsorbed polyacrylic acid conformation on alumina flocculation. Colloids and Surfaces. DOI: 10.1016/0166-6622(91)80096-7.
- Erik De Clercq, P. De Somer (1968). Effect of Interferon, Polyacrylic Acid, and Polymethacrylic Acid on Tail Lesions in Mice Infected with Vaccinia Virus. Applied Microbiology. DOI: 10.1128/am.16.9.1314-1319.1968.
- Sung Chul Hong, Tadeusz Pakuła, Krzysztof Matyjaszewski (2001). Preparation of Polyisobutene-graft-Poly(methyl methacrylate) and Polyisobutene-graft-Polystyrene with Different Compositions and Side Chain Architectures through Atom Transfer Radical Polymerization (ATRP). Macromolecular Chemistry and Physics. DOI: 10.1002/1521-3935(20011101)202:17<3392::aid-macp3392>3.0.co;2-4.
- Colin A. Scholes, Jianyong Jin, Geoffrey W. Stevens, Sandra E. Kentish (2015). Competitive permeation of gas and water vapour in high free volume polymeric membranes. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.23689.
- Joana Filipa Parente, Vânia Isabel Sousa, Juliana Marques, Marta Adriana Forte, et al. (2022). Biodegradable Polymers for Microencapsulation Systems. Advances in Polymer Technology. DOI: 10.1155/2022/4640379.
- Kevin M. Burridge, Benjamin D. Harding, Indra D. Sahu, Madison M. Kearns, et al. (2020). Simple Derivatization of RAFT-Synthesized Styrene–Maleic Anhydride Copolymers for Lipid Disk Formulations. Biomacromolecules. DOI: 10.1021/acs.biomac.0c00041.
- Ping Wang, Yin‐Ning Zhou, Jiangshui Luo, Zheng‐Hong Luo (2013). Poly(ionic liquid)s-based nanocomposite polyelectrolytes with tunable ionic conductivity prepared via SI-ATRP. Polymer Chemistry. DOI: 10.1039/c3py01025b.
- Moonis Ali Khan, Ramendhirran Govindasamy, Akil Ahmad, Masoom Raza Siddiqui, et al. (2021). Carbon Based Polymeric Nanocomposites for Dye Adsorption: Synthesis, Characterization, and Application. Polymers. DOI: 10.3390/polym13030419.
- Yiping Xu, Zijian Wang, Runhui Ke, Shahamat U. Khan (2005). Accumulation of Organochlorine Pesticides from Water Using Triolein Embedded Cellulose Acetate Membranes. Environmental Science & Technology. DOI: 10.1021/es040454m.
- Ruma Maji, Somasree Ray, B. Krishna Das, Amit Kumar Nayak (2012). Ethyl Cellulose Microparticles Containing Metformin HCl by Emulsification-Solvent Evaporation Technique: Effect of Formulation Variables. ISRN Polymer Science. DOI: 10.5402/2012/801827.
- Suneel, D. Martin A. Buzza, David Groves, Tom McLeish, et al. (2002). Rheology and Molecular Weight Distribution of Hyperbranched Polymers. Macromolecules. DOI: 10.1021/ma020820r.
- A. De Fenzo, M. Giordano, Lucia Sansone (2020). A Clean Process for Obtaining High-Quality Cellulose Acetate from Cigarette Butts. Materials. DOI: 10.3390/ma13214710.
- Youngsuk Heo, Ronald G. Larson (2008). Universal Scaling of Linear and Nonlinear Rheological Properties of Semidilute and Concentrated Polymer Solutions. Macromolecules. DOI: 10.1021/ma800521g.
- Hugh H. Richardson, Ignacio López-Garcı́a, Michele Sferrazza, Joseph L. Keddie (2004). Thickness dependence of structural relaxation in spin-cast, glassy polymer thin films. Physical Review E. DOI: 10.1103/physreve.70.051805.
- Khamael M. Abualnaja, Ahmed E. Alprol, M.A. Abu-Saied, Abdallah Tageldein Mansour, et al. (2021). Studying the Adsorptive Behavior of Poly(Acrylonitrile-co-Styrene) and Carbon Nanotubes (Nanocomposites) Impregnated with Adsorbent Materials towards Methyl Orange Dye. Nanomaterials. DOI: 10.3390/nano11051144.
- Yonggang Shangguan, Feng Chen, Erwen Jia, Yu Lin, et al. (2017). New Insight into Time-Temperature Correlation for Polymer Relaxations Ranging from Secondary Relaxation to Terminal Flow: Application of a Universal and Developed WLF Equation. Polymers. DOI: 10.3390/polym9110567.
- Jinfang Wang, Peter A. G. Cormack, David C. Sherrington, Ezat Khoshdel (2007). Synthesis and characterization of micrometer-sized molecularly imprinted spherical polymer particulates prepared via precipitation polymerization. Pure and Applied Chemistry. DOI: 10.1351/pac200779091505.
- Alireza F. Behbahani, Anastassia N. Rissanou, Georgios Kritikos, Manolis Doxastakis, et al. (2020). Conformations and Dynamics of Polymer Chains in Cis and Trans Polybutadiene/Silica Nanocomposites through Atomistic Simulations: From the Unentangled to the Entangled Regime. Macromolecules. DOI: 10.1021/acs.macromol.0c01030.
- Etienne Girard, Thierry Tassaing, Séverine Camy, Jean‐Stéphane Condoret, et al. (2012). Enhancement of Poly(vinyl ester) Solubility in Supercritical CO<sub>2</sub> by Partial Fluorination: The Key Role of Polymer–Polymer Interactions. Journal of the American Chemical Society. DOI: 10.1021/ja304585d.
- Reza Enayatifard, Majid Saeedi, Jafar Âkbari, Y H Tabatabaee (2009). Effect of Hydroxypropyl Methylcellulose and Ethyl Cellulose Content on Release Profile and Kinetics of Diltiazem HCl from Matrices. Tropical Journal of Pharmaceutical Research. DOI: 10.4314/tjpr.v8i5.48086.
- Mariana Chelu, Mónica Popa, Emma Adriana Ozon, Jeanina Pandele Cusu, et al. (2023). High-Content Aloe vera Based Hydrogels: Physicochemical and Pharmaceutical Properties. Polymers. DOI: 10.3390/polym15051312.
- W. H. Zhang, Xuemei Fan, Weiliang Tian, Wusheng Fan (2012). Polystyrene/nano-SiO2 composite microspheres fabricated by Pickering emulsion polymerization: Preparation, mechanisms and thermal properties. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2012.57.
- Kyung‐Youl Baek, Masami Kamigaito, Mitsuo Sawamoto (2002). Star poly(methyl methacrylate) with end‐functionalized arm chains by ruthenium‐catalyzed living radical polymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.10279.
- Vikas Dash (2010). Release Kinetic Studies of Aspirin Microcapsules from Ethyl Cellulose, Cellulose Acetate Phthalate and their Mixtures by Emulsion Solvent Evaporation Method. Scientia Pharmaceutica. DOI: 10.3797/scipharm.0908-09.
- Abdallah S. Elgharbawy, Abdel-Ghaffar M. El Demerdash, Wagih A. Sadik, Mosaad A. Kasaby, et al. (2024). Enhancing the Biodegradability, Water Solubility, and Thermal Properties of Polyvinyl Alcohol through Natural Polymer Blending: An Approach toward Sustainable Polymer Applications. Polymers. DOI: 10.3390/polym16152141.
- Tianying Jiang, Charles F. Zukoski (2012). Role of Particle Size and Polymer Length in Rheology of Colloid–Polymer Composites. Macromolecules. DOI: 10.1021/ma301184t.
- Kgabo Phillemon Matabola, A. R. de Vries, A. S. Luyt, Ravi Kumar (2011). Studies on single polymer composites of poly(methyl methacrylate) reinforced with electrospun nanofibers with a focus on their dynamic mechanical properties. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2011.61.
- María J. Galante, J. Borrajo, Roberto J. J. Williams, E. Girard-Reydet, et al. (2001). Double Phase Separation Induced by Polymerization in Ternary Blends of Epoxies with Polystyrene and Poly(methyl methacrylate). Macromolecules. DOI: 10.1021/ma000429a.
- Ming Luo, Jonathan R. Brown, Roddel A. Remy, Douglas M. Scott, et al. (2016). Determination of Interfacial Mixing in Tapered Block Polymer Thin Films: Experimental and Theoretical Investigations. Macromolecules. DOI: 10.1021/acs.macromol.6b00946.
- Sajeev Chandran, LailaF.A Asghar, Neelima Mantha (2008). Design and evaluation of ethyl cellulose based matrix tablets of ibuprofen with pH modulated release kinetics. Indian Journal of Pharmaceutical Sciences. DOI: 10.4103/0250-474x.45397.
- Oleksandr O. Mykhaylyk, Christine M. Fernyhough, Masayuki Okura, J. Patrick A. Fairclough, et al. (2010). Monodisperse macromolecules – A stepping stone to understanding industrial polymers. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2010.09.021.
- Kexin Qu, Jing Ma, Hua Zhang, Xuanjun Li (2024). Characterization of construction and physical properties of composite oleogel based on single low molecular weight wax and polymer ethyl cellulose. LWT. DOI: 10.1016/j.lwt.2024.115722.
- K. Dedecker, G. Groeninckx (1999). Reactive compatibilization of the polyamide 6/poly(phenylene oxide) blend by means of styrene-maleic anhydride copolymer. Journal of Applied Polymer Science. DOI: 10.1002/(sici)1097-4628(19990808)73:6<889::aid-app5>3.0.co;2-s.
- Mineto Uchiyama, Kotaro Satoh, Masami Kamigaito (2021). Stereospecific cationic RAFT polymerization of bulky vinyl ethers and stereoblock poly(vinyl alcohol) via mechanistic transformation to radical RAFT polymerization of vinyl acetate. Giant. DOI: 10.1016/j.giant.2021.100047.
- Chaiwat Norakankorn, Qinmin Pan, Garry L. Rempel, Suda Kiatkamjornwong (2007). Synthesis of Poly(methyl methacrylate) Nanoparticles Initiated by 2,2′‐Azoisobutyronitrile via Differential Microemulsion Polymerization. Macromolecular Rapid Communications. DOI: 10.1002/marc.200700035.
- Abdullah Ahmed Ali Ahmed, Abdullah M. Al-Hussam, A.M. Abdulwahab, Ahmed Nasser Ahmed Ali Ahmed (2018). The impact of sodium chloride as dopant on optical and electrical properties of polyvinyl alcohol. AIMS Materials Science. DOI: 10.3934/matersci.2018.3.533.
- Xinde Tang, Longcheng Gao, Xinghe Fan, Qifeng Zhou (2007). ABA‐type amphiphilic triblock copolymers containing <i>p</i>‐ethoxy azobenzene via atom transfer radical polymerization: Synthesis, characterization, and properties. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.21989.
- Zijuan Tang, David Gómez, Chenyang He, Sergiy Korposh, et al. (2020). A U-Shape Fibre-Optic pH Sensor Based on Hydrogen Bonding of Ethyl Cellulose With a Sol-Gel Matrix. Journal of Lightwave Technology. DOI: 10.1109/jlt.2020.3034563.
- Shotaro Ito, Raita Goseki, Takashi Ishizone, Akira Hirao (2013). Successive synthesis of well-defined multiarmed miktoarm star polymers by iterative methodology using living anionic polymerization. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2013.05.014.
- Ahmed Al-Jumaili, Kateryna Bazaka, Mohan V. Jacob (2017). Retention of Antibacterial Activity in Geranium Plasma Polymer Thin Films. Nanomaterials. DOI: 10.3390/nano7090270.
- Johannes S. Kanger, Cees Otto, M. Slotboom, Jan Greve (1996). Waveguide Raman Spectroscopy of Thin Polymer Layers and Monolayers of Biomolecules Using High Refractive Index Waveguides. The Journal of Physical Chemistry. DOI: 10.1021/jp952566t.
- Wei Lu, Caili Huang, Kunlun Hong, Nam‐Goo Kang, et al. (2016). Poly(1-adamantyl acrylate): Living Anionic Polymerization, Block Copolymerization, and Thermal Properties. Macromolecules. DOI: 10.1021/acs.macromol.6b01732.
- Alain Dupas, I. Hénaut, Jean-François Argillier, Thierry Aubry (2012). Mechanical Degradation Onset of Polyethylene Oxide Used as a Hydrosoluble Model Polymer for Enhanced Oil Recovery. Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles. DOI: 10.2516/ogst/2012028.
- Thomas R. Congdon, Bethany T. Dean, James Kasperczak-Wright, Caroline I. Biggs, et al. (2015). Probing the Biomimetic Ice Nucleation Inhibition Activity of Poly(vinyl alcohol) and Comparison to Synthetic and Biological Polymers. Biomacromolecules. DOI: 10.1021/acs.biomac.5b00774.
- Miriam Truffa Giachet, Michael Schilling, Kristen McCormick, Joy Mazurek, et al. (2014). Assessment of the composition and condition of animation cels made from cellulose acetate. Polymer Degradation and Stability. DOI: 10.1016/j.polymdegradstab.2014.03.009.
- Jeremy D. Moskowitz, Brooks A. Abel, Charles L. McCormick, Jeffrey S. Wiggins (2015). High molecular weight and low dispersity polyacrylonitrile by low temperature RAFT polymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.27806.
- José de la Fuente, Marina Fernández‐Sanz, Marta Fernández‐García, Enrique López Madruga (2001). Solvent Effects on the Synthesis of Poly(methyl methacrylate) by Atom-Transfer Radical Polymerization (ATRP). Macromolecular Chemistry and Physics. DOI: 10.1002/1521-3935(20010801)202:12<2565::aid-macp2565>3.0.co;2-4.
- Deborah A. Barkley, Naisheng Jiang, Mani Sen, Maya K. Endoh, et al. (2017). Chain Conformation near the Buried Interface in Nanoparticle-Stabilized Polymer Thin Films. Macromolecules. DOI: 10.1021/acs.macromol.7b01187.
- Yaping Li (2012). Amphiphilic graft copolymer based on poly(styrene-co-maleic anhydride) with low molecular weight polyethylenimine for efficient gene delivery. International Journal of Nanomedicine. DOI: 10.2147/ijn.s32069.
- Susilawati Susilawati (2009). Dose Response and Optical Properties of Dyed Poly Vinyl Alcohol-Trichloroacetic Acid Polymeric Blends Irradiated with Gamma-Rays. American Journal of Applied Sciences. DOI: 10.3844/ajassp.2009.2071.2077.
- John M. Sebastian, Richard A. Register (2001). Block copolymer molecular weight determination via gel permeation chromatography: Choosing a combining rule. Journal of Applied Polymer Science. DOI: 10.1002/app.2051.
- Mojca Božič, Thomas Elschner, Doris Tkaučič, Matej Bračič, et al. (2018). Effect of different surface active polysaccharide derivatives on the formation of ethyl cellulose particles by the emulsion-solvent evaporation method. Cellulose. DOI: 10.1007/s10570-018-2062-2.
- Wontae Hwang, Guoqing Xin, Minjun Cho, Sung‐Min Cho, et al. (2012). Electrospray deposition of polymer thin films for organic light-emitting diodes. Nanoscale Research Letters. DOI: 10.1186/1556-276x-7-52.
- Ralf Seemann, Karin Jacobs, Katharina Landfester, Stephan Herminghaus (2006). Freezing of polymer thin films and surfaces: The small molecular weight puzzle. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.20920.
- Gonzalo R. Quezada, Norman Toro, Jorge H. Saavedra, Pedro Robles, et al. (2021). Molecular Dynamics Study of the Conformation, Ion Adsorption, Diffusion, and Water Structure of Soluble Polymers in Saline Solutions. Polymers. DOI: 10.3390/polym13203550.
- Mustafa Kamal, E.M. Abdelrazek, N.M. Sellow, A. M. Abdelghany (2018). Synthesis and optimization of Novel Chitosan/Cellulose Acetate Natural Polymer Membrane for water treatment. JOURNAL OF ADVANCES IN PHYSICS. DOI: 10.24297/jap.v14i1.7183.
- Jun Wu, J. Pablo Tomba, Mitchell A. Winnik, Rajeev Farwaha, et al. (2004). Effect of Gel Content on Polymer Diffusion in Poly(vinyl acetate-<i>c</i><i>o</i>-dibutyl maleate) Latex Films. Macromolecules. DOI: 10.1021/ma040018k.
- Indrė Šveikauskaitė, Vitalis Briedis (2017). Effect of Film-Forming Polymers on Release of Naftifine Hydrochloride from Nail Lacquers. International Journal of Polymer Science. DOI: 10.1155/2017/1476270.
- Paul Drzaic, Anne M. Gonzales (1993). Refractive index gradients and light scattering in polymer-dispersed liquid crystal films. Applied Physics Letters. DOI: 10.1063/1.108721.
- Natalia Casís, Diana A. Estenoz, Luis M. Gugliotta, Haydée Oliva, et al. (2006). Heterogeneous bulk polymerization of styrene in the presence of polybutadiene: Calculation of the macromolecular structure. Journal of Applied Polymer Science. DOI: 10.1002/app.22902.
- Zhiya Ma, Yueping Guan, Xianqiao Liu, Huizhou Liu (2005). Covalent immobilization of albumin on micron‐sized magnetic poly(methyl methacrylate‐divinylbenzene‐glycidyl methacrylate) microspheres prepared by modified suspension polymerization. Polymers for Advanced Technologies. DOI: 10.1002/pat.618.
- Shuanglin Wu, Jiayi Shi, Xiaolin Nie, Yingmei Yao, et al. (2021). Microporous Cyclodextrin Film with Funnel‐type Channel Polymerized on Electrospun Cellulose Acetate Membrane as Separators for Strong Trapping Polysulfides and Boosting Charging in Lithium–Sulfur Batteries. Energy & environment materials. DOI: 10.1002/eem2.12319.
- Magdi El Messiry, Nermin Fadel (2019). The tensile properties of electrospun Poly Vinyl Chloride and Cellulose Acetate (PVC/CA) bi-component polymers nanofibers. Alexandria Engineering Journal. DOI: 10.1016/j.aej.2019.08.003.
- Veera Sadhu, Jürgen Pionteck, Dieter Voigt, Hartmut Komber, et al. (2004). Atom‐Transfer Radical Polymerization: A Strategy for the Synthesis of Halogen‐Free Amino‐Functionalized Poly(methyl methacrylate) in a One‐Pot Reaction. Macromolecular Chemistry and Physics. DOI: 10.1002/macp.200400092.
- Judit E. Puskás, Yongmoon Kwon (2006). Biomacromolecular engineering: design, synthesis and characterization. One‐pot synthesis of block copolymers of arborescent polyisobutylene and polystyrene. Polymers for Advanced Technologies. DOI: 10.1002/pat.770.
- Research article (1986). 1: Final Report on the Safety Assessment of Hydroxyethylcellulose, Hydroxypropylcellulose, Methylcellulose, Hydroxypropyl Methylcellulose, and Cellulose Gum. Journal of the American College of Toxicology. DOI: 10.3109/10915818609141925.
- A. H. Abdel‐Alim, A. E. Hamielec (1974). GPC calibration for water-soluble polymers. Journal of Applied Polymer Science. DOI: 10.1002/app.1974.070180125.
- Stephan Kobben, Anitha Ethirajan, Tanja Junkers (2014). Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.27180.
- Manuel Martín‐Pastor, Edmont Stoyanov (2020). Mechanism of interaction between hydroxypropyl cellulose and water in aqueous solutions: Importance of polymer chain length. Journal of Polymer Science. DOI: 10.1002/pol.20200185.
- Aamer A.M. Alfayyadh, Salah Lotfy, Ahmed A. Basfar, Mutasim I. Khalil (2017). Influences of poly (vinyl alcohol) molecular weight and carbon nanotubes on radiation crosslinking shape memory polymers. Progress in Natural Science Materials International. DOI: 10.1016/j.pnsc.2017.04.015.
- Shi‐Qing Wang (2008). The tip of iceberg in nonlinear polymer rheology: Entangled liquids are “solids”. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.21588.
- ImadA Abu-Yousef, Durai Prabu, Amin F. Majdalawieh, Kadambari Inbasekaran, et al. (2016). Preparation and characterization of gatifloxacin-loaded sodium alginate hydrogel membranes supplemented with hydroxypropyl methylcellulose and hydroxypropyl cellulose polymers for wound dressing. International Journal of Pharmaceutical Investigation. DOI: 10.4103/2230-973x.177810.
- Víctor Bonal, José A. Quintana, José M. Villalvilla, Rafael Muñoz‐Mármol, et al. (2021). Simultaneous Determination of Refractive Index and Thickness of Submicron Optical Polymer Films from Transmission Spectra. Polymers. DOI: 10.3390/polym13152545.
- Musarat Amina, Nawal M. Al Musayeib, Nawal A. Alarfaj, Maha F. El‐Tohamy, et al. (2019). Exploiting the Potential of<i>Moringa oleifera</i>Oil/Polyvinyl Chloride Polymeric Bionanocomposite Film Enriched with Silver Nanoparticles for Antimicrobial Activity. International Journal of Polymer Science. DOI: 10.1155/2019/5678149.
- H. Ali, Cleuzilene Silva, Betina Royer, Guimes Rodrigues Filho, et al. (2017). Chemically Modified Polyvinyl Chloride for Removal of Thionine Dye (Lauth’s Violet). Materials. DOI: 10.3390/ma10111298.
- Zilong Li, Zilong Li, An Lv, Lei Li, et al. (2013). Periodic ethylene-vinyl alcohol copolymers via ADMET polymerization: Synthesis, characterization, and thermal property. Polymer. DOI: 10.1016/j.polymer.2013.05.037.
- Bin Yang, Brooks A. Abel, Charles L. McCormick, Robson F. Storey (2017). Synthesis of Polyisobutylene Bottlebrush Polymers via Ring-Opening Metathesis Polymerization. Macromolecules. DOI: 10.1021/acs.macromol.7b01655.
- Cécile Dalle-Ferrier, Kristine Niss, Alexei P. Sokolov, B. Frick, et al. (2010). The Role of Chain Length in Nonergodicity Factor and Fragility of Polymers. Macromolecules. DOI: 10.1021/ma101622f.
- William N. Sharratt, A. D. Brooker, Eric S. J. Robles, João T. Cabral (2018). Microfluidic solvent extraction of poly(vinyl alcohol) droplets: effect of polymer structure on particle and capsule formation. Soft Matter. DOI: 10.1039/c7sm02488f.
- А Н Васильев, Tommy Lorenz, Cornelia Breitkopf (2020). Thermal Conductivity of Polyisoprene and Polybutadiene from Molecular Dynamics Simulations and Transient Measurements. Polymers. DOI: 10.3390/polym12051081.
- Iryna Gozhyk, Mathieu Boudreau, H. Rabbani Haghighi, N. Djellali, et al. (2015). Gain properties of dye-doped polymer thin films. Physical Review B. DOI: 10.1103/physrevb.92.214202.
- Chun‐Yi Chang‐Chien, Chun‐Han Hsu, Tsung‐Ying Lee, Che‐Wei Liu, et al. (2007). Synthesis of Carbon and Silica Hollow Spheres with Mesoporous Shells using Polyethylene Oxide/Phenol Formaldehyde Polymer Blend. European Journal of Inorganic Chemistry. DOI: 10.1002/ejic.200700210.
- Hou Chen, Rongjun Qu, Chunnuan Ji, Chunhua Wang, et al. (2005). Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl<sub>3</sub>/isophthalic acid. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.21174.
- M. W. J. Van Den Esker, Jozua Lavèn, A. Broeckman, A. Vrij (1976). Incompatibility of polymer solutions. II. Concentration and angle dependence of the light scattering in the system polystyrene + polyisobutylene + toluene. Journal of Polymer Science Polymer Physics Edition. DOI: 10.1002/pol.1976.180141104.
- Mónica Moreno, M. Ali Aboudzadeh, Marı́a J. Barandiaran, David Mecerreyes (2011). Facile incorporation of natural carboxylic acids into polymers via polymerization of protic ionic liquids. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.25882.
- Utku Gürel, Sinan Keten, Andrea Giuntoli (2024). Bidispersity Improves the Toughness and Impact Resistance of Star-Polymer Thin Films. ACS Macro Letters. DOI: 10.1021/acsmacrolett.3c00671.
- Jagannath Sahoo, A A Mallick, B B Barik, Prakash Ch. Senapati (2007). Preparation and in vitro evaluation of ethyl cellulose microspheres containing stavudine by the double emulsion method. Die Pharmazie. DOI: 10.31083/ph.2007.2.6076.
- Philip B. V. Scholten, Jérémy Demarteau, Sandro Gennen, Julien De Winter, et al. (2018). Merging CO<sub>2</sub>-Based Building Blocks with Cobalt-Mediated Radical Polymerization for the Synthesis of Functional Poly(vinyl alcohol)s. Macromolecules. DOI: 10.1021/acs.macromol.8b00492.
- Minna Annala, Mika Lahelin, Jyri Seppälä (2012). Utilization of poly(methyl methacrylate) – carbon nanotube and polystyrene – carbon nanotube in situ polymerized composites as masterbatches for melt mixing. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2012.87.
- Fatima Tuz Zahra, Ying Zhang, Adeolu Oluwaseun Ajayi, Quincy Quick, et al. (2024). Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone. Polymers. DOI: 10.3390/polym16091217.
- F. Campise, L. E. Roth, Rodolfo H. Acosta, Marcelo A. Villar, et al. (2015). Contribution of Linear Guest and Structural Pendant Chains to Relaxational Dynamics in Model Polymer Networks Probed by Time-Domain <sup>1</sup>H NMR. Macromolecules. DOI: 10.1021/acs.macromol.5b01806.
- Jialong Shen, Erol Yıldırım, Shanshan Li, Yavuz Çaydamlı, et al. (2019). Role of Local Polymer Conformations on the Diverging Glass Transition Temperatures and Dynamic Fragilities of Isotactic-, Syndiotactic-, and Atactic-Poly(methyl methacrylate)s. Macromolecules. DOI: 10.1021/acs.macromol.9b00434.
- Basak Tuna, Hadj Benkreira (2018). Reactive Extrusion of Polyamide 6 Using a Novel Chain Extender. Polymer Engineering and Science. DOI: 10.1002/pen.24944.
- Jasjeet Kaur, Keith R. Millington, Jackie Y. Cai (2016). Rheology of polyacrylonitrile‐based precursor polymers produced from controlled (RAFT) and conventional polymerization: Its role in solution spinning. Journal of Applied Polymer Science. DOI: 10.1002/app.44273.
- Panagiotis Dimitrakellis, Εvangelos Gogolides, Angelos Zeniou, Kamil Awsiuk, et al. (2017). Transition between stable hydrophilization and fast etching/hydrophilization of poly(methyl)methacrylate polymer using a novel atmospheric pressure dielectric barrier discharge source. Journal of Vacuum Science & Technology A Vacuum Surfaces and Films. DOI: 10.1116/1.4984613.
- Abbas Akhgari, Ali Tavakol (2016). Prediction of Optimum Combination of Eudragit RS/Eudragit RL/Ethyl Cellulose Polymeric Free Films Based on Experimental Design for Using as a Coating System for Sustained Release Theophylline Pellets. Advanced Pharmaceutical Bulletin. DOI: 10.15171/apb.2016.030.
- Yu-Ting Chou, Wei Chih Lee, Shengsheng Yu (2024). Efficient Synthesis of Ultrahigh Molecular Weight Poly(methyl methacrylate) via Visible Light-Induced RAFT Polymerization in Deep Eutectic Solvent. Macromolecules. DOI: 10.1021/acs.macromol.4c01519.
- Eugene Kim, Edward J. Krämer, Paul D. Garrett, Robert A. Mendelson, et al. (1995). Surface segregation in blends of styrene-acrylonitrile copolymers. Polymer. DOI: 10.1016/0032-3861(95)97344-f.
- M. Broglia, Diego F. Acevedo, Denise Langheinrich, Heidi R. Pérez‐Hernández, et al. (2015). Rapid Fabrication of Periodic Patterns on Poly(styrene-co-acrylonitrile) Surfaces Using Direct Laser Interference Patterning. International Journal of Polymer Science. DOI: 10.1155/2015/721035.
- Flávia da Silva Müller Teixeira, Augusto Cesar de Carvalho Peres, Élen Beatriz Acordi Vasques Pacheco (2023). Mechanical recycling of acrylonitrile-butadiene-styrene copolymer and high impact polystyrene from waste electrical and electronic equipment to comply with the circular economy. Frontiers in Sustainability. DOI: 10.3389/frsus.2023.1203457.
- Marcus Schäfer, Philipp C. Wieland, Oskar Nuyken (2002). Synthesis of new graft copolymers containing polyisobutylene by a combination of the 1,1‐diphenylethylene technique and cationic polymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.10472.
- Carlos David Grande‐Tovar, William Vallejo, Fabio Zuluaga (2018). Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization. Molecules. DOI: 10.3390/molecules23092218.
- Yue Liu, Long Cao, Linshan Wang, Yanjiao Qi, et al. (2024). Preparation and Application of Degradable Lignin/Poly (Vinyl Alcohol) Polymers as Urea Slow-Release Coating Materials. Molecules. DOI: 10.3390/molecules29081699.
- Shiro Kobayashi, Hiroshi Uyama, Jang Hyun Choi, Yasuhiro Matsumoto (1991). Preparation of Micron-size Monodisperse Polymer Particles by Dispersion Copolymerization of Methyl Methacrylate with Poly(2-oxazoline) Macromonomer.. Proceedings of the Japan Academy Series B. DOI: 10.2183/pjab.67.140.
- Wenyan Huang, Weikai Gu, Hongjun Yang, Xiaoqiang Xue, et al. (2017). Preparation and Properties of Branched Polystyrene through Radical Suspension Polymerization. Polymers. DOI: 10.3390/polym9010014.
- Urszula Szeluga, Paweł Moryc (2013). Viscoelastic properties and morphology of dicyanate ester/epoxy co-polymers modified with polysiloxane and butadiene–acrylonitrile rubbers. Journal of Thermal Analysis and Calorimetry. DOI: 10.1007/s10973-012-2899-9.
- Shuxian Tang, Ying Zhao, Haitao Wang, Yuqiao Wang, et al. (2018). Preparation of the Sodium Alginate-g-(Polyacrylic Acid-co-Allyltrimethylammonium Chloride) Polyampholytic Superabsorbent Polymer and Its Dye Adsorption Property. Marine Drugs. DOI: 10.3390/md16120476.
- Kimiko SATOH, Kozo Takayama, Yoshiharu Machida, Yoshiki Suzuki, et al. (1989). Disintegration and dissolution characteristics of compressed tablets consisting of hydroxypropyl cellulose and carboxyvinyl polymer.. Chemical and Pharmaceutical Bulletin. DOI: 10.1248/cpb.37.1642.
- Beike Cai, Shaodong Zhang, Yongfeng Zhou (2021). Green Stereoregular Polymerization of Poly(methyl methacrylate)s Through Vesicular Catalysis. CCS Chemistry. DOI: 10.31635/ccschem.021.202101011.
- Yanfen Zhang, Xiang Chen, Leikai Li, Wei Chen, et al. (2019). Mesoporous Polymer Loading Heteropolyacid Catalysts: One-Step Strategy To Manufacture High Value-Added Cellulose Acetate Propionate. ACS Sustainable Chemistry & Engineering. DOI: 10.1021/acssuschemeng.8b05627.
- Yoshinori Yamaguchi, Zhenqing Li, Xifang Zhu, Chenchen Liu, et al. (2015). Polyethylene Oxide (PEO) and Polyethylene Glycol (PEG) Polymer Sieving Matrix for RNA Capillary Electrophoresis. PLoS ONE. DOI: 10.1371/journal.pone.0123406.
- Ewelina Ortyl, S. Kucharski (2003). Refractive index modulation in polymeric photochromic films. Open Chemistry. DOI: 10.2478/bf02479265.
- Daniel Funes-Hernando, Pablo Hermosilla, Eugenio Vispe, Andrea Di Giuseppe, et al. (2018). Vinylidene-based polymers by Rh(<scp>i</scp>)-NHC catalyzed thiol–yne click polymerization: synthesis, characterization and post-polymerization modification. Polymer Chemistry. DOI: 10.1039/c8py00261d.
- Silindokuhle Jakavula, Azile Nqombolo, Anele Mpupa, Jianwei Ren, et al. (2023). Hybrid porous material supported in a cellulose acetate polymeric membrane for the direct immersion thin-film microextraction of parabens in water. Journal of Chromatography A. DOI: 10.1016/j.chroma.2023.464187.
- Asako Narita, Juro Oshima, Yuko Iso, Shuma Hasegawa, et al. (2021). Red-sensitive organic nanoparticle-polymer composite materials for volume holographic gratings with large refractive index modulation amplitudes. Optical Materials Express. DOI: 10.1364/ome.415422.
- Fathi Elashhab, Lobna Sheha, M. Abdalkhalek, Hussein A. Khalaf (2013). The influence of gamma irradiation on the intrinsic properties of cellulose acetate polymers. Journal of the Association of Arab Universities for Basic and Applied Sciences. DOI: 10.1016/j.jaubas.2012.12.001.
- Laura Susana Acosta‐Torres, F. H. Barceló‐Santana, Carlos Alvarez‐Gayosso, J. Reyes‐Gasga (2008). Synthesis and characterization of poly(methyl methacrylate) polymerized by microwave energy or conventional water bath. Journal of Applied Polymer Science. DOI: 10.1002/app.28569.
- Jinghui Hu, Weiqiang Tang, Yonghui Li, Jiyu He, et al. (2020). The Effect of Glycidyl Azide Polymer Grafted Tetrafunctional Isocyanate on Polytriazole Polyethylene Oxide-Tetrahydrofuran Elastomer and its Propellant Properties. Polymers. DOI: 10.3390/polym12020278.
- Igor Ayesta, Joseba Zubía, J. Arrué, M. A. Illarramendi, et al. (2017). Characterization of Chromatic Dispersion and Refractive Index of Polymer Optical Fibers. Polymers. DOI: 10.3390/polym9120730.
- Tao Ding, Qian Wu, Zhen Nie, Mianping Zheng, et al. (2022). Selective recovery of lithium resources in salt lakes by polyacrylonitrile/ion-imprinted polymer: Synthesis, testing, and computation. Polymer Testing. DOI: 10.1016/j.polymertesting.2022.107647.
- Xiaoqian Zhang, Wenli Guo, Yibo Wu, Yuwei Shang, et al. (2018). Synthesis of random copolymer of isobutylene with <i>p</i> -methylstyrene by cationic polymerization in ionic liquids. e-Polymers. DOI: 10.1515/epoly-2018-0017.
- Martina Hrabalíková, Pavlína Holčapková, Pavol Šuly, Vladimír Sedlařík (2016). Immobilization of bacteriocin nisin into a poly(vinyl alcohol) polymer matrix crosslinked with nontoxic dicarboxylic acid. Journal of Applied Polymer Science. DOI: 10.1002/app.43674.
- Fei Ma, Jian Zhu, Zhengbiao Zhang, Xiangqiang Pan, et al. (2013). Seleno‐containing poly(vinyl acetate) prepared by diselenocarbonates‐mediated controlled free radical polymerizations. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.26701.
- Tso‐Pei Chiu, Trong‐Ming Don (2008). Synthesis and characterization of poly(methyl methacrylate) nanoparticles by emulsifier‐free emulsion polymerization with a redox‐initiated system. Journal of Applied Polymer Science. DOI: 10.1002/app.28386.
- W. H. Embree, J. M. Mitchell, H. Leverne Williams (1951). COMPOSITIONAL HETEROGENEITY OF BUTADIENE–ACRYLONITRILE COPOLYMERS PREPARED IN EMULSION AT 5°C. Canadian Journal of Chemistry. DOI: 10.1139/v51-031.
- Marta Sieradzka, Janusz Fabia, Dorota Biniaś, Ryszard Fryczkowski, et al. (2020). The Role of Reduced Graphene Oxide in the Suspension Polymerization of Styrene and Its Effect on the Morphology and Thermal Properties of the Polystyrene/rGO Nanocomposites. Polymers. DOI: 10.3390/polym12071468.
- Shuangshuang Zhang, Lu Yin, Junzhi Wang, Wei Zhang, et al. (2017). A Green Platform for Preparation of the Well-Defined Polyacrylonitrile: 60Co γ-ray Irradiation-Initiated RAFT Polymerization at Room Temperature. Polymers. DOI: 10.3390/polym9010026.
- R J Lee, Zeinab Abbas Jawad, Abdul Latif Ahmad, Jia Qiang Ngo, et al. (2017). Improvement of CO<sub>2</sub>/N<sub>2</sub>separation performance by polymer matrix cellulose acetate butyrate. IOP Conference Series Materials Science and Engineering. DOI: 10.1088/1757-899x/206/1/012072.
- Nigel Clarke, Lian R. Hutchings, Ian Robinson, Judith A. Elder, et al. (2009). Suspension polymerization of poly(methyl methacrylate)/clay nanocomposites. Journal of Applied Polymer Science. DOI: 10.1002/app.30128.
- Saki Yoshida, Shu Kikuchi, Shinji Kanehashi, Kazuo Okamoto, et al. (2018). Microfluidic Fabrication of Morphology-Controlled Polymeric Microspheres of Blends of Poly(4-butyltriphenylamine) and Poly(methyl methacrylate). Materials. DOI: 10.3390/ma11040582.
- Y.N. Sudhakar, M. Selvakumar, D. Krishna Bhat (2022). Enhancement and investigation of biodegradability of poly (methyl methacrylate) and poly (vinyl chloride) by blending with biodegradable polymer. Polymer Bulletin. DOI: 10.1007/s00289-022-04319-7.
- Ebru Kondolot Solak, Akın Er (2015). pH-sensitive interpenetrating polymer network microspheres of poly(vinyl alcohol) and carboxymethyl cellulose for controlled release of the nonsteroidal anti-inflammatory drug ketorolac tromethamine. Artificial Cells Nanomedicine and Biotechnology. DOI: 10.3109/21691401.2014.982805.
- Jirui Zhang, William Pointer, Georgios Patias, Lucas Al-Shok, et al. (2022). End functionalization of polyisoprene and polymyrcene obtained by anionic polymerization via one-pot ring-opening mono-addition of epoxides. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2022.111755.
- Cédric Van Goethem, Mikael Monga Mulunda, Rhea Verbeke, Tönjes Koschine, et al. (2018). Increasing Membrane Permeability by Increasing the Polymer Crystallinity: The Unique Case of Polythiophenes. Macromolecules. DOI: 10.1021/acs.macromol.8b01635.
- Voon Huey Lim, Yuji Yamashita, Yen Doan, Yasuhisa Adachi (2018). Inhibition of Cationic Polymer-Induced Colloid Flocculation by Polyacrylic Acid. Water. DOI: 10.3390/w10091215.
- A.M. Al-Sabagh, M.E. Hassan, S.D.M. Dosouky, N. M. Nasser, et al. (2015). Preparation of some thermal stable polymers based on diesters of polyethylene and polypropylene oxides macro monomers to use as surfactants at high temperature and pressure. Egyptian Journal of Petroleum. DOI: 10.1016/j.ejpe.2015.08.001.
- Paula Obreja, Dana Cristea, M. Purica, Raluca Gavrilă, et al. (2007). Polymers doped with metal oxide nanoparticles with controlled refractive index. Polimery. DOI: 10.14314/polimery.2007.679.
- Zhuoqun Wang, Rinaldo Poli, Christophe Detrembleur, Antoine Debuigne (2019). Organometallic-Mediated Radical (Co)polymerization of γ-Methylene-γ-Butyrolactone: Access to pH-Responsive Poly(vinyl alcohol) Derivatives. Macromolecules. DOI: 10.1021/acs.macromol.9b01838.
- Qiaohuan Cheng, Zhanxia Lü, Hugh J. Byrne (2009). Synthesis of a maleic anhydride grafted polypropylene–butadiene copolymer and its application in polypropylene/styrene–butadiene–styrene triblock copolymer/organophilic montmorillonite composites as a compatibilizer. Journal of Applied Polymer Science. DOI: 10.1002/app.30678.
- W. Y. Lee (1978). Calibration of the gel permeation chromatography polyester resins. Journal of Applied Polymer Science. DOI: 10.1002/app.1978.070221128.
- Julien Fage, Konrad Knoll, Norbert Nießner, Oliver Carstensen, et al. (2019). Poly (Butyl Acrylate)-Graft-Polystyrene Synthesis by Free-Radical Polymerization: Interplay between Structure, Morphology, Mechanical, and Optical Properties. Polymers. DOI: 10.3390/polym11081317.
- Mitra Jelvehgari, Maryam Maghsoodi, Hossein Nemati (2010). Development of theophylline floating microballoons using cellulose acetate butyrate and/or Eudragit RL 100 polymers with different permeability characteristics.. PubMed.
- Hiroki Nara, Toshiyuki Momma, Tetsuya Ōsaka (2008). Feasibility of an Interpenetrated Polymer Network System Made of Di-block Copolymer Composed of Polyethylene Oxide and Polystyrene as the Gel Electrolyte for Lithium Secondary Batteries. Electrochemistry. DOI: 10.5796/electrochemistry.76.276.
- Yukiya Kitayama, Shunsuke Takigawa, Atsushi Harada (2023). Effect of Poly(Vinyl Alcohol) Concentration and Chain Length on Polymer Nanogel Formation in Aqueous Dispersion Polymerization. Molecules. DOI: 10.3390/molecules28083493.
- Darya A. Kuznetsova, Dinar R. Gabdrakhmanov, Denis M. Kuznetsov, С. С. Лукашенко, et al. (2021). Polymer–Colloid Complexes Based on Cationic Imidazolium Amphiphile, Polyacrylic Acid and DNA Decamer. Molecules. DOI: 10.3390/molecules26082363.
- Zaida Urbán‐Morlán (2017). Preparation of Ethyl Cellulose Nanoparticles by Solvent-Displacement Using the Conventional Method and a Recirculation System. Journal of the Mexican Chemical Society. DOI: 10.29356/jmcs.v59i3.32.
- Chunjing Zhang, Shian Zhong, Zhengpeng Yang (2008). Cellulose acetate-based molecularly imprinted polymeric membrane for separation of vanillin and o-vanillin. Brazilian Journal of Chemical Engineering. DOI: 10.1590/s0104-66322008000200014.
- Abdulaziz Ibrahim Al‐Ghonamy, A. A. El‐Wakil, Mohamed Ramadan (2010). Enhancement the Thermal Stability and the Mechanical Properties of Acrylonitrile-Butadiene Copolymer by Grafting Antioxidant. International Journal of Polymer Science. DOI: 10.1155/2010/981690.
- Zhengfeng Zhu, Xiangyu Shi, Jie Zhou, Xiangfei Li, et al. (2024). A gel polymer electrolyte obtained from cellulose acetate/polyvinylidene fluoride composite electrospun membrane for safe lithium metal batteries with high-rate capability. Polymer. DOI: 10.1016/j.polymer.2024.127412.
- Hiroyuki Ohno, Yoko KAWAMURA (2010). Analysis of Acrylonitrile, 1,3-Butadiene, and Related Compounds in Acrylonitrile-Butadiene-Styrene Copolymers for Kitchen Utensils and Children's Toys by Headspace Gas Chromatography/Mass Spectrometry. Journal of AOAC International. DOI: 10.1093/jaoac/93.6.1965.
- Ruoyu Hong, Tian Pan, Y.P. Han, S. Z. Zhang, et al. (2007). Graft polymerization synthesis and application of magnetic Fe<sub>3</sub>O<sub>4</sub>/polyacrylic acid composite nanoparticles. Journal of Applied Polymer Science. DOI: 10.1002/app.25142.
- Suthisa Onthong, Thirawudh Pongprayoon, Edgar A. O’Rear (2024). Sequential Admicellar Polymerization of Polyindole and Poly(vinyl Acetate) for Increasing Electrical Conductivity and Water Dispersion of Multiwalled Carbon Nanotubes. ACS Applied Polymer Materials. DOI: 10.1021/acsapm.4c02885.
- G. Pérez Belloch, Manuel Salmerón‐Sánchez, José Luís Gómez Ribelles, Manuel Monleón Pradas, et al. (1999). Conformational motions in immiscible blends of polycarbonate and styrene‐acrylonitrile copolymers. Polymer Engineering and Science. DOI: 10.1002/pen.11457.
- Kazunari Yoshida, Keitaro Horii, Azusa Saito, Akito Takashima, et al. (2017). Confinement Effects on Polymer Dynamics: Thermo-Responsive Behaviours of Hydroxypropyl Cellulose Polymers in Phospholipid-Coated Droplets (Water-in-Oil Emulsion). Polymers. DOI: 10.3390/polym9120680.
- Garima Tripathi, Deepak Srivastava (2011). Study on the Effect of Carboxyl Terminated Butadiene Acrylonitrile (CTBN) Copolymer Concentration on the Decomposition Kinetics Parameters of Blends of Glycidyl Epoxy and Non-Glycidyl Epoxy Resin. International Journal of Organic Chemistry. DOI: 10.4236/ijoc.2011.13016.
- Jianfei Li, Hongchi Zhao, Wantai Yang (2023). Preparation, acidolysis kinetics and scale inhibition performance of low molecular weight poly(maleic anhydride‐<i>alt</i>‐vinyl acetate) based on self‐stabilized precipitation polymerization. Journal of Applied Polymer Science. DOI: 10.1002/app.54475.
- Andrei A. Korigodskii, Artem E. Zhirnov, A. S. Kechek’yan, S. B. Zezin (2022). Transparent Polymer Blends of Poly(methyl methacrylate) and Poly(propylene glycol). Polymers. DOI: 10.3390/polym14112171.
- Gaishi Murakami, Tomohiro Kubo, Kotaro Satoh (2023). Precision Synthesis of End-Functionalized Star Poly(vinyl alcohol)s by RAFT Polymerization and Post-polymerization Modification. Precision Chemistry. DOI: 10.1021/prechem.3c00051.
- Mona Amrihesari, Amari Murry, Blair Brettmann (2023). Towards standardized polymer solubility measurements using a parallel crystallizer. Polymer. DOI: 10.1016/j.polymer.2023.125983.
- Tamara Alhilfi, Pierre Chambon, Steve P. Rannard (2020). Architectural control of polystyrene physical properties using branched anionic polymerization initiated at ambient temperature. Journal of Polymer Science. DOI: 10.1002/pol.20200143.
- Mikel Azkune, Ángel Ortega-Gomez, Igor Ayesta, Joseba Zubía (2020). Refractive-Index Profile Reconstruction in Graded-Index Polymer Optical Fibers Using Raman Spectroscopy. Materials. DOI: 10.3390/ma13102251.
- Xu Yao, Qinwen Wang, Yuanbo Wang, Falu Hu, et al. (2024). One-Step Synthesis of Polyethyleneimine-Grafted Styrene-Maleic Anhydride Copolymer Adsorbents for Effective Adsorption of Anionic Dyes. Molecules. DOI: 10.3390/molecules29081887.
- Tong-Wei Li, Shuqiang Yang, Shuai Li (2016). Preparation and characterisation of perovskite La0.8Sr0.2Ga0.83Mg0.17O2.815 electrolyte using a poly(vinyl alcohol) polymeric method. Journal of Advanced Ceramics. DOI: 10.1007/s40145-016-0186-0.
- Morgan Lecoublet, Mohamed Ragoubi, Léonel Kenfack, Nathalie Leblanc, et al. (2023). How Do 3D Printing Parameters Affect the Dielectric and Mechanical Performance of Polylactic Acid–Cellulose Acetate Polymer Blends?. Journal of Composites Science. DOI: 10.3390/jcs7120492.
- Antónia Gonçalves, Fernando Rocha, Berta N. Estevinho (2022). Application of Ethyl Cellulose and Ethyl Cellulose + Polyethylene Glycol for the Development of Polymer-Based Formulations using Spray-Drying Technology for Retinoic Acid Encapsulation. Foods. DOI: 10.3390/foods11162533.
- S. Chibowski, Elżbieta Grządka, J. Patkowski (2009). Influence of a Type of Electrolyte and its Ionic Strength on the Adsorption and the Structure of Adsorbed Polymer Layer in the System: Polyacrylic Acid/SiO2. University of Zagreb University Computing Centre (SRCE).
- Katya Kamenova, Иван Илиев, Anna Prancheva, Pencho Tuleshkov, et al. (2024). Hydroxypropyl Cellulose Hydrogel Containing Origanum vulgare ssp. hirtum Essential-Oil-Loaded Polymeric Micelles for Enhanced Treatment of Melanoma. Gels. DOI: 10.3390/gels10100627.
- Mariusz Nowak, Damian Semba, Dušan Mišić, Tomasz Półbrat, et al. (2023). The transformation of cellulose acetate into a new biocidal polymer by effluent-free grafting in supercritical carbon dioxide. The Journal of Supercritical Fluids. DOI: 10.1016/j.supflu.2023.106058.
- Masao Horio, Eiichi Kamei, Hisataka UCHIMURA (1985). Dynamic Measurements on Polymer Liquid Crystals - Aqueous Solutions of Hydroxypropyl Cellulose. Nihon Reoroji Gakkaishi. DOI: 10.1678/rheology1973.13.1_25.
- Hossein Abdolmohammad‐Zadeh, Marzieh Ahari Salmasi (2018). A Nano-Composite Based on Fe3O4@Styrene-Maleic Anhydride Copolymer as a Magnetic Sorbent for Preconcentration of Silver(I) Ion. Analytical and bioanalytical chemistry research. DOI: 10.22036/abcr.2017.88163.1147.
- James M. Hart, Solomon M. Kimani, Lian R. Hutchings, Isabelle Grillo, et al. (2016). Spontaneous Nanoparticle Dispersal in Polybutadiene by Brush-Forming End-Functional Polymers. Macromolecules. DOI: 10.1021/acs.macromol.5b02318.
- Lian R. Hutchings, Randal W. Richards, Stuart W. Reynolds, Richard L. Thompson (2001). Small-Angle Neutron Scattering from Single Arm Labeled Polybutadiene Star Polymers in Dilute Solution. Macromolecules. DOI: 10.1021/ma010048c.
- Diana Cholakova, Krastina Tsvetkova, V. Yordanova, Kristina Rusanova, et al. (2025). Hydroxypropyl Cellulose Polymers as Efficient Emulsion Stabilizers: The Effect of Molecular Weight and Overlap Concentration. Gels. DOI: 10.3390/gels11020113.
- David Seelinger, Markus Biesalski (2023). Cross-Linking of Oxidized Hydroxypropyl Cellulose in Paper: Influence of Molecular Weight and Polymer Distribution on Paper Wet Strength Development. Gels. DOI: 10.3390/gels9030206.
- Eglė Zelbienė, Gailutė Drakšienė, Arūnas Savickas, Dalia M. Kopustinskienė, et al. (2015). In vitro permeation studies of phenolics from horse chestnut seed gels prepared with different polyacrylic acid polymer derivatives. Acta Pharmaceutica. DOI: 10.1515/acph-2015-0013.
- Sams Mohammad Anowar Sadat, Md Saiful Islam, Sheikh Tasnim Jahan, Jakir Ahmed Chowdhury, et al. (1970). Effect of Cellulosic and Polymethacrylic Polymers on Drug Content, Particle Morphology, and Carbamazepine Release Profiles from Sustained Release Ethyl Cellulose Microspheres. Dhaka University Journal of Pharmaceutical Sciences. DOI: 10.3329/dujps.v9i2.7883.
- K. Chowdoji Rao, K.S.V. Krishna Rao, N. N. Mallikarjuna, B. Vijaya Kumar Naidu, et al. (2005). Spectrophotometric investigation of laser dye diffusion in styrene–acrylonitrile copolymer solutions. Journal of Applied Polymer Science. DOI: 10.1002/app.21397.
- Hirohisa Yoshida, Yasuji Kobayashi, Reiko Yoshida (1982). ANNEALING EFFECT ON MIGRATION OF ACRYLONITRILE MONOMER FROM STYRENE-ACRYLONITRILE COPOLYMER. Sen i Gakkaishi. DOI: 10.2115/fiber.38.11_t457.
- Ramón Díaz de León, Florentino Soriano‐Corral, Francisco Javier Enríquez‐Medrano, Gabriela Bosques Ibarra, et al. (2016). Synthesis of High<i> cis</i>-Polybutadiene in Styrene Solution with Neodymium-Based Catalysts: Towards the Preparation of HIPS and ABS via<i> In Situ</i> Bulk Polymerization. International Journal of Polymer Science. DOI: 10.1155/2016/9841896.
- A E George, Jackson S. Bryant, Timothy Taylor, Michael J. Bortner, et al. (2025). Impact of polymer molecular weight blends on the powder bed fusion process and the properties of polypropylene printed parts. RSC Applied Polymers. DOI: 10.1039/d5lp00055f.
- Yusuf Wibisono, Shari Amalia Rachmawati, Vera Septyaningrum Mylani, Shinta Rosalia Dewi, et al. (2022). Cellulose acetate polymer matrix loaded Olea europaea nanosolids as low fouling membrane composite. Alexandria Engineering Journal. DOI: 10.1016/j.aej.2022.08.036.
- Shi Chin Ng, Zeinab Abbas Jawad, Peng Chee Tan, Fui Chin Bridgid Lai, et al. (2020). Influence of Polymer Blending of Cellulose Acetate Butyrate for CO2/N2 Separation. Journal of Physical Science. DOI: 10.21315/jps2020.31.1.5.
- Rajan Rajabalaya, Li-Qun Tor, Sheba R. David (2012). Formulation And In Vitro Evaluation Of Ondansetron Hydrochloride Matrix Transdermal Systems Using Ethyl Cellulose/Polyvinyl Pyrrolidone Polymer Blends. Zenodo (CERN European Organization for Nuclear Research). DOI: 10.5281/zenodo.1078377.
- Isao Ikeda, Takayuki Hirose, Kimihiro Suzuki (1997). Immobilization of Azo-initiator and Subsequent Graft Polymerization of Vinyl Monomers on Cellulose and Cellulose Acetate.. Sen i Gakkaishi. DOI: 10.2115/fiber.53.111.
- Farnaz Ghonjizade-Samani, Laia Haurie, Ramón Malet, Marc Pérez, et al. (2024). Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer. Polymers. DOI: 10.3390/polym16070923.
- Britania Janet Gutiérrez Rafael, Orlando Zaca-Morán, R. Delgado‐Macuil, Hugo Martínez‐Gutiérrez, et al. (2024). Study of the Incorporation of Gel and Aloe vera Peel Extract in a Polymer Matrix Based on Polyvinylpyrrolidone. Polymers. DOI: 10.3390/polym16141998.
- Nawal A. Alarfaj, Musarat Amina, Nawal M. Al Musayeib, Maha F. El‐Tohamy, et al. (2021). Immunomodulatory and Antiprotozoal Potential of Fabricated Sesamum radiatum Oil/Polyvinylpyrrolidone/Au Polymeric Bionanocomposite Film. Polymers. DOI: 10.3390/polym13244321.
- Shahriar Arjmand (2014). Investigation of spatial configuration of Polypropylene and the influence of Molecular Weight Distribution, Catalyst type and Tacticity on mechanical, Thermal and optical properties of polymers. IOSR Journal of Polymer and Textile Engineering. DOI: 10.9790/019x-0133745.
- Deepti S. Desphande, R. Bajpai, A. K. Bajpai (2013). Polyacrylonitrile reinforced PVA based‐polymeric networks: Structural, morphological, and mechanical aspects. Polymer Engineering and Science. DOI: 10.1002/pen.23803.
- Luís Henrique Alves Cândido, Diego Borja Ferreira, Wilson Kindlein Júnior, Renan Demori, et al. (2014). Recycling cycle of materials applied to acrylonitrile-butadiene-styrene/policarbonate blends with styrene-butadiene-styrene copolymer addition. AIP conference proceedings. DOI: 10.1063/1.4873865.
- Zsófia Osváth (2020). Recent Advances in the Synthesis and Analysis of Polyamide 6 and Products Therefrom: From Polymerization Chemistry of ε-Caprolactam to Thermoplastic Resin Transfer Molding (T-RTM). Academic Journal of Polymer Science. DOI: 10.19080/ajop.2020.04.555629.
- Research article (2023). Liquid Polymer Electrolytes: Molar Conductivity Behaviour of Various Lithium Salts in Polyethylene Oxide Systems at Ambient Temperature. Malaysian Journal of Chemistry. DOI: 10.55373/mjchem.v25i4.99.
- Esti Hendradi, Rahayuningtyas, Tristiana Erawati (2023). The Effect of Polymers Ratio Carboxymethyl Chitosan, Polyvinyl Pyrolidone K-30, and Ethyl Cellulose N22 on Physico-Chemical Characteristics and Drug Release from Matrix Type Diclofenac Potassium Patch. JURNAL FARMASI DAN ILMU KEFARMASIAN INDONESIA. DOI: 10.20473/jfiki.v10i12023.54-61.
- Magfirah Magfirah, Indah kurnia utami (2022). Formulation and evaluation of transdermal patches of leaf ethanol extract Lantana Camara Linn with ethyl cellulose-poly vinyl pyrolidone polymer variations. World Journal of Advanced Research and Reviews. DOI: 10.30574/wjarr.2022.15.3.0915.
- Kazuhiko Kandori, Gohki Yonekawa (2014). Preparation and characterization of uniform pseudocubic hematite particles by utilizing polyethylene oxide polymers in forced hydrolysis reaction. Journal of the Ceramic Society of Japan. DOI: 10.2109/jcersj2.122.795.
- Muhaimin Muhaimin, Roland Bodmeier (2025). Polymer type effect on microparticle blend of ethyl cellulose, poly(lactic‐<i>co</i>‐glycolic acid) and poly(ε‐caprolactone) for controlled drug delivery with varying solubility. Polymer International. DOI: 10.1002/pi.6774.
- Ayman A. Ameen, Suneet Kumar Awasthi, Ahmed M. El‐Sherbeeny, Mostafa R. Abukhadra, et al. (2025). One-dimensional porous photonic crystals comprising poly-vinyl alcohol-polymer doped with crystal violet and carbol-fuchsine dyes as a sensitive gamma rays dosimeter. Journal of Radiation Research and Applied Sciences. DOI: 10.1016/j.jrras.2025.101459.
- Yangyang Nie, Guan-Tao Yang, Haiyan Wang, Xiaoqiang Qiao (2023). Modified styrene-maleic anhydride copolymer-based chromatographic stationary phase for phospholipid separation and analysis. Chinese Journal of Chromatography. DOI: 10.3724/sp.j.1123.2023.02011.
- A F Kishway, Ramadan Abouomar, Mohamed Bakry, Mohamed A. Ebiad, et al. (2025). Investigation of thermodynamic and solubility properties of poly (4-methyl styrene - alt - maleic anhydride) and poly (4-methyl styrene - alt - n-propyl maleimide) copolymers by inverse gas chromatography. Journal of Chromatography A. DOI: 10.1016/j.chroma.2025.465744.
- Min Wang, Xingxing Yang, Guoyan Duan, Wei Wang (2023). Properties of acrylonitrile styrene acrylate copolymer modified eucalyptus/polyvinyl chloride composites. BioResources. DOI: 10.15376/biores.18.1.1812-1823.
- Wantai Yang (2012). SURFACTANT-FREE EMULSION POLYMERIZATION OF METHYL METHACRYLATE INITIATED BY α-METHYL STYRENE-MALEIC ANHYDRIDE COPOLYMER MACROINITIATOR. Acta Polymerica Sinica.
- Xiaopin Duan, Jisheng Xiao, Yin Q, Zhang ZW, et al. (2012). Amphiphilic graft copolymer based on poly(styrene-co-maleic anhydride) with low molecular weight polyethylenimine for efficient gene delivery. DOAJ (DOAJ: Directory of Open Access Journals).
- Fatemeh Shiri Jafarzadeh, Mostafa Vatani, Ahmadreza Raisi (2025). A novel blend membrane modified Pebax-1657 with high-loading styrene-acrylonitrile copolymer for CO₂ separation. Journal of CO2 Utilization. DOI: 10.1016/j.jcou.2025.103271.
- Lapporn Vayachuta, Pranee Phinyocheep, Daniel Derouet, Sagrario Pascual (2010). Synthesis of ATRP macroinitiator based on synthetic cis- 1,4-polyisoprene and its application for graft polymerization of MMA. e-Polymers. DOI: 10.1515/epoly.2010.10.1.292.
- Barbara M. Jauch (1997). Kinetic study of styrene/maleic anhydride copolymers using succine anhydride as the model compound. RIT Scholar Works (Rochester Institute of Technology).
- HIROSHI NINOMIYA, Eiichi Kamei, Sadao HOSHINO (1977). Extensional Properties of Styrene-Acrylonitrile Copolymers at Elevated Temperatures. Nihon Reoroji Gakkaishi. DOI: 10.1678/rheology1973.5.2_83.