Research Cluster
Synthesis and Characterization
This cluster contains 510 public open-access papers related to synthesis, polymerization, characterization, spectroscopy, nmr, ftir, raman. Use it as a starting bibliography for method checks, literature review, and citation-backed page expansion.
- Mathias Ulbricht (2006). Advanced functional polymer membranes. Polymer. DOI: 10.1016/j.polymer.2006.01.084.
- A. Manuel Stephan, Kee Suk Nahm (2006). Review on composite polymer electrolytes for lithium batteries. Polymer. DOI: 10.1016/j.polymer.2006.05.069.
- Sunsun Li, Long Ye, Wenchao Zhao, Hongping Yan, et al. (2018). A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells. Journal of the American Chemical Society. DOI: 10.1021/jacs.8b02695.
- Research article (1996). Particulate-filled polymer composites. Polymer Testing. DOI: 10.1016/0142-9418(96)00004-9.
- Balázs Imre, Béla Pukánszky (2013). Compatibilization in bio-based and biodegradable polymer blends. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2013.01.019.
- C. M. Tseng, Yongchang Lu, Mohamed S. El‐Aasser, J. W. Vanderhoff (1986). Uniform polymer particles by dispersion polymerization in alcohol. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.1986.080241126.
- Galina Satchanska, Slavena Davidova, Petar Petrov (2024). Natural and Synthetic Polymers for Biomedical and Environmental Applications. Polymers. DOI: 10.3390/polym16081159.
- Joon Seok Lee, Kyu Ha Choi, Han Do Ghim, Sam Soo Kim, et al. (2004). Role of molecular weight of atactic poly(vinyl alcohol) (PVA) in the structure and properties of PVA nanofabric prepared by electrospinning. Journal of Applied Polymer Science. DOI: 10.1002/app.20602.
- Steffen Fischer, Katrin Thümmler, Bert Volkert, Kay Hettrich, et al. (2008). Properties and Applications of Cellulose Acetate. Macromolecular Symposia. DOI: 10.1002/masy.200850210.
- Zhiya Ma, Yueping Guan, Huizhou Liu (2005). Synthesis and characterization of micron‐sized monodisperse superparamagnetic polymer particles with amino groups. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.20803.
- Irem Erel-Unal, Svetlana A. Sukhishvili (2008). Hydrogen-Bonded Multilayers of a Neutral Polymer and a Polyphenol. Macromolecules. DOI: 10.1021/ma800186q.
- Mohammed Mohammed, Anwar Ja’afar Mohamad Jawad, Aeshah M. Mohammed, Jawad K. Oleiwi, et al. (2023). Challenges and advancement in water absorption of natural fiber-reinforced polymer composites. Polymer Testing. DOI: 10.1016/j.polymertesting.2023.108083.
- Bivash Dasgupta, Shang-You Tee, John C. Crocker, Barbara J. Frisken, et al. (2002). Microrheology of polyethylene oxide using diffusing wave spectroscopy and single scattering. Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics. DOI: 10.1103/physreve.65.051505.
- Weiwei Li, W. S. Christian Roelofs, Martijn M. Wienk, René A. J. Janssen (2012). Enhancing the Photocurrent in Diketopyrrolopyrrole-Based Polymer Solar Cells via Energy Level Control. Journal of the American Chemical Society. DOI: 10.1021/ja305358z.
- Brian J. Landi, Ryne P. Raffaelle, Stephanie L. Castro, Sheila G. Bailey (2005). Single‐wall carbon nanotube–polymer solar cells. Progress in Photovoltaics Research and Applications. DOI: 10.1002/pip.604.
- Sandy P. S. Koo, Milan M. Stamenović, R. Arun Prasath, Andrew Inglis, et al. (2010). Limitations of radical thiol‐ene reactions for polymer–polymer conjugation. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.23933.
- Jiaqi Du, Ke Hu, Jinyuan Zhang, Lei Meng, et al. (2021). Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design. Nature Communications. DOI: 10.1038/s41467-021-25638-9.
- Gregory T. Fieldson, Timothy A. Barbari (1993). The use of FTi.r.-a.t.r. spectroscopy to characterize penetrant diffusion in polymers. Polymer. DOI: 10.1016/0032-3861(93)90765-3.
- Cheol Park, J. F. G. Wilkinson, Sumanth Banda, Zoubeida Ounaies, et al. (2006). Aligned single‐wall carbon nanotube polymer composites using an electric field. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.20823.
- Matthias Bartholmai, Bernhard Schartel (2004). Layered silicate polymer nanocomposites: new approach or illusion for fire retardancy? Investigations of the potentials and the tasks using a model system. Polymers for Advanced Technologies. DOI: 10.1002/pat.483.
- Joseph A. Akkara, Kris Senecal, David L. Kaplan (1991). Synthesis and characterization of polymers produced by horseradish peroxidase in dioxane. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.1991.080291105.
- Roar R. Søndergaard, Martin Helgesen, Mikkel Jørgensen, Frederik C. Krebs (2010). Fabrication of Polymer Solar Cells Using Aqueous Processing for All Layers Including the Metal Back Electrode. Advanced Energy Materials. DOI: 10.1002/aenm.201000007.
- Han Yu, Mingao Pan, Rui Sun, Indunil Agunawela, et al. (2021). Regio‐Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All‐Polymer Solar Cells with 15.2 % Efficiency. Angewandte Chemie International Edition. DOI: 10.1002/anie.202016284.
- Sang Cheon Lee, Kang Moo Huh, Jaehwi Lee, Yong Woo Cho, et al. (2006). Hydrotropic Polymeric Micelles for Enhanced Paclitaxel Solubility: In Vitro and In Vivo Characterization. Biomacromolecules. DOI: 10.1021/bm060307b.
- Vahid Vajihinejad, Sarang P. Gumfekar, Behnaz Bazoubandi, Zahra Rostami Najafabadi, et al. (2018). Water Soluble Polymer Flocculants: Synthesis, Characterization, and Performance Assessment. Macromolecular Materials and Engineering. DOI: 10.1002/mame.201800526.
- Kuldeep Singh, Anil Ohlan, Parveen Saini, S.K. Dhawan (2007). Poly (3,4‐ethylenedioxythiophene) <i>γ</i>‐Fe<sub>2</sub>O<sub>3</sub> polymer composite–super paramagnetic behavior and variable range hopping 1D conduction mechanism–synthesis and characterization. Polymers for Advanced Technologies. DOI: 10.1002/pat.1003.
- Lei Zheng, Sheng Hong, Grégoire Cardoen, Engin Burgaz, et al. (2004). Polymer Nanocomposites through Controlled Self-Assembly of Cubic Silsesquioxane Scaffolds. Macromolecules. DOI: 10.1021/ma048557c.
- Christopher M. Bates, Alice B. Chang, Nebojša Momčilović, Simon C. Jones, et al. (2015). ABA Triblock Brush Polymers: Synthesis, Self-Assembly, Conductivity, and Rheological Properties. Macromolecules. DOI: 10.1021/acs.macromol.5b00880.
- Victoria J. Cunningham, Abdullah M. Alswieleh, Kate L. Thompson, Mark Williams, et al. (2014). Poly(glycerol monomethacrylate)–Poly(benzyl methacrylate) Diblock Copolymer Nanoparticles via RAFT Emulsion Polymerization: Synthesis, Characterization, and Interfacial Activity. Macromolecules. DOI: 10.1021/ma501140h.
- Jiangtao Xu, Cyrille Boyer (2015). Visible Light Photocatalytic Thiol–Ene Reaction: An Elegant Approach for Fast Polymer Postfunctionalization and Step-Growth Polymerization. Macromolecules. DOI: 10.1021/ma502460t.
- Do Heung Kim, Wontae Jang, Keonwoo Choi, Ji Sung Choi, et al. (2020). One-step vapor-phase synthesis of transparent high refractive index sulfur-containing polymers. Science Advances. DOI: 10.1126/sciadv.abb5320.
- Milene M. E. Costa, Elaine Christine de Magalhães Cabral Albuquerque, Tito Lívio Moitinho Alves, José Carlos Pinto, et al. (2013). Use of Polyhydroxybutyrate and Ethyl Cellulose for Coating of Urea Granules. Journal of Agricultural and Food Chemistry. DOI: 10.1021/jf401185y.
- Zoha M. AL‐Badri, Abhigyan Som, Sarah K. Lyon, Christopher F. Nelson, et al. (2008). Investigating the Effect of Increasing Charge Density on the Hemolytic Activity of Synthetic Antimicrobial Polymers. Biomacromolecules. DOI: 10.1021/bm800569x.
- Xiaofeng Yi, Zhiqun Xu, Yan Liu, Guo Xueyong, et al. (2017). Highly efficient removal of uranium(<scp>vi</scp>) from wastewater by polyacrylic acid hydrogels. RSC Advances. DOI: 10.1039/c6ra26846c.
- Adrián J. Nuñez, Pablo C. Sturm, J. M. Kenny, Mirta I. Aranguren, et al. (2003). Mechanical characterization of polypropylene–wood flour composites. Journal of Applied Polymer Science. DOI: 10.1002/app.11738.
- Alberto Sanz de León, A. Domínguez-Calvo, Sergio I. Molina (2019). Materials with enhanced adhesive properties based on acrylonitrile-butadiene-styrene (ABS)/thermoplastic polyurethane (TPU) blends for fused filament fabrication (FFF). Materials & Design. DOI: 10.1016/j.matdes.2019.108044.
- Shiwang Cheng, Bobby Carroll, Wei Lu, Fei Fan, et al. (2017). Interfacial Properties of Polymer Nanocomposites: Role of Chain Rigidity and Dynamic Heterogeneity Length Scale. Macromolecules. DOI: 10.1021/acs.macromol.6b02816.
- Marcel Schubert, Brian A. Collins, Hannah Mangold, Ian A. Howard, et al. (2014). Correlated Donor/Acceptor Crystal Orientation Controls Photocurrent Generation in All‐Polymer Solar Cells. Advanced Functional Materials. DOI: 10.1002/adfm.201304216.
- Jingyu Si, Benjamin Tawiah, Wei-Long Sun, Bo Lin, et al. (2019). Functionalization of MXene Nanosheets for Polystyrene towards High Thermal Stability and Flame Retardant Properties. Polymers. DOI: 10.3390/polym11060976.
- Jenny Faucheu, Catherine Gauthier, Laurent Chazeau, J.Y. Cavaillé, et al. (2009). Miniemulsion polymerization for synthesis of structured clay/polymer nanocomposites: Short review and recent advances. Polymer. DOI: 10.1016/j.polymer.2009.11.044.
- Mariano Pracellà, Md. Minhaz‐Ul Haque, Vera A. Álvarez (2010). Functionalization, Compatibilization and Properties of Polyolefin Composites with Natural Fibers. Polymers. DOI: 10.3390/polym2040554.
- Koji Fukao, Shinobu Uno, Yoshihisa Miyamoto, Akitaka Hoshino, et al. (2001). Dynamics of<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>α</mml:mi></mml:math>and<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>β</mml:mi></mml:math>processes in thin polymer films: Poly(vinyl acetate) and poly(methyl methacrylate). Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics. DOI: 10.1103/physreve.64.051807.
- Dylan J. Walsh, Devin A. Schinski, Robert A. Schneider, Damien Guironnet (2020). General route to design polymer molecular weight distributions through flow chemistry. Nature Communications. DOI: 10.1038/s41467-020-16874-6.
- D. Britton, Frank Heatley, Peter A. Lovell (1998). Chain Transfer to Polymer in Free-Radical Bulk and Emulsion Polymerization of Vinyl Acetate Studied by NMR Spectroscopy. Macromolecules. DOI: 10.1021/ma971284j.
- Yingdong Luo, Damien Montarnal, Sangwon Kim, Weichao Shi, et al. (2015). Poly(dimethylsiloxane-<i>b</i>-methyl methacrylate): A Promising Candidate for Sub-10 nm Patterning. Macromolecules. DOI: 10.1021/acs.macromol.5b00518.
- Fengkui Li, Richard C. Larock (2000). Thermosetting polymers from cationic copolymerization of tung oil: Synthesis and characterization. Journal of Applied Polymer Science. DOI: 10.1002/1097-4628(20001031)78:5<1044::aid-app130>3.0.co;2-a.
- Valentina Siracusa, Ignazio Blanco, Santina Romani, Urszula Tylewicz, et al. (2012). Poly(lactic acid)‐modified films for food packaging application: Physical, mechanical, and barrier behavior. Journal of Applied Polymer Science. DOI: 10.1002/app.36829.
- Aamir Shabbir, Hadi Goldansaz, Ole Hassager, Evelyne van Ruymbeke, et al. (2015). Effect of Hydrogen Bonding on Linear and Nonlinear Rheology of Entangled Polymer Melts. Macromolecules. DOI: 10.1021/acs.macromol.5b00757.
- Naiying Du, Gilles P. Robertson, Ingo Pinnau, Michael D. Guiver (2010). Polymers of Intrinsic Microporosity with Dinaphthyl and Thianthrene Segments. Macromolecules. DOI: 10.1021/ma101930x.
- Sérgio Neves Monteiro, Foluke Salgado de Assis, Carlos A. Ferreira, Noan Tonini Simonassi, et al. (2018). Fique Fabric: A Promising Reinforcement for Polymer Composites. Polymers. DOI: 10.3390/polym10030246.
- Xin Du, Junhui He (2008). Facile size‐controllable syntheses of highly monodisperse polystyrene nano‐ and microspheres by polyvinylpyrrolidone‐mediated emulsifier‐free emulsion polymerization. Journal of Applied Polymer Science. DOI: 10.1002/app.27774.
- Zhi Yang, Shiying Zheng, William J. Harrison, John Harder, et al. (2007). Long-Circulating Near-Infrared Fluorescence Core-Cross-Linked Polymeric Micelles: Synthesis, Characterization, and Dual Nuclear/Optical Imaging. Biomacromolecules. DOI: 10.1021/bm7005399.
- Emily M. W. Tsang, Zhaobin Zhang, Ami C. C. Yang, Zhiqing Shi, et al. (2009). Nanostructure, Morphology, and Properties of Fluorous Copolymers Bearing Ionic Grafts. Macromolecules. DOI: 10.1021/ma901740f.
- Yichun Yuan, Konpal Raheja, Nathalie B. Milbrandt, Sophia Beilharz, et al. (2023). Thermoresponsive polymers with LCST transition: synthesis, characterization, and their impact on biomedical frontiers. RSC Applied Polymers. DOI: 10.1039/d3lp00114h.
- Sarah J. Hardman, Norazilawati Muhamad-Sarih, Helen J. Riggs, Richard L. Thompson, et al. (2011). Electrospinning Superhydrophobic Fibers Using Surface Segregating End-Functionalized Polymer Additives. Macromolecules. DOI: 10.1021/ma200852z.
- Michael Schilling, Michel Bouchard, Herant Khanjian, Tom Learner, et al. (2010). Application of Chemical and Thermal Analysis Methods for Studying Cellulose Ester Plastics. Accounts of Chemical Research. DOI: 10.1021/ar1000132.
- Tejas Shah, Dilip V. Vasava (2019). A glimpse of biodegradable polymers and their biomedical applications. e-Polymers. DOI: 10.1515/epoly-2019-0041.
- Gang Li, Zhihao Deng, Minkun Cai, Kaixi Huang, et al. (2021). A stretchable and adhesive ionic conductor based on polyacrylic acid and deep eutectic solvents. npj Flexible Electronics. DOI: 10.1038/s41528-021-00118-8.
- Nutifafa Y. Doumon, Mikhail V. Dryzhov, Félix Houard, Vincent M. Le Corre, et al. (2019). Photostability of Fullerene and Non-Fullerene Polymer Solar Cells: The Role of the Acceptor. ACS Applied Materials & Interfaces. DOI: 10.1021/acsami.8b20493.
- Timothy J. White (2018). Photomechanical effects in liquid crystalline polymer networks and elastomers. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.24576.
- Tilen Kopač, Michela Abrami, Mario Grassi, Aleš Ručigaj, et al. (2021). Polysaccharide-based hydrogels crosslink density equation: A rheological and LF-NMR study of polymer-polymer interactions. Carbohydrate Polymers. DOI: 10.1016/j.carbpol.2021.118895.
- Saurabh Shah, Paras Famta, Rajeev Singh Raghuvanshi, Shashi Bala Singh, et al. (2021). Lipid polymer hybrid nanocarriers: Insights into synthesis aspects, characterization, release mechanisms, surface functionalization and potential implications. Colloids and Interface Science Communications. DOI: 10.1016/j.colcom.2021.100570.
- Qian Li, Joseph Imbrogno, Georges Belfort, Xiao‐Lin Wang (2014). Making polymeric membranes antifouling via “grafting from” polymerization of zwitterions. Journal of Applied Polymer Science. DOI: 10.1002/app.41781.
- Yongguang Wang, Shaochun Tang, Sascha Vongehr, Junaid Ali Syed, et al. (2016). High-Performance Flexible Solid-State Carbon Cloth Supercapacitors Based on Highly Processible N-Graphene Doped Polyacrylic Acid/Polyaniline Composites. Scientific Reports. DOI: 10.1038/srep12883.
- Jie Zhang, Tianwen Bai, Weixi Liu, Mingzhao Li, et al. (2023). All-organic polymeric materials with high refractive index and excellent transparency. Nature Communications. DOI: 10.1038/s41467-023-39125-w.
- Abhijeet P. Bapat, Jacob G. Ray, Daniel A. Savin, Emily A. Hoff, et al. (2012). Dynamic-covalent nanostructures prepared by Diels–Alder reactions of styrene-maleic anhydride-derived copolymers obtained by one-step cascade block copolymerization. Polymer Chemistry. DOI: 10.1039/c2py20351k.
- Jingnan Wu, Zhaoheng Ling, Leandro R. Franco, Sang Young Jeong, et al. (2023). On the Conformation of Dimeric Acceptors and Their Polymer Solar Cells with Efficiency over 18 %. Angewandte Chemie International Edition. DOI: 10.1002/anie.202302888.
- Gustavo F. de Paula, Germano I. Netto, L. H. C. Mattoso (2011). Physical and Chemical Characterization of Poly(hexamethylene biguanide) Hydrochloride. Polymers. DOI: 10.3390/polym3020928.
- Elena Llorens, Elaine Armelín, Maria M. Pérez‐Madrigal, Luís J. del Valle, et al. (2013). Nanomembranes and Nanofibers from Biodegradable Conducting Polymers. Polymers. DOI: 10.3390/polym5031115.
- Tety Sudiarti, Deana Wahyuningrum, Bunbun Bundjali, I Made Arcana (2017). Mechanical strength and ionic conductivity of polymer electrolyte membranes prepared from cellulose acetate-lithium perchlorate. IOP Conference Series Materials Science and Engineering. DOI: 10.1088/1757-899x/223/1/012052.
- Tomoo Shiomi, Frank E. Karasz, William J. MacKnight (1986). Compatibility in blends of two random copolymers having a common monomer segment. Macromolecules. DOI: 10.1021/ma00162a028.
- Kevin Kauffman, Clement Do, Sadhana Sharma, Matthew D. Gallovic, et al. (2012). Synthesis and Characterization of Acetalated Dextran Polymer and Microparticles with Ethanol as a Degradation Product. ACS Applied Materials & Interfaces. DOI: 10.1021/am3008888.
- Ioannis S. Polios, Maria Soliman, Chin Lee, Samuel P. Gido, et al. (1997). Late Stages of Phase Separation in a Binary Polymer Blend Studied by Rheology, Optical and Electron Microscopy, and Solid State NMR. Macromolecules. DOI: 10.1021/ma9701292.
- Mohammad T. ALSamman, Julio Sánchez (2022). Chitosan- and Alginate-Based Hydrogels for the Adsorption of Anionic and Cationic Dyes from Water. Polymers. DOI: 10.3390/polym14081498.
- Sébastien Perny, Jürgen Allgaier, Dong-Hyun Cho, Wonmok Lee, et al. (2001). Synthesis and Structural Analysis of an H-Shaped Polybutadiene. Macromolecules. DOI: 10.1021/ma001608v.
- Cynthia Graciela Flores‐Hernandez, María de los Ángeles Cornejo-Villegas, Abigail Moreno-Martell, Alicia Del Real (2021). Synthesis of a Biodegradable Polymer of Poly (Sodium Alginate/Ethyl Acrylate). Polymers. DOI: 10.3390/polym13040504.
- M. Selvakumar, D. Krishna Bhat (2008). LiClO<sub>4</sub> doped cellulose acetate as biodegradable polymer electrolyte for supercapacitors. Journal of Applied Polymer Science. DOI: 10.1002/app.28671.
- Xuefang Zheng, Qi Lian, Hua Yang, Xiuping Wang (2016). Surface Molecularly Imprinted Polymer of Chitosan Grafted Poly(methyl methacrylate) for 5-Fluorouracil and Controlled Release. Scientific Reports. DOI: 10.1038/srep21409.
- Laila H. Gaabour (2021). Effect of addition of TiO2 nanoparticles on structural and dielectric properties of polystyrene/polyvinyl chloride polymer blend. AIP Advances. DOI: 10.1063/5.0062445.
- Shuichi Tanoue, Leszek A. Utracki, A. García‐Rejón, J. Tatibouët, et al. (2004). Melt compounding of different grades of polystyrene with organoclay. Part 1: Compounding and characterization. Polymer Engineering and Science. DOI: 10.1002/pen.20098.
- Sarah E. Grieshaber, Alexandra J. E. Farran, Sheng Lin‐Gibson, Kristi L. Kiick, et al. (2009). Synthesis and Characterization of Elastin−Mimetic Hybrid Polymers with Multiblock, Alternating Molecular Architecture and Elastomeric Properties. Macromolecules. DOI: 10.1021/ma802791z.
- Jan Dijk, J. Smit, F. E. Kohn, Jan Feijén (1983). Characterization of poly(<scp>D</scp>,<scp>L</scp>‐lactic acid) by gel permeation chromatography. Journal of Polymer Science Polymer Chemistry Edition. DOI: 10.1002/pol.1983.170210121.
- Vincenzo Taresco, Rhiannon Creasey, Jeremy Thomas Kennon, Giuseppe Mantovani, et al. (2016). Variation in structure and properties of poly(glycerol adipate) via control of chain branching during enzymatic synthesis. Polymer. DOI: 10.1016/j.polymer.2016.02.036.
- Guillaume G. Hedir, Craig A. Bell, Rachel K. O’Reilly, Andrew P. Dove (2015). Functional Degradable Polymers by Radical Ring-Opening Copolymerization of MDO and Vinyl Bromobutanoate: Synthesis, Degradability and Post-Polymerization Modification. Biomacromolecules. DOI: 10.1021/acs.biomac.5b00476.
- K. Sownthari, S. Austin Suthanthiraraj (2013). Synthesis and characterization of an electrolyte system based on a biodegradable polymer. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2013.46.
- Jun Ma, Chong Cheng, Guorong Sun, Karen L. Wooley (2008). Well-Defined Polymers Bearing Pendent Alkene Functionalities via Selective RAFT Polymerization. Macromolecules. DOI: 10.1021/ma802057u.
- Pambingal Rajan Sruthi, Saithalavi Anas (2020). An overview of synthetic modification of nitrile group in polymers and applications. Journal of Polymer Science. DOI: 10.1002/pol.20190190.
- Muna Abu‐Dalo, Saja A. Al-Rosan, Borhan Albiss (2021). Photocatalytic Degradation of Methylene Blue Using Polymeric Membranes Based on Cellulose Acetate Impregnated with ZnO Nanostructures. Polymers. DOI: 10.3390/polym13193451.
- Rushita Shah, Pavel Stodůlka, Kateřina Skopalová, Petr Sáha (2019). Dual Crosslinked Collagen/Chitosan Film for Potential Biomedical Applications. Polymers. DOI: 10.3390/polym11122094.
- Jiuyang Zhang, Deborah K. Schneiderman, Tuoqi Li, Marc A. Hillmyer, et al. (2016). Design of Graft Block Polymer Thermoplastics. Macromolecules. DOI: 10.1021/acs.macromol.6b02033.
- Kou Fujita, Norihiro Nishiyama, Kimiya Nemoto, Tamami Okada, et al. (2005). Effect of Base Monomer's Refractive Index on Curing Depth and Polymerization Conversion of Photo-cured Resin Composites. Dental Materials Journal. DOI: 10.4012/dmj.24.403.
- Amy A. Cockram, Thomas J. Neal, Matthew J. Derry, Oleksandr O. Mykhaylyk, et al. (2017). Effect of Monomer Solubility on the Evolution of Copolymer Morphology during Polymerization-Induced Self-Assembly in Aqueous Solution. Macromolecules. DOI: 10.1021/acs.macromol.6b02309.
- Tong Huang, Motohiro Miura, Shogo Nobukawa, Masayuki Yamaguchi (2015). Chain Packing and Its Anomalous Effect on Mechanical Toughness for Poly(lactic acid). Biomacromolecules. DOI: 10.1021/acs.biomac.5b00293.
- Sofia Nunes, Francesca Ramacciotti, Artur Neves, Eva Mariasole Angelin, et al. (2020). A diagnostic tool for assessing the conservation condition of cellulose nitrate and acetate in heritage collections: quantifying the degree of substitution by infrared spectroscopy. Heritage Science. DOI: 10.1186/s40494-020-00373-4.
- Edwin Gonzalez, D. Olmos, Miguel Ángel Lorente, Itziar Vélaz, et al. (2018). Preparation and Characterization of Polymer Composite Materials Based on PLA/TiO2 for Antibacterial Packaging. Polymers. DOI: 10.3390/polym10121365.
- Víctor Vega‐Mayoral, Claudia Backes, Damien Hanlon, Umar Khan, et al. (2015). Photoluminescence from Liquid‐Exfoliated WS<sub>2</sub> Monomers in Poly(Vinyl Alcohol) Polymer Composites. Advanced Functional Materials. DOI: 10.1002/adfm.201503863.
- Sabyasachi Maiti, Santanu Kaity, Somasree Ray, Biswanath Sa (2011). Development and evaluation of xanthan gum-facilitated ethyl cellulose microsponges for controlled percutaneous delivery of diclofenac sodium. Acta Pharmaceutica. DOI: 10.2478/v10007-011-0022-6.
- Zhiyi Yang, Chang Dae Han (2008). Rheology of Miscible Polymer Blends with Hydrogen Bonding. Macromolecules. DOI: 10.1021/ma7025385.
- Yue Ma, Jun Ma, Jingchao Chai, Zhihong Liu, et al. (2017). Two Players Make a Formidable Combination: In Situ Generated Poly(acrylic anhydride-2-methyl-acrylic acid-2-oxirane-ethyl ester-methyl methacrylate) Cross-Linking Gel Polymer Electrolyte toward 5 V High-Voltage Batteries. ACS Applied Materials & Interfaces. DOI: 10.1021/acsami.7b11342.
- Barshan Dev, Md Ashikur Rahman, Md. Reazuddin Repon, Mohammed M. Rahman, et al. (2023). Recent progress in thermal and acoustic properties of natural fiber reinforced polymer composites: Preparation, characterization, and data analysis. Polymer Composites. DOI: 10.1002/pc.27633.
- John F. Burd, J E Larson, Robert D. Wells (1975). Further studies on telestability in DNA. The synthesis and characterization of the duplex block polymers d(C20A10) - d(T10G20) and d(C20A15) - d(T15G20).. Journal of Biological Chemistry. DOI: 10.1016/s0021-9258(19)41149-6.
- Patrick J. M. Stals, Martijn A. J. Gillissen, Renaud Nicolaÿ, Anja R. A. Palmans, et al. (2013). The balance between intramolecular hydrogen bonding, polymer solubility and rigidity in single-chain polymeric nanoparticles. Polymer Chemistry. DOI: 10.1039/c3py00094j.
- Lian R. Hutchings, Jonathan M. Dodds, D. V. Rees, Solomon M. Kimani, et al. (2009). HyperMacs to HyperBlocks: A Novel Class of Branched Thermoplastic Elastomer. Macromolecules. DOI: 10.1021/ma901819f.
- A.L. Waly, A. M. Abdelghany, A.E. Tarabiah (2021). Study the structure of selenium modified polyethylene oxide/polyvinyl alcohol (PEO/PVA) polymer blend. Journal of Materials Research and Technology. DOI: 10.1016/j.jmrt.2021.08.078.
- Sunanda Sain, Dipa Ray, Anirudhha Mukhopadhyay, Suparna Sengupta, et al. (2012). Synthesis and characterization of PMMA‐cellulose nanocomposites by <i>in situ</i> polymerization technique. Journal of Applied Polymer Science. DOI: 10.1002/app.36723.
- J. B. Sajin, R. Christu Paul, Joseph Selvi Binoj, Bright Brailson Mansingh, et al. (2021). Impact of fiber length on mechanical, morphological and thermal analysis of chemical treated jute fiber polymer composites for sustainable applications. Current Research in Green and Sustainable Chemistry. DOI: 10.1016/j.crgsc.2021.100241.
- Fengjiao Zhang, Erfan Mohammadi, Xuyi Luo, Joseph Strzalka, et al. (2017). Critical Role of Surface Energy in Guiding Crystallization of Solution-Coated Conjugated Polymer Thin Films. Langmuir. DOI: 10.1021/acs.langmuir.7b02807.
- Yee Ling Yap, A. H. You, Lay Lian Teo, Hisham Hanapei (2013). Inorganic Filler Sizes Effect on Ionic Conductivity in Polyethylene Oxide (PEO) Composite Polymer Electrolyte. International Journal of Electrochemical Science. DOI: 10.1016/s1452-3981(23)14298-2.
- Mirna A. Mosiewicki, Mirta I. Aranguren, J. Borrajo (2005). Mechanical properties of linseed oil monoglyceride maleate/styrene copolymers. Journal of Applied Polymer Science. DOI: 10.1002/app.21790.
- Yaoyao Yang, Zhiyuan Liang, Rui Zhang, Shengwei Zhou, et al. (2024). Research Advances in Superabsorbent Polymers. Polymers. DOI: 10.3390/polym16040501.
- Alexandros K. Nikolaidis, Dimitris S. Achilias (2018). Thermal Degradation Kinetics and Viscoelastic Behavior of Poly(Methyl Methacrylate)/Organomodified Montmorillonite Nanocomposites Prepared via In Situ Bulk Radical Polymerization. Polymers. DOI: 10.3390/polym10050491.
- Ken Ichikawa, Takayuki Mori, Hiromi Kitano, Mitsuhiro Fukuda, et al. (2001). Fourier transform infrared study on the sorption of water to various kinds of polymer thin films. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.1191.
- Christopher S. Lovell, Adam J. Walker, Robin A. Damion, Asanah Radhi, et al. (2010). Influence of Cellulose on Ion Diffusivity in 1-Ethyl-3-Methyl-Imidazolium Acetate Cellulose Solutions. Biomacromolecules. DOI: 10.1021/bm1006807.
- Senem Kork, Görkem Yılmaz, Yusuf Yağcı (2015). Poly(vinyl alcohol)-Thioxanthone as One-Component Type II Photoinitiator for Free Radical Polymerization in Organic and Aqueous Media. Macromolecular Rapid Communications. DOI: 10.1002/marc.201500043.
- Kothandapani Babu, R. Dhamodharan (2008). Grafting of Poly(methyl methacrylate) Brushes from Magnetite Nanoparticles Using a Phosphonic Acid Based Initiator by Ambient Temperature Atom Transfer Radical Polymerization (ATATRP). Nanoscale Research Letters. DOI: 10.1007/s11671-008-9121-9.
- D. Feldman (2020). Poly(Vinyl Alcohol) Recent Contributions to Engineering and Medicine. Journal of Composites Science. DOI: 10.3390/jcs4040175.
- Ke Wang, Qibo Deng (2019). The Thermal and Mechanical Properties of Poly(ethylene-co-vinyl acetate) Random Copolymers (PEVA) and its Covalently Crosslinked Analogues (cPEVA). Polymers. DOI: 10.3390/polym11061055.
- Alejandra P. Lopez-Oliva, Nicholas J. Warren, Arthi D. Rajkumar, Oleksandr O. Mykhaylyk, et al. (2015). Polydimethylsiloxane-Based Diblock Copolymer Nano-objects Prepared in Nonpolar Media via RAFT-Mediated Polymerization-Induced Self-Assembly. Macromolecules. DOI: 10.1021/acs.macromol.5b00576.
- Stephen H. Donaldson, Saurabh Das, Matthew A. Gebbie, M. Rapp, et al. (2013). Asymmetric Electrostatic and Hydrophobic–Hydrophilic Interaction Forces between Mica Surfaces and Silicone Polymer Thin Films. ACS Nano. DOI: 10.1021/nn4050112.
- Markus Scholl, Tuan Q. Nguyen, Bernd Bruchmann, Harm‐Anton Klok (2007). The thermal polymerization of amino acids revisited; Synthesis and structural characterization of hyperbranched polymers from <scp>L</scp>‐lysine. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.22295.
- Luis Marcelo Lozano, Isabel Bagudanch, Alan O. Sustaita, Jackeline Iturbe-Ek, et al. (2018). Single-Point Incremental Forming of Two Biocompatible Polymers: An Insight into Their Thermal and Structural Properties. Polymers. DOI: 10.3390/polym10040391.
- Thibault Parpaite, Belkacem Otazaghine, A. S. Caro‐Bretelle, Aurélie Taguet, et al. (2016). Janus hybrid silica/polymer nanoparticles as effective compatibilizing agents for polystyrene/polyamide-6 melted blends. Polymer. DOI: 10.1016/j.polymer.2016.02.044.
- Sandra Binauld, Laura Delafresnaye, Bernadette Charleux, Franck D’Agosto, et al. (2014). Emulsion Polymerization of Vinyl Acetate in the Presence of Different Hydrophilic Polymers Obtained by RAFT/MADIX. Macromolecules. DOI: 10.1021/ma402549x.
- Xiao Ya Yuan, L. L. Zou, Cai-Lian Liao, Jing Dai (2012). Improved properties of chemically modified graphene/poly(methyl methacrylate) nanocomposites via a facile in-situ bulk polymerization. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2012.90.
- Rramaswamy Ravikumar, Mani Ganesh, U. Ubaidulla, Eun Young Choi, et al. (2017). Preparation, characterization, and in vitro diffusion study of nonwoven electrospun nanofiber of curcumin-loaded cellulose acetate phthalate polymer. Saudi Pharmaceutical Journal. DOI: 10.1016/j.jsps.2017.02.004.
- Benoît H. Lessard, Milan Marić (2009). One-Step Poly(styrene-<i>alt</i>-maleic anhydride)-<i>block</i>-poly(styrene) Copolymers with Highly Alternating Styrene/Maleic Anhydride Sequences Are Possible by Nitroxide-Mediated Polymerization. Macromolecules. DOI: 10.1021/ma902234t.
- Ione Cendoya, Daniel López, Ángel Alegría, Carmen Mijangos (2001). Dynamic mechanical and dielectrical properties of poly(vinyl alcohol) and poly(vinyl alcohol)‐based nanocomposites. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.1172.
- Sunting Xuan, Sudipta Gupta, Xin Li, Markus Bleuel, et al. (2017). Synthesis and Characterization of Well-Defined PEGylated Polypeptoids as Protein-Resistant Polymers. Biomacromolecules. DOI: 10.1021/acs.biomac.6b01824.
- Sara Aid, Anissa Eddhahak, Zaida Ortega, Daniel Frœlich, et al. (2017). Experimental study of the miscibility of ABS/PC polymer blends and investigation of the processing effect. Journal of Applied Polymer Science. DOI: 10.1002/app.44975.
- Pairote Klinpituksa, Patchareeya Kosaiyakanon (2017). Superabsorbent Polymer Based on Sodium Carboxymethyl Cellulose Grafted Polyacrylic Acid by Inverse Suspension Polymerization. International Journal of Polymer Science. DOI: 10.1155/2017/3476921.
- Nurul Nadiah Sa’adun, S. Ramesh, Ramesh Kasi (2014). Development and Characterization of Poly(1-vinylpyrrolidone-co-vinyl acetate) Copolymer Based Polymer Electrolytes. The Scientific World JOURNAL. DOI: 10.1155/2014/254215.
- Atul Kumar Maurya, Felipe M. de Souza, Tim Dawsey, Ram K. Gupta (2023). Biodegradable polymers and composites: Recent development and challenges. Polymer Composites. DOI: 10.1002/pc.28023.
- Kuiri F. Tjipangandjara, P. Somasundaran (1991). Effects of changes in adsorbed polyacrylic acid conformation on alumina flocculation. Colloids and Surfaces. DOI: 10.1016/0166-6622(91)80096-7.
- Senbin Chen, Arthur Bertrand, Xijun Chang, Pierre Alcouffe, et al. (2010). Heterocomplementary H-Bonding RAFT Agents as Tools for the Preparation of Supramolecular Miktoarm Star Copolymers. Macromolecules. DOI: 10.1021/ma101044y.
- M. Bahal, Navneet Kaur, Nidhi Sharotri, Dhiraj Sud (2019). Investigations on Amphoteric Chitosan/TiO<sub>2</sub> Bionanocomposites for Application in Visible Light Induced Photocatalytic Degradation. Advances in Polymer Technology. DOI: 10.1155/2019/2345631.
- Bernd Tieke, G. Chapuis (1984). Solid‐state polymerization of butadienes. Crystal structure and solution properties of a stereoregular amphoteric 1,4‐<i>trans</i>‐polybutadiene. Journal of Polymer Science Polymer Chemistry Edition. DOI: 10.1002/pol.1984.170221114.
- Iftekharul Islam, Shahin Sultana, Swapan Kumer Ray, Husna Parvin Nur, et al. (2018). Electrical and Tensile Properties of Carbon Black Reinforced Polyvinyl Chloride Conductive Composites. C – Journal of Carbon Research. DOI: 10.3390/c4010015.
- Ryo Tamaki, Yoshiki Chujo (1998). Synthesis of poly(vinyl alcohol) / silica gel polymer hybrids by in-situ hydrolysis method. Applied Organometallic Chemistry. DOI: 10.1002/(sici)1099-0739(199810/11)12:10/11<755::aid-aoc783>3.0.co;2-a.
- Sung Chul Hong, Tadeusz Pakuła, Krzysztof Matyjaszewski (2001). Preparation of Polyisobutene-graft-Poly(methyl methacrylate) and Polyisobutene-graft-Polystyrene with Different Compositions and Side Chain Architectures through Atom Transfer Radical Polymerization (ATRP). Macromolecular Chemistry and Physics. DOI: 10.1002/1521-3935(20011101)202:17<3392::aid-macp3392>3.0.co;2-4.
- Charu Agarwal, Zsófia Kóczán, Zoltán Börcsök, Katalin Halász, et al. (2021). Valorization of Larix decidua Mill. bark by functionalizing bioextract onto chitosan films for sustainable active food packaging. Carbohydrate Polymers. DOI: 10.1016/j.carbpol.2021.118409.
- Ahmad Alsaad, Ahmad A. Ahmad, I. A. Qattan, Abdul-Raouf El-Ali, et al. (2021). Synthesis of Optically Tunable and Thermally Stable PMMA–PVA/CuO NPs Hybrid Nanocomposite Thin Films. Polymers. DOI: 10.3390/polym13111715.
- Joana Filipa Parente, Vânia Isabel Sousa, Juliana Marques, Marta Adriana Forte, et al. (2022). Biodegradable Polymers for Microencapsulation Systems. Advances in Polymer Technology. DOI: 10.1155/2022/4640379.
- Sema Ekici, Dursun Saraydın (2007). Interpenetrating polymeric network hydrogels for potential gastrointestinal drug release. Polymer International. DOI: 10.1002/pi.2271.
- Alexander M. Mannion, Frank S. Bates, Christopher W. Macosko (2016). Synthesis and Rheology of Branched Multiblock Polymers Based on Polylactide. Macromolecules. DOI: 10.1021/acs.macromol.6b00792.
- Igor Kolesov, Oleksandr Dolynchuk, H.‐J. Radusch (2015). Shape-memory behavior of cross-linked semi-crystalline polymers and their blends. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2015.24.
- Kevin M. Burridge, Benjamin D. Harding, Indra D. Sahu, Madison M. Kearns, et al. (2020). Simple Derivatization of RAFT-Synthesized Styrene–Maleic Anhydride Copolymers for Lipid Disk Formulations. Biomacromolecules. DOI: 10.1021/acs.biomac.0c00041.
- Elżbieta Czarnecka, Jacek Nowaczyk (2021). Synthesis and Characterization Superabsorbent Polymers Made of Starch, Acrylic Acid, Acrylamide, Poly(Vinyl Alcohol), 2-Hydroxyethyl Methacrylate, 2-Acrylamido-2-methylpropane Sulfonic Acid. International Journal of Molecular Sciences. DOI: 10.3390/ijms22094325.
- Guillaume G. Hedir, Maria C. Arno, Marvin Langlais, Jonathan T. Husband, et al. (2017). Poly(oligo(ethylene glycol) vinyl acetate)s: A Versatile Class of Thermoresponsive and Biocompatible Polymers. Angewandte Chemie International Edition. DOI: 10.1002/anie.201703763.
- Ping Wang, Yin‐Ning Zhou, Jiangshui Luo, Zheng‐Hong Luo (2013). Poly(ionic liquid)s-based nanocomposite polyelectrolytes with tunable ionic conductivity prepared via SI-ATRP. Polymer Chemistry. DOI: 10.1039/c3py01025b.
- Moonis Ali Khan, Ramendhirran Govindasamy, Akil Ahmad, Masoom Raza Siddiqui, et al. (2021). Carbon Based Polymeric Nanocomposites for Dye Adsorption: Synthesis, Characterization, and Application. Polymers. DOI: 10.3390/polym13030419.
- Claudia Friedsam, Aránzazu Del Campo Bécares, Ulrich Jonas, Markus Seitz, et al. (2004). Adsorption of polyacrylic acid on self-assembled monolayers investigated by single-molecule force spectroscopy. New Journal of Physics. DOI: 10.1088/1367-2630/6/1/009.
- Anke Ziegler, Katharina Landfester, Anna Musyanovych (2009). Synthesis of phosphonate-functionalized polystyrene and poly(methyl methacrylate) particles and their kinetic behavior in miniemulsion polymerization. Colloid & Polymer Science. DOI: 10.1007/s00396-009-2087-z.
- Phumile Sikiti, Titus A.M. Msagati, Bhekie B. Mamba, Ajay Kumar Mishra (2014). Synthesis and characterization of molecularly imprinted polymers for the remediation of PCBs and dioxins in aqueous environments. Journal of Environmental Health Science and Engineering. DOI: 10.1186/2052-336x-12-82.
- Antoine Debuigne, Rinaldo Poli, Julien De Winter, Pascal Laurent, et al. (2010). Effective Cobalt-Mediated Radical Coupling (CMRC) of Poly(vinyl acetate) and Poly(<i>N</i>-vinylpyrrolidone) (Co)polymer Precursors. Macromolecules. DOI: 10.1021/ma902610m.
- Ruma Maji, Somasree Ray, B. Krishna Das, Amit Kumar Nayak (2012). Ethyl Cellulose Microparticles Containing Metformin HCl by Emulsification-Solvent Evaporation Technique: Effect of Formulation Variables. ISRN Polymer Science. DOI: 10.5402/2012/801827.
- Nathaniel Z. Hardin, Thirupathi Ravula, Giacomo M. Di Mauro, Ayyalusamy Ramamoorthy (2019). Hydrophobic Functionalization of Polyacrylic Acid as a Versatile Platform for the Development of Polymer Lipid Nanodisks. Small. DOI: 10.1002/smll.201804813.
- Qinghua Xia, Xuejuan Zhao, Shijian Chen, W. Z., et al. (2010). Effect of solution-blended poly(styrene-co-acrylonitrile) copolymer on crystallization of poly(vinylidene fluoride). eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2010.36.
- Muhammad Shahid Latif, Abul Kalam Azad, Asif Nawaz, Sheikh Abdur Rashid, et al. (2021). Ethyl Cellulose and Hydroxypropyl Methyl Cellulose Blended Methotrexate-Loaded Transdermal Patches: In Vitro and Ex Vivo. Polymers. DOI: 10.3390/polym13203455.
- David Kalaš, Karel Šíma, Petr Kadlec, Radek Polanský, et al. (2021). FFF 3D Printing in Electronic Applications: Dielectric and Thermal Properties of Selected Polymers. Polymers. DOI: 10.3390/polym13213702.
- Khamael M. Abualnaja, Ahmed E. Alprol, M.A. Abu-Saied, Abdallah Tageldein Mansour, et al. (2021). Studying the Adsorptive Behavior of Poly(Acrylonitrile-co-Styrene) and Carbon Nanotubes (Nanocomposites) Impregnated with Adsorbent Materials towards Methyl Orange Dye. Nanomaterials. DOI: 10.3390/nano11051144.
- Jin Zhang, Qipeng Guo, Bronwyn Fox (2010). Thermal and mechanical properties of a dendritic hydroxyl‐functional hyperbranched polymer and tetrafunctional epoxy resin blends. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.21902.
- Jinfang Wang, Peter A. G. Cormack, David C. Sherrington, Ezat Khoshdel (2007). Synthesis and characterization of micrometer-sized molecularly imprinted spherical polymer particulates prepared via precipitation polymerization. Pure and Applied Chemistry. DOI: 10.1351/pac200779091505.
- José Luis Aparicio-Collado, Juan José Novoa, José Molina‐Mateo, Constantino Torregrosa Cabanilles, et al. (2020). Novel Semi-Interpenetrated Polymer Networks of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/Poly (Vinyl Alcohol) with Incorporated Conductive Polypyrrole Nanoparticles. Polymers. DOI: 10.3390/polym13010057.
- Shyh-Dar Lee, Ging‐Ho Hsiue, Chen‐Yu Kao (1996). Preparation and characterization of a homobifunctional silicone rubber membrane grafted with acrylic acid via plasma-induced graft copolymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/(sici)1099-0518(19960115)34:1<141::aid-pola15>3.0.co;2-l.
- Etienne Girard, Thierry Tassaing, Séverine Camy, Jean‐Stéphane Condoret, et al. (2012). Enhancement of Poly(vinyl ester) Solubility in Supercritical CO<sub>2</sub> by Partial Fluorination: The Key Role of Polymer–Polymer Interactions. Journal of the American Chemical Society. DOI: 10.1021/ja304585d.
- Nikos D. Koromilas, Charalampos Anastasopoulos, Evdokia K. Oikonomou, Joannis K. Kallitsis (2019). Preparation of Porous Polymeric Membranes Based on a Pyridine Containing Aromatic Polyether Sulfone. Polymers. DOI: 10.3390/polym11010059.
- Mariana Chelu, Mónica Popa, Emma Adriana Ozon, Jeanina Pandele Cusu, et al. (2023). High-Content Aloe vera Based Hydrogels: Physicochemical and Pharmaceutical Properties. Polymers. DOI: 10.3390/polym15051312.
- Ahmed A. H. Abdellatif, Mansour Alsharidah, Osamah Al Rugaie, Hesham M. Tawfeek, et al. (2021). Silver Nanoparticle-Coated Ethyl Cellulose Inhibits Tumor Necrosis Factor-α of Breast Cancer Cells. Drug Design Development and Therapy. DOI: 10.2147/dddt.s310760.
- Carla Vilela, Ana P. C. Martins, N. Sousa, Armando J. D. Silvestre, et al. (2018). Poly(bis[2-(methacryloyloxy)ethyl] phosphate)/Bacterial Cellulose Nanocomposites: Preparation, Characterization and Application as Polymer Electrolyte Membranes. Applied Sciences. DOI: 10.3390/app8071145.
- Ritesh N. Vyas, Bin Wang (2010). Electrochemical Analysis of Conducting Polymer Thin Films. International Journal of Molecular Sciences. DOI: 10.3390/ijms11041956.
- Bo Lü, Khalid Lamnawar, Abderrahim Maazouz, Guillaume Sudre (2018). Critical Role of Interfacial Diffusion and Diffuse Interphases Formed in Multi-Micro-/Nanolayered Polymer Films Based on Poly(vinylidene fluoride) and Poly(methyl methacrylate). ACS Applied Materials & Interfaces. DOI: 10.1021/acsami.8b09064.
- W. H. Zhang, Xuemei Fan, Weiliang Tian, Wusheng Fan (2012). Polystyrene/nano-SiO2 composite microspheres fabricated by Pickering emulsion polymerization: Preparation, mechanisms and thermal properties. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2012.57.
- Kyung‐Youl Baek, Masami Kamigaito, Mitsuo Sawamoto (2002). Star poly(methyl methacrylate) with end‐functionalized arm chains by ruthenium‐catalyzed living radical polymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.10279.
- Serena Gazzo, Giovanni Manfredi, Robert Pötzsch, Qiang Wei, et al. (2015). High refractive index hyperbranched polyvinylsulfides for planar one‐dimensional all‐polymer photonic crystals. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.23932.
- Even Lemieux, Robert E. Prud’homme, R. Forte, Robert Jérôme, et al. (1988). Influence of the tacticity of poly(methyl methacrylate) on its miscibility with chlorinated polymers. Macromolecules. DOI: 10.1021/ma00185a046.
- R. Geethanjali, A. Ali Fathima Sabirneeza, S. Subhashini (2014). Water-Soluble and Biodegradable Pectin-Grafted Polyacrylamide and Pectin-Grafted Polyacrylic Acid: Electrochemical Investigation of Corrosion-Inhibition Behaviour on Mild Steel in 3.5% NaCl Media. Indian Journal of Materials Science. DOI: 10.1155/2014/356075.
- Yu Zhang, Yin-yan Chen, Li Huang, Zhiguo Chai, et al. (2017). The antifungal effects and mechanical properties of silver bromide/cationic polymer nano-composite-modified Poly-methyl methacrylate-based dental resin. Scientific Reports. DOI: 10.1038/s41598-017-01686-4.
- Merhawi Abreha Gebreyesus, Y. Purushotham, J. Siva Kumar (2016). Preparation and characterization of lithium ion conducting polymer electrolytes based on a blend of poly(vinylidene fluoride-co-hexafluoropropylene) and poly(methyl methacrylate). Heliyon. DOI: 10.1016/j.heliyon.2016.e00134.
- Vikas Dash (2010). Release Kinetic Studies of Aspirin Microcapsules from Ethyl Cellulose, Cellulose Acetate Phthalate and their Mixtures by Emulsion Solvent Evaporation Method. Scientia Pharmaceutica. DOI: 10.3797/scipharm.0908-09.
- Abdallah S. Elgharbawy, Abdel-Ghaffar M. El Demerdash, Wagih A. Sadik, Mosaad A. Kasaby, et al. (2024). Enhancing the Biodegradability, Water Solubility, and Thermal Properties of Polyvinyl Alcohol through Natural Polymer Blending: An Approach toward Sustainable Polymer Applications. Polymers. DOI: 10.3390/polym16152141.
- Tianying Jiang, Charles F. Zukoski (2012). Role of Particle Size and Polymer Length in Rheology of Colloid–Polymer Composites. Macromolecules. DOI: 10.1021/ma301184t.
- Roland Faller, Florian Müller‐Plathe, Manolis Doxastakis, Doros N. Theodorou (2001). Local Structure and Dynamics of <i>trans</i>-Polyisoprene Oligomers. Macromolecules. DOI: 10.1021/ma0016782.
- Robin Petit, Jin Li, Babs Van de Voorde, Sandra Van Vlierberghe, et al. (2021). Atomic Layer Deposition on Polymer Thin Films: On the Role of Precursor Infiltration and Reactivity. ACS Applied Materials & Interfaces. DOI: 10.1021/acsami.1c12933.
- Weiyu Wang, Ralf Schlegel, B. Tyler White, Katherine Grace Williams, et al. (2016). High Temperature Thermoplastic Elastomers Synthesized by Living Anionic Polymerization in Hydrocarbon Solvent at Room Temperature. Macromolecules. DOI: 10.1021/acs.macromol.5b02642.
- Kgabo Phillemon Matabola, A. R. de Vries, A. S. Luyt, Ravi Kumar (2011). Studies on single polymer composites of poly(methyl methacrylate) reinforced with electrospun nanofibers with a focus on their dynamic mechanical properties. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2011.61.
- María J. Galante, J. Borrajo, Roberto J. J. Williams, E. Girard-Reydet, et al. (2001). Double Phase Separation Induced by Polymerization in Ternary Blends of Epoxies with Polystyrene and Poly(methyl methacrylate). Macromolecules. DOI: 10.1021/ma000429a.
- Mohamad A. Brza, Shujahadeen B. Aziz, Hazleen Anuar, Fathilah Ali, et al. (2020). Metal framework as a novel approach for the fabrication of electric double layer capacitor device with high energy density using plasticized Poly(vinyl alcohol): Ammonium thiocyanate based polymer electrolyte. Arabian Journal of Chemistry. DOI: 10.1016/j.arabjc.2020.08.006.
- Bashir Abubakar Abdulkadir, John Ojur Dennis, Yas Al‐Hadeethi, Muhammad Fadhlullah Bin Abd. Shukur, et al. (2020). Optimization of the Electrochemical Performance of a Composite Polymer Electrolyte Based on PVA-K2CO3-SiO2 Composite. Polymers. DOI: 10.3390/polym13010092.
- Suman Basak, Harshvardhan Ajay Khare, Martin Roursgaard, Paul J. Kempen, et al. (2020). Simultaneous Cross-Linking and Cross-Polymerization of Enzyme Responsive Polyethylene Glycol Nanogels in Confined Aqueous Droplets for Reduction of Low-Density Lipoprotein Oxidation. Biomacromolecules. DOI: 10.1021/acs.biomac.0c01238.
- Ni Huo, Wyatt E. Tenhaeff (2023). High Refractive Index Polymer Thin Films by Charge-Transfer Complexation. Macromolecules. DOI: 10.1021/acs.macromol.2c02532.
- Chamil Abeykoon, Paula Pérez, Adrian Kelly (2020). The effect of materials' rheology on process energy consumption and melt thermal quality in polymer extrusion. Polymer Engineering and Science. DOI: 10.1002/pen.25377.
- Hironobu Watanabe, Masami Kamigaito (2023). Direct Radical Copolymerizations of Thioamides To Generate Vinyl Polymers with Degradable Thioether Bonds in the Backbones. Journal of the American Chemical Society. DOI: 10.1021/jacs.3c01796.
- Farhang Abbasi, Hamid Mirzadeh, Ali Asghar Katbab (2002). Sequential interpenetrating polymer networks of poly(2‐hydroxyethyl methacrylate) and polydimethylsiloxane. Journal of Applied Polymer Science. DOI: 10.1002/app.10609.
- Oleksandr O. Mykhaylyk, Christine M. Fernyhough, Masayuki Okura, J. Patrick A. Fairclough, et al. (2010). Monodisperse macromolecules – A stepping stone to understanding industrial polymers. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2010.09.021.
- Rawdah Whba, L. TianKhoon, Mohd Sukor Su’ait, M. Y. A. Rahman, et al. (2018). Influence of binary lithium salts on 49% poly(methyl methacrylate) grafted natural rubber based solid polymer electrolytes. Arabian Journal of Chemistry. DOI: 10.1016/j.arabjc.2018.11.009.
- Li Yang, Hao Guo (2020). Crosslinked poly(methyl methacrylate) with perfluorocyclobutyl aryl ether moiety as crosslinking unit: thermally stable polymer with high glass transition temperature. RSC Advances. DOI: 10.1039/c9ra10166g.
- P. Balaji Bhargav, Varishetty Madhu Mohan, A. K. Sharma, V. V. R. Narasimha Rao (2008). Characterization of poly(vinyl alcohol)/sodium bromide polymer electrolytes for electrochemical cell applications. Journal of Applied Polymer Science. DOI: 10.1002/app.27566.
- AnilK Gujjari, VishrutM Bhatnagar, Ravi Maraballi Basavaraju (2013). Color stability and flexural strength of poly (methyl methacrylate) and bis-acrylic composite based provisional crown and bridge auto-polymerizing resins exposed to beverages and food dye: An in vitro study. Indian Journal of Dental Research. DOI: 10.4103/0970-9290.116672.
- Laila M. Al-Harbi, Samia A. Kosa, Musa Kaleem Baloch, Qaisar Abbas Bhatti, et al. (2016). Adsorption of Polyvinylpyrrolidone over the Silica Surface: As Affected by Pretreatment of Adsorbent and Molar Mass of Polymer Adsorbate. International Journal of Polymer Science. DOI: 10.1155/2016/2417292.
- Vincent Monteil, Amaia Bastero, Stefan Mecking (2005). 1,2-Polybutadiene Latices by Catalytic Polymerization in Aqueous Emulsion. Macromolecules. DOI: 10.1021/ma050621i.
- Kexin Qu, Jing Ma, Hua Zhang, Xuanjun Li (2024). Characterization of construction and physical properties of composite oleogel based on single low molecular weight wax and polymer ethyl cellulose. LWT. DOI: 10.1016/j.lwt.2024.115722.
- Shefali Mishra, R. Bajpai, R. Katare, A. K. Bajpai (2007). Radiation induced crosslinking effect on semi - interpenetrating polymer networks of poly(vinyl alcohol). eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2007.58.
- FAMIZA ABDUL LATIF, Nabilah Akemal Muhd Zailani, Zeyana Saif Mubarak Al Shukaili, Sharil Fadli Mohamad Zamri, et al. (2021). Review of poly (methyl methacrylate) based polymer electrolytes in solid-state supercapacitors. International Journal of Electrochemical Science. DOI: 10.20964/2022.01.44.
- Seigo Watanabe, Kenichi Oyaizu (2023). Designing Strategy for High Refractive Index Polymers: From the Molecular Level to Bulk Structure Control. Bulletin of the Chemical Society of Japan. DOI: 10.1246/bcsj.20230177.
- K. Dedecker, G. Groeninckx (1999). Reactive compatibilization of the polyamide 6/poly(phenylene oxide) blend by means of styrene-maleic anhydride copolymer. Journal of Applied Polymer Science. DOI: 10.1002/(sici)1097-4628(19990808)73:6<889::aid-app5>3.0.co;2-s.
- Mineto Uchiyama, Kotaro Satoh, Masami Kamigaito (2021). Stereospecific cationic RAFT polymerization of bulky vinyl ethers and stereoblock poly(vinyl alcohol) via mechanistic transformation to radical RAFT polymerization of vinyl acetate. Giant. DOI: 10.1016/j.giant.2021.100047.
- Chaiwat Norakankorn, Qinmin Pan, Garry L. Rempel, Suda Kiatkamjornwong (2007). Synthesis of Poly(methyl methacrylate) Nanoparticles Initiated by 2,2′‐Azoisobutyronitrile via Differential Microemulsion Polymerization. Macromolecular Rapid Communications. DOI: 10.1002/marc.200700035.
- Jinhui Pang, Xin Liu, Jun Yang, Fachuang Lu, et al. (2016). Synthesis of Highly Polymerized Water-soluble Cellulose Acetate by the Side Reaction in Carboxylate Ionic Liquid 1-ethyl-3-methylimidazolium Acetate. Scientific Reports. DOI: 10.1038/srep33725.
- Abdullah Ahmed Ali Ahmed, Abdullah M. Al-Hussam, A.M. Abdulwahab, Ahmed Nasser Ahmed Ali Ahmed (2018). The impact of sodium chloride as dopant on optical and electrical properties of polyvinyl alcohol. AIMS Materials Science. DOI: 10.3934/matersci.2018.3.533.
- Ksenia V. Otvagina, А. Е. Мочалова, Tatyana S. Sazanova, Anton N. Petukhov, et al. (2016). Preparation and Characterization of Facilitated Transport Membranes Composed of Chitosan-Styrene and Chitosan-Acrylonitrile Copolymers Modified by Methylimidazolium Based Ionic Liquids for CO2 Separation from CH4 and N2. Membranes. DOI: 10.3390/membranes6020031.
- Xinde Tang, Longcheng Gao, Xinghe Fan, Qifeng Zhou (2007). ABA‐type amphiphilic triblock copolymers containing <i>p</i>‐ethoxy azobenzene via atom transfer radical polymerization: Synthesis, characterization, and properties. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.21989.
- L. Zhang, Kam Chiu Tam, L. H. Gan, C. Y. Yue, et al. (2002). Effect of nano‐silica filler on the rheological and morphological properties of polypropylene/liquid‐crystalline polymer blends. Journal of Applied Polymer Science. DOI: 10.1002/app.11513.
- Shotaro Ito, Raita Goseki, Takashi Ishizone, Akira Hirao (2013). Successive synthesis of well-defined multiarmed miktoarm star polymers by iterative methodology using living anionic polymerization. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2013.05.014.
- Yogita P. Mahant, Subhash B. Kondawar, Deoram V. Nandanwar, Pankaj Koinkar (2018). Poly(methyl methacrylate) reinforced poly(vinylidene fluoride) composites electrospun nanofibrous polymer electrolytes as potential separator for lithium ion batteries. Materials for Renewable and Sustainable Energy. DOI: 10.1007/s40243-018-0115-y.
- Qiwen Yong, Caizhen Liang (2019). Synthesis of an Aqueous Self-Matting Acrylic Resin with Low Gloss and High Transparency via Controlling Surface Morphology. Polymers. DOI: 10.3390/polym11020322.
- Johannes S. Kanger, Cees Otto, M. Slotboom, Jan Greve (1996). Waveguide Raman Spectroscopy of Thin Polymer Layers and Monolayers of Biomolecules Using High Refractive Index Waveguides. The Journal of Physical Chemistry. DOI: 10.1021/jp952566t.
- Alejandro Sosnik, Ronya Ben Shabo, Hen Moshe Halamish (2021). Cannabidiol-Loaded Mixed Polymeric Micelles of Chitosan/Poly(Vinyl Alcohol) and Poly(Methyl Methacrylate) for Trans-Corneal Delivery. Pharmaceutics. DOI: 10.3390/pharmaceutics13122142.
- Olga Kuzmina, Thomas Heinze, Dariusz Wawro (2012). Blending of Cellulose and Chitosan in Alkyl Imidazolium Ionic Liquids. ISRN Polymer Science. DOI: 10.5402/2012/251950.
- Wei Lu, Caili Huang, Kunlun Hong, Nam‐Goo Kang, et al. (2016). Poly(1-adamantyl acrylate): Living Anionic Polymerization, Block Copolymerization, and Thermal Properties. Macromolecules. DOI: 10.1021/acs.macromol.6b01732.
- Thomas R. Congdon, Bethany T. Dean, James Kasperczak-Wright, Caroline I. Biggs, et al. (2015). Probing the Biomimetic Ice Nucleation Inhibition Activity of Poly(vinyl alcohol) and Comparison to Synthetic and Biological Polymers. Biomacromolecules. DOI: 10.1021/acs.biomac.5b00774.
- Ghanshyam S. Chauhan, Lalit K. Guleria, Β. N. Misra, Inderjeet Kaur (1999). Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene-alt-maleic anhydride) onto cellulose extracted from pine needles. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/(sici)1099-0518(19990615)37:12<1763::aid-pola5>3.0.co;2-s.
- Guillaume Moreira, Elisabetta Fedeli, Fabio Ziarelli, Donatella Capitani, et al. (2015). Synthesis of polystyrene-grafted cellulose acetate copolymers via nitroxide-mediated polymerization. Polymer Chemistry. DOI: 10.1039/c5py00752f.
- Miriam Truffa Giachet, Michael Schilling, Kristen McCormick, Joy Mazurek, et al. (2014). Assessment of the composition and condition of animation cels made from cellulose acetate. Polymer Degradation and Stability. DOI: 10.1016/j.polymdegradstab.2014.03.009.
- John H. O’Haver, Jeffrey H. Harwell, Larry R. Evans, Walter H. Waddell (1996). Polar copolymer-surface-modified precipitated silica. Journal of Applied Polymer Science. DOI: 10.1002/(sici)1097-4628(19960228)59:9<1427::aid-app10>3.0.co;2-w.
- Fernanda Oliveira Vieira da Cunha, Diogo Henrique Roesler Melo, Vinicius Bassanesi Veronese, Maria M.C. Forte (2004). Study of castor oil polyurethane - poly(methyl methacrylate) semi-interpenetrating polymer network (SIPN) reaction parameters using a 2³ factorial experimental design. Materials Research. DOI: 10.1590/s1516-14392004000400006.
- Jeremy D. Moskowitz, Brooks A. Abel, Charles L. McCormick, Jeffrey S. Wiggins (2015). High molecular weight and low dispersity polyacrylonitrile by low temperature RAFT polymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.27806.
- José de la Fuente, Marina Fernández‐Sanz, Marta Fernández‐García, Enrique López Madruga (2001). Solvent Effects on the Synthesis of Poly(methyl methacrylate) by Atom-Transfer Radical Polymerization (ATRP). Macromolecular Chemistry and Physics. DOI: 10.1002/1521-3935(20010801)202:12<2565::aid-macp2565>3.0.co;2-4.
- Waleed K. El‐Zawawy, Maha M. Ibrahim (2011). Preparation and characterization of novel polymer hydrogel from industrial waste and copolymerization of poly(vinyl alcohol) and polyacrylamide. Journal of Applied Polymer Science. DOI: 10.1002/app.35481.
- Deborah A. Barkley, Naisheng Jiang, Mani Sen, Maya K. Endoh, et al. (2017). Chain Conformation near the Buried Interface in Nanoparticle-Stabilized Polymer Thin Films. Macromolecules. DOI: 10.1021/acs.macromol.7b01187.
- Shubham Sharma, P. Sudhakara, Jujhar Singh, Sanjay Mavinkere Rangappa, et al. (2023). Fabrication of Novel Polymer Composites from Leather Waste Fibers and Recycled Poly(Ethylene-Vinyl-Acetate) for Value-Added Products. Sustainability. DOI: 10.3390/su15054333.
- Selva Çavuş, Ebru Durgun (2016). Poly(vinyl alcohol) Based Polymer Gel Electrolytes: Investigation on Their Conductivity and Characterization. Acta Physica Polonica A. DOI: 10.12693/aphyspola.129.621.
- Susilawati Susilawati (2009). Dose Response and Optical Properties of Dyed Poly Vinyl Alcohol-Trichloroacetic Acid Polymeric Blends Irradiated with Gamma-Rays. American Journal of Applied Sciences. DOI: 10.3844/ajassp.2009.2071.2077.
- Giulia Panusa, Ye Pu, Jieping Wang, Christophe Moser, et al. (2020). Fabrication of Sub-Micron Polymer Waveguides through Two-Photon Polymerization in Polydimethylsiloxane. Polymers. DOI: 10.3390/polym12112485.
- Ralf Seemann, Karin Jacobs, Katharina Landfester, Stephan Herminghaus (2006). Freezing of polymer thin films and surfaces: The small molecular weight puzzle. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.20920.
- Luuk L. C. Olijve, Marco M. R. M. Hendrix, Ilja K. Voets (2016). Influence of Polymer Chain Architecture of Poly(vinyl alcohol) on the Inhibition of Ice Recrystallization. Macromolecular Chemistry and Physics. DOI: 10.1002/macp.201500497.
- Mustafa Kamal, E.M. Abdelrazek, N.M. Sellow, A. M. Abdelghany (2018). Synthesis and optimization of Novel Chitosan/Cellulose Acetate Natural Polymer Membrane for water treatment. JOURNAL OF ADVANCES IN PHYSICS. DOI: 10.24297/jap.v14i1.7183.
- Gamze Tan, Karsten Kantner, Qian Zhang, Mahmoud G. Soliman, et al. (2015). Conjugation of Polymer-Coated Gold Nanoparticles with Antibodies—Synthesis and Characterization. Nanomaterials. DOI: 10.3390/nano5031297.
- Jacobo Aguilar, M. Rabelero, S. M. Nuño‐Donlucas, E. Mendizábal, et al. (2010). Narrow size‐distribution poly(methyl methacrylate) nanoparticles made by semicontinuous heterophase polymerization. Journal of Applied Polymer Science. DOI: 10.1002/app.32886.
- K. Sasipriya, R. Suriyaprabha, P. Prabu, V. Rajendran (2013). Synthesis and characterisation of polymeric nanofibers poly (vinyl alcohol) and poly (vinyl alcohol)/silica using indigenous electrospinning set up. Materials Research. DOI: 10.1590/s1516-14392013005000050.
- Alhulw H. Alshammari (2024). Structural, Optical, and Thermal Properties of PVA/SrTiO3/CNT Polymer Nanocomposites. Polymers. DOI: 10.3390/polym16101392.
- Matthias Bruch, Dietmar M�der, Florian M. Bauers, Ton Loontjens, et al. (2000). Melt modification of poly(styrene-co-maleic anhydride) with alcohols in the presence of 1,3-oxazolines. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/(sici)1099-0518(20000415)38:8<1222::aid-pola5>3.0.co;2-z.
- Anna Liguori, Enrico Traldi, Elena Toccaceli, Romolo Laurita, et al. (2015). Co‐Deposition of Plasma‐Polymerized Polyacrylic Acid and Silver Nanoparticles for the Production of Nanocomposite Coatings Using a Non‐Equilibrium Atmospheric Pressure Plasma Jet. Plasma Processes and Polymers. DOI: 10.1002/ppap.201500143.
- N. M. J. Rasali, M.A. Saadiah, N. K. Zainuddin, Yasutaka Nagao, et al. (2020). Ionic transport studies of solid bio-polymer electrolytes based on carboxymethyl cellulose doped with ammonium acetate and its potential application as an electrical double layer capacitor. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2020.51.
- Natalia Casís, Diana A. Estenoz, Luis M. Gugliotta, Haydée Oliva, et al. (2006). Heterogeneous bulk polymerization of styrene in the presence of polybutadiene: Calculation of the macromolecular structure. Journal of Applied Polymer Science. DOI: 10.1002/app.22902.
- Arnaud W. Laramée, Catherine Lanthier, Christian Pellerin (2020). Electrospinning of Highly Crystalline Polymers for Strongly Oriented Fibers. ACS Applied Polymer Materials. DOI: 10.1021/acsapm.0c00873.
- Matthias Edler, Stefan Mayrbrugger, Alexander Fian, Gregor Trimmel, et al. (2013). Wavelength selective refractive index modulation in a ROMP derived polymer bearing phenyl- and ortho-nitrobenzyl ester groups. Journal of Materials Chemistry C. DOI: 10.1039/c3tc00006k.
- Pravin Kadam, S. T. Mhaske (2011). Synthesis of Star-Shaped Polymers. Designed Monomers & Polymers. DOI: 10.1163/156855511x598614.
- Zhiya Ma, Yueping Guan, Xianqiao Liu, Huizhou Liu (2005). Covalent immobilization of albumin on micron‐sized magnetic poly(methyl methacrylate‐divinylbenzene‐glycidyl methacrylate) microspheres prepared by modified suspension polymerization. Polymers for Advanced Technologies. DOI: 10.1002/pat.618.
- Shubham Sharma, P. Sudhakara, Michal Petrů, Jujhar Singh, et al. (2022). Effect of nanoadditives on the novel leather fiber/recycled poly(ethylene-vinyl-acetate) polymer composites for multifunctional applications: Fabrication, characterizations, and multiobjective optimization using central composite design. Nanotechnology Reviews. DOI: 10.1515/ntrev-2022-0067.
- An‐Ting Chien, Yuan-Haun Lee, King‐Fu Lin (2008). Crosslinkable poly(vinyl acetate)/clay nanocomposite films cast from soap‐free emulsion‐polymerized latices. Journal of Applied Polymer Science. DOI: 10.1002/app.28066.
- Mingjiao Yang, Yi Dan (2006). Preparation of poly(methyl methacrylate)/titanium oxide composite particles via <i>in‐situ</i> emulsion polymerization. Journal of Applied Polymer Science. DOI: 10.1002/app.23223.
- Veera Sadhu, Jürgen Pionteck, Dieter Voigt, Hartmut Komber, et al. (2004). Atom‐Transfer Radical Polymerization: A Strategy for the Synthesis of Halogen‐Free Amino‐Functionalized Poly(methyl methacrylate) in a One‐Pot Reaction. Macromolecular Chemistry and Physics. DOI: 10.1002/macp.200400092.
- Judit E. Puskás, Yongmoon Kwon (2006). Biomacromolecular engineering: design, synthesis and characterization. One‐pot synthesis of block copolymers of arborescent polyisobutylene and polystyrene. Polymers for Advanced Technologies. DOI: 10.1002/pat.770.
- Paul Galanopoulo, Pierre‐Yves Dugas, Muriel Lansalot, Franck D’Agosto (2020). Poly(ethylene glycol)-<i>b</i>-poly(vinyl acetate) block copolymer particles with various morphologies <i>via</i> RAFT/MADIX aqueous emulsion PISA. Polymer Chemistry. DOI: 10.1039/d0py00467g.
- Andrés Bernal-Ballén, Ivo Kuřitka, Petr Sáha (2016). Preparation and Characterization of a Bioartificial Polymeric Material: Bilayer of Cellulose Acetate-PVA. International Journal of Polymer Science. DOI: 10.1155/2016/3172545.
- Anna Liguori, Antonino Pollicino, Augusto Stancampiano, Fabrizio Tarterini, et al. (2015). Deposition of Plasma‐Polymerized Polyacrylic Acid Coatings by a Non‐Equilibrium Atmospheric Pressure Nanopulsed Plasma Jet. Plasma Processes and Polymers. DOI: 10.1002/ppap.201500080.
- A. H. Abdel‐Alim, A. E. Hamielec (1974). GPC calibration for water-soluble polymers. Journal of Applied Polymer Science. DOI: 10.1002/app.1974.070180125.
- Carmen Rizzuto, Dale Teeters, R. Barberi, Marco Castriota (2022). Plasticizers and Salt Concentrations Effects on Polymer Gel Electrolytes Based on Poly (Methyl Methacrylate) for Electrochemical Applications. Gels. DOI: 10.3390/gels8060363.
- Stephan Kobben, Anitha Ethirajan, Tanja Junkers (2014). Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.27180.
- Christian Hils, Emma Fuchs, Franziska Eger, Judith Schöbel, et al. (2020). Converting Poly(Methyl Methacrylate) into a Triple‐Responsive Polymer. Chemistry - A European Journal. DOI: 10.1002/chem.202000485.
- Manuel Martín‐Pastor, Edmont Stoyanov (2020). Mechanism of interaction between hydroxypropyl cellulose and water in aqueous solutions: Importance of polymer chain length. Journal of Polymer Science. DOI: 10.1002/pol.20200185.
- ImadA Abu-Yousef, Durai Prabu, Amin F. Majdalawieh, Kadambari Inbasekaran, et al. (2016). Preparation and characterization of gatifloxacin-loaded sodium alginate hydrogel membranes supplemented with hydroxypropyl methylcellulose and hydroxypropyl cellulose polymers for wound dressing. International Journal of Pharmaceutical Investigation. DOI: 10.4103/2230-973x.177810.
- Yinfeng Shi, Seema Agarwal (2015). Thermally stable optically transparent copolymers of 2-methylene-1,3-dioxepane and <i>N</i> -phenyl maleimide with degradable ester linkages. e-Polymers. DOI: 10.1515/epoly-2015-0096.
- Giovanny M. Soto, E. Nava, Maura Tellez Rosas, Marianela Camacho Fuenmayor, et al. (2004). Bulk polymerization of styrene in the presence of polybutadiene: Effect of initiator type and prepolymerization conditions on particle morphology. Journal of Applied Polymer Science. DOI: 10.1002/app.13679.
- Estibaliz García‐Gaitán, Domenico Frattini, Idoia Ruiz de Larramendi, María Martínez‐Ibáñez, et al. (2023). Flexible Gel Polymer Electrolytes Based on Carboxymethyl Cellulose Blended with Polyvinyl Alcohol or Polyacrylic Acid for Zinc‐Air Batteries. Batteries & Supercaps. DOI: 10.1002/batt.202200570.
- H. Ali, Cleuzilene Silva, Betina Royer, Guimes Rodrigues Filho, et al. (2017). Chemically Modified Polyvinyl Chloride for Removal of Thionine Dye (Lauth’s Violet). Materials. DOI: 10.3390/ma10111298.
- Ethar Yahya Salih, Zulkifly Abbas, Samer Hasan Hussein Al Ali, Mohd Zobir Hussein (2014). Dielectric Behaviour of Zn/Al-NO<sub>3</sub>LDHs Filled with Polyvinyl Chloride Composite at Low Microwave Frequencies. Advances in Materials Science and Engineering. DOI: 10.1155/2014/647120.
- Otto Vogl, Meifang Qin, Albert Zilkha (1999). Head to head polymers. Progress in Polymer Science. DOI: 10.1016/s0079-6700(99)00032-5.
- N.M. Ghazali, N.F. Mazuki, Ahmad Salihin Samsudin (2021). Characterization of Biopolymer Blend-based on Alginate and Poly (vinyl Alcohol) as an Application for Polymer Host in Polymer Electrolyte. IOP Conference Series Materials Science and Engineering. DOI: 10.1088/1757-899x/1092/1/012047.
- Zilong Li, Zilong Li, An Lv, Lei Li, et al. (2013). Periodic ethylene-vinyl alcohol copolymers via ADMET polymerization: Synthesis, characterization, and thermal property. Polymer. DOI: 10.1016/j.polymer.2013.05.037.
- Bin Yang, Brooks A. Abel, Charles L. McCormick, Robson F. Storey (2017). Synthesis of Polyisobutylene Bottlebrush Polymers via Ring-Opening Metathesis Polymerization. Macromolecules. DOI: 10.1021/acs.macromol.7b01655.
- Gokul Gopinath, Pavithra Shanmugaraj, M. Sasikumar, Matbiangthew Shadap, et al. (2023). Cellulose Acetate-based magnesium ion conducting plasticized polymer membranes for EDLC application: Advancement in biopolymer energy storage devices. Applied Surface Science Advances. DOI: 10.1016/j.apsadv.2023.100498.
- B. Keszler, Gy. Fenyvesi, Joseph P. Kennedy (2000). Novel star-block polymers: Three polyisobutylene-b-poly(methyl methacrylate) arms radiating from an aromatic core. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/(sici)1099-0518(20000215)38:4<706::aid-pola5>3.0.co;2-d.
- Vinitha Josh, Mohammad Y. Al‐Haik, Ahmad I. Ayesh, Mahmoud A. Mohsin, et al. (2012). Electrical properties of sorbitol‐doped poly(vinyl alcohol)–poly(acrylamide‐<i>co</i>‐acrylic acid) polymer membranes. Journal of Applied Polymer Science. DOI: 10.1002/app.38619.
- Sung‐Young Park, Hee‐Young Park, Hwa-Soo Lee, Sang‐Wook Park, et al. (2001). Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐<i>co</i>‐ethyl acrylate] by incorporation of carbon dioxide into epoxide polymer and the miscibility behavior of its blends with poly(methyl methacrylate) or poly(vinyl chloride). Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.1124.
- Xian-Sheng Jia, Chengchun Tang, Xu Yan, Gui‐Feng Yu, et al. (2016). Flexible Polyaniline/Poly(methyl methacrylate) Composite Fibers<i>via</i>Electrospinning and In Situ Polymerization for Ammonia Gas Sensing and Strain Sensing. Journal of Nanomaterials. DOI: 10.1155/2016/9102828.
- Yogita P. Mahant, Subhash B. Kondawar, Monali V. Bhute, Deoram V. Nandanwar (2015). Electrospun Poly (Vinylidene Fluoride)/Poly (Methyl Methacrylate) Composite Nanofibers Polymer Electrolyte for Batteries. Procedia Materials Science. DOI: 10.1016/j.mspro.2015.06.011.
- Dusadee Tumnantong, Garry L. Rempel, Pattarapan Prasassarakich (2017). Polyisoprene-Silica Nanoparticles Synthesized via RAFT Emulsifier-Free Emulsion Polymerization Using Water-Soluble Initiators. Polymers. DOI: 10.3390/polym9110637.
- Mohammad Reza Badrossamay, Gang Sun (2008). Graft polymerization of <i>N</i> ‐ <i>tert</i> ‐butylacrylamide onto polypropylene during melt extrusion and biocidal properties of its products. Polymer Engineering and Science. DOI: 10.1002/pen.21289.
- Chun‐Yi Chang‐Chien, Chun‐Han Hsu, Tsung‐Ying Lee, Che‐Wei Liu, et al. (2007). Synthesis of Carbon and Silica Hollow Spheres with Mesoporous Shells using Polyethylene Oxide/Phenol Formaldehyde Polymer Blend. European Journal of Inorganic Chemistry. DOI: 10.1002/ejic.200700210.
- Helena Oliver-Ortega, Shiyu Geng, Francesc X. Espinach, Kristiina Oksman, et al. (2021). Bacterial Cellulose Network from Kombucha Fermentation Impregnated with Emulsion-Polymerized Poly(methyl methacrylate) to Form Nanocomposite. Polymers. DOI: 10.3390/polym13040664.
- Kazunobu Yamada, Tamaki Nakano, Yoshio Okamoto (1998). Stereospecific polymerization of vinyl acetate in fluoroalcohols. Synthesis of syndiotactic poly(vinyl alcohol).. Proceedings of the Japan Academy Series B. DOI: 10.2183/pjab.74.46.
- Bipin S. Chikkatti, Ashok M. Sajjan, N. R. Banapurmath (2024). Facilitating Ionic Conduction in the Valve‐Regulated Lead Acid Battery by Poly(vinyl alcohol)‐Halloysite Nano‐Clay Gel Polymer Electrolyte. Energy Technology. DOI: 10.1002/ente.202301265.
- Hou Chen, Rongjun Qu, Chunnuan Ji, Chunhua Wang, et al. (2005). Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl<sub>3</sub>/isophthalic acid. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.21174.
- Mónica Moreno, M. Ali Aboudzadeh, Marı́a J. Barandiaran, David Mecerreyes (2011). Facile incorporation of natural carboxylic acids into polymers via polymerization of protic ionic liquids. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.25882.
- Sibongile C. Nkabinde, Makwena J. Moloto, Kgabo Phillemon Matabola (2020). Optimized Loading of TiO<sub>2</sub> Nanoparticles into Electrospun Polyacrylonitrile and Cellulose Acetate Polymer Fibers. Journal of Nanomaterials. DOI: 10.1155/2020/9429421.
- Xun Zhang, Ximin Feng, Wenqi Guo, Chengjian Zhang, et al. (2024). Chemically recyclable polyvinyl chloride-like plastics. Nature Communications. DOI: 10.1038/s41467-024-52852-y.
- Yunfei Wang, Song Zhang, Guillaume Freychet, Zhaofan Li, et al. (2023). Highly Deformable Rigid Glassy Conjugated Polymeric Thin Films. Advanced Functional Materials. DOI: 10.1002/adfm.202306576.
- Jagannath Sahoo, A A Mallick, B B Barik, Prakash Ch. Senapati (2007). Preparation and in vitro evaluation of ethyl cellulose microspheres containing stavudine by the double emulsion method. Die Pharmazie. DOI: 10.31083/ph.2007.2.6076.
- Philip B. V. Scholten, Jérémy Demarteau, Sandro Gennen, Julien De Winter, et al. (2018). Merging CO<sub>2</sub>-Based Building Blocks with Cobalt-Mediated Radical Polymerization for the Synthesis of Functional Poly(vinyl alcohol)s. Macromolecules. DOI: 10.1021/acs.macromol.8b00492.
- Minna Annala, Mika Lahelin, Jyri Seppälä (2012). Utilization of poly(methyl methacrylate) – carbon nanotube and polystyrene – carbon nanotube in situ polymerized composites as masterbatches for melt mixing. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2012.87.
- Bastien Darmau, Matthew J. Rymaruk, Nicholas J. Warren, Robert C. Bening, et al. (2020). RAFT dispersion polymerization of benzyl methacrylate in non-polar media using hydrogenated polybutadiene as a steric stabilizer block. Polymer Chemistry. DOI: 10.1039/d0py01371d.
- Saeid Tajbakhsh, Faezeh Hajiali, Milan Marić (2021). Recyclable Polymers with Boronic Ester Dynamic Bonds Prepared by Miniemulsion Polymerization. ACS Applied Polymer Materials. DOI: 10.1021/acsapm.1c00368.
- Shawn H. Chen, Amanda J. Souna, Christopher L. Soles, Stephan J. Stranick, et al. (2020). Using microprojectiles to study the ballistic limit of polymer thin films. Soft Matter. DOI: 10.1039/d0sm00295j.
- F. Campise, L. E. Roth, Rodolfo H. Acosta, Marcelo A. Villar, et al. (2015). Contribution of Linear Guest and Structural Pendant Chains to Relaxational Dynamics in Model Polymer Networks Probed by Time-Domain <sup>1</sup>H NMR. Macromolecules. DOI: 10.1021/acs.macromol.5b01806.
- Jialong Shen, Erol Yıldırım, Shanshan Li, Yavuz Çaydamlı, et al. (2019). Role of Local Polymer Conformations on the Diverging Glass Transition Temperatures and Dynamic Fragilities of Isotactic-, Syndiotactic-, and Atactic-Poly(methyl methacrylate)s. Macromolecules. DOI: 10.1021/acs.macromol.9b00434.
- Jun Wu, J. Pablo Tomba, Mitchell A. Winnik, Rajeev Farwaha, et al. (2004). Temperature Dependence of Polymer Diffusion in Poly(vinyl acetate-<i>c</i><i>o</i>-dibutyl maleate) Latex Films. Macromolecules. DOI: 10.1021/ma030569v.
- Akane Kazama, Yasuhiro Kohsaka (2022). Diverse chemically recyclable polymers obtained by cationic vinyl and ring-opening polymerizations of the cyclic ketene acetal ester “dehydroaspirin”. Polymer Chemistry. DOI: 10.1039/d2py01181f.
- Nihal Kanbargi, Monojoy Goswami, Liam Collins, Logan T. Kearney, et al. (2021). Synthesis of High-Performance Lignin-Based Inverse Thermoplastic Vulcanizates with Tailored Morphology and Properties. ACS Applied Polymer Materials. DOI: 10.1021/acsapm.0c01387.
- Shuangshuang Wang, Houfang Chi, Lin Chen, Wei Li, et al. (2021). Surface Functionalization of Graphene Oxide with Polymer Brushes for Improving Thermal Properties of the Polymer Matrix. Advances in Polymer Technology. DOI: 10.1155/2021/5591420.
- Jasjeet Kaur, Keith R. Millington, Jackie Y. Cai (2016). Rheology of polyacrylonitrile‐based precursor polymers produced from controlled (RAFT) and conventional polymerization: Its role in solution spinning. Journal of Applied Polymer Science. DOI: 10.1002/app.44273.
- Panagiotis Dimitrakellis, Εvangelos Gogolides, Angelos Zeniou, Kamil Awsiuk, et al. (2017). Transition between stable hydrophilization and fast etching/hydrophilization of poly(methyl)methacrylate polymer using a novel atmospheric pressure dielectric barrier discharge source. Journal of Vacuum Science & Technology A Vacuum Surfaces and Films. DOI: 10.1116/1.4984613.
- Yu-Ting Chou, Wei Chih Lee, Shengsheng Yu (2024). Efficient Synthesis of Ultrahigh Molecular Weight Poly(methyl methacrylate) via Visible Light-Induced RAFT Polymerization in Deep Eutectic Solvent. Macromolecules. DOI: 10.1021/acs.macromol.4c01519.
- Seon Jeong Kim, Seon Jeong Kim, Seoung Gil Yoon, Sun I. Kim, et al. (2004). Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol). Polymer International. DOI: 10.1002/pi.1659.
- M. Broglia, Diego F. Acevedo, Denise Langheinrich, Heidi R. Pérez‐Hernández, et al. (2015). Rapid Fabrication of Periodic Patterns on Poly(styrene-co-acrylonitrile) Surfaces Using Direct Laser Interference Patterning. International Journal of Polymer Science. DOI: 10.1155/2015/721035.
- Flávia da Silva Müller Teixeira, Augusto Cesar de Carvalho Peres, Élen Beatriz Acordi Vasques Pacheco (2023). Mechanical recycling of acrylonitrile-butadiene-styrene copolymer and high impact polystyrene from waste electrical and electronic equipment to comply with the circular economy. Frontiers in Sustainability. DOI: 10.3389/frsus.2023.1203457.
- Paula Nunes de Oliveira, Adélio Mendes (2016). Preparation and Characterization of an Eco-Friendly Polymer Electrolyte Membrane (PEM) Based in a Blend of Sulphonated Poly(Vinyl Alcohol)/ Chitosan Mechanically Stabilised by Nylon 6,6. Materials Research. DOI: 10.1590/1980-5373-mr-2016-0387.
- Marcus Schäfer, Philipp C. Wieland, Oskar Nuyken (2002). Synthesis of new graft copolymers containing polyisobutylene by a combination of the 1,1‐diphenylethylene technique and cationic polymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.10472.
- Amani Alruwaili, Adel M. El Sayed (2024). Characterization and the physical properties of nano-sized Bi2O3/polymer for energy and high-refractive index applications. Results in Physics. DOI: 10.1016/j.rinp.2024.107746.
- Luwei Shi, Longxing Zhang, Yanping Yang, Haipeng Zhang, et al. (2023). In Situ Nano-SiO2 Electrospun Polyethylene-Oxide-Based Nano-Fiber Composite Solid Polymer Electrolyte for High-Performance Lithium-Ion Batteries. Nanomaterials. DOI: 10.3390/nano13071294.
- Carlos David Grande‐Tovar, William Vallejo, Fabio Zuluaga (2018). Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization. Molecules. DOI: 10.3390/molecules23092218.
- Vicky Julius Mawuntu, Yusril Yusuf (2018). Porous-structure engineering of hydroxyapatite-based scaffold synthesized from <i>Pomacea canaliculata</i> shell by using polyethylene oxide as polymeric porogen. IOP Conference Series Materials Science and Engineering. DOI: 10.1088/1757-899x/432/1/012045.
- Noriyuki Kato, Shinya Ikeda, Manabu Hirakawa, Hiroshi Itô (2020). Correlation of the Abbe Number, the Refractive Index, and Glass Transition Temperature to the Degree of Polymerization of Norbornane in Polycarbonate Polymers. Polymers. DOI: 10.3390/polym12112484.
- Shiro Kobayashi, Hiroshi Uyama, Jang Hyun Choi, Yasuhiro Matsumoto (1991). Preparation of Micron-size Monodisperse Polymer Particles by Dispersion Copolymerization of Methyl Methacrylate with Poly(2-oxazoline) Macromonomer.. Proceedings of the Japan Academy Series B. DOI: 10.2183/pjab.67.140.
- Wenyan Huang, Weikai Gu, Hongjun Yang, Xiaoqiang Xue, et al. (2017). Preparation and Properties of Branched Polystyrene through Radical Suspension Polymerization. Polymers. DOI: 10.3390/polym9010014.
- Sakrit Hait, J. L. Valentín, Antonio González-Jiménez, Pilar Bernal-Ortega, et al. (2020). Poly(acrylonitrile-co-butadiene) as polymeric crosslinking accelerator for sulphur network formation. Heliyon. DOI: 10.1016/j.heliyon.2020.e04659.
- Volodymyr Lebedev, , 2 Kyrpychova St., Kharkiv 61002, Ukraine, Д. В. Мірошниченко, Serhiy Pyshyev, et al. (2023). Study of Hybrid Humic Acids Modification of Environmentally Safe Biodegradable Films Based on Hydroxypropyl Methyl Cellulose. Chemistry & Chemical Technology. DOI: 10.23939/chcht17.02.357.
- Asmaa Attya Shalaby, Mohamed Hussien Abd Elmageed, Gihan F. Malash, Tamer M. Tamer, et al. (2021). Development of novel cellulose acetate-g-poly(sodium 4-styrenesulfonate) proton conducting polyelectrolyte polymer. Journal of Saudi Chemical Society. DOI: 10.1016/j.jscs.2021.101327.
- Xuan Nui Pham, Duc Trong Pham, Ha Son Ngo, Manh B. Nguyen, et al. (2020). Characterization and application of C–TiO<sub>2</sub> doped cellulose acetate nanocomposite film for removal of Reactive Red-195. Chemical Engineering Communications. DOI: 10.1080/00986445.2020.1712375.
- Shuxian Tang, Ying Zhao, Haitao Wang, Yuqiao Wang, et al. (2018). Preparation of the Sodium Alginate-g-(Polyacrylic Acid-co-Allyltrimethylammonium Chloride) Polyampholytic Superabsorbent Polymer and Its Dye Adsorption Property. Marine Drugs. DOI: 10.3390/md16120476.
- Rubén Octavio Muñoz-García, María Elena Hernández, Genaro G. Ortiz, V.V.A. Fernández, et al. (2015). A NOVEL POLYACRYLAMIDE-BASED HYDROGEL CROSSLINKED WITH CELLULOSE ACETATE AND PREPARED BY PRECIPITATION POLYMERIZATION. Química Nova. DOI: 10.5935/0100-4042.20150119.
- Beike Cai, Shaodong Zhang, Yongfeng Zhou (2021). Green Stereoregular Polymerization of Poly(methyl methacrylate)s Through Vesicular Catalysis. CCS Chemistry. DOI: 10.31635/ccschem.021.202101011.
- Katarzyna Czarnobaj (2010). Sol–gel-processed silica/polydimethylsiloxane/calcium xerogels as polymeric matrices for Metronidazole delivery system. Polymer Bulletin. DOI: 10.1007/s00289-010-0332-8.
- Yanfen Zhang, Xiang Chen, Leikai Li, Wei Chen, et al. (2019). Mesoporous Polymer Loading Heteropolyacid Catalysts: One-Step Strategy To Manufacture High Value-Added Cellulose Acetate Propionate. ACS Sustainable Chemistry & Engineering. DOI: 10.1021/acssuschemeng.8b05627.
- Ewelina Ortyl, S. Kucharski (2003). Refractive index modulation in polymeric photochromic films. Open Chemistry. DOI: 10.2478/bf02479265.
- Sidsel Ø. Andreasen, Siow‐Feng Chong, Benjamin M. Wohl, Kenneth N. Goldie, et al. (2013). Poly(vinyl alcohol) Physical Hydrogel Nanoparticles, Not Polymer Solutions, Exert Inhibition of Nitric Oxide Synthesis in Cultured Macrophages. Biomacromolecules. DOI: 10.1021/bm400369u.
- Yi‐Jen Huang, Chien‐Lin Huang, Ruo-Yu Lai, Cheng-Han Zhuang, et al. (2021). Microstructure and Biological Properties of Electrospun In Situ Polymerization of Polycaprolactone-Graft-Polyacrylic Acid Nanofibers and Its Composite Nanofiber Dressings. Polymers. DOI: 10.3390/polym13234246.
- Daniel Funes-Hernando, Pablo Hermosilla, Eugenio Vispe, Andrea Di Giuseppe, et al. (2018). Vinylidene-based polymers by Rh(<scp>i</scp>)-NHC catalyzed thiol–yne click polymerization: synthesis, characterization and post-polymerization modification. Polymer Chemistry. DOI: 10.1039/c8py00261d.
- Asmalina Mohamed Saat, Mohd Rafie Johan (2014). The Surface Structure and Thermal Properties of Novel Polymer Composite Films Based on Partially Phosphorylated Poly(vinyl alcohol) with Aluminum Phosphate. The Scientific World JOURNAL. DOI: 10.1155/2014/439839.
- Haythem A. Saadeh, Eman A. Abu Shairah, Noureddine Charef, Mohammad S. Mubarak (2011). Synthesis and adsorption properties, toward some heavy metal ions, of a new polystyrene‐based terpyridine polymer. Journal of Applied Polymer Science. DOI: 10.1002/app.34977.
- Asako Narita, Juro Oshima, Yuko Iso, Shuma Hasegawa, et al. (2021). Red-sensitive organic nanoparticle-polymer composite materials for volume holographic gratings with large refractive index modulation amplitudes. Optical Materials Express. DOI: 10.1364/ome.415422.
- Laura Susana Acosta‐Torres, F. H. Barceló‐Santana, Carlos Alvarez‐Gayosso, J. Reyes‐Gasga (2008). Synthesis and characterization of poly(methyl methacrylate) polymerized by microwave energy or conventional water bath. Journal of Applied Polymer Science. DOI: 10.1002/app.28569.
- Jinghui Hu, Weiqiang Tang, Yonghui Li, Jiyu He, et al. (2020). The Effect of Glycidyl Azide Polymer Grafted Tetrafunctional Isocyanate on Polytriazole Polyethylene Oxide-Tetrahydrofuran Elastomer and its Propellant Properties. Polymers. DOI: 10.3390/polym12020278.
- Igor Ayesta, Joseba Zubía, J. Arrué, M. A. Illarramendi, et al. (2017). Characterization of Chromatic Dispersion and Refractive Index of Polymer Optical Fibers. Polymers. DOI: 10.3390/polym9120730.
- Arwa Alrooqi, Zahra M. Al-Amshany, Laila M. Al-Harbi, Tariq Altalhi, et al. (2022). Impact of Charge Transfer Complex on the Dielectric Relaxation Processes in Poly(methyl methacrylate) Polymer. Molecules. DOI: 10.3390/molecules27061993.
- Patrícia Simon, Janaína de Souza Lima, Alexsandra Valério, Débora de Olíveira, et al. (2018). CELLULASE IMMOBILIZATION ON POLY(METHYL METHACRYLATE) NANOPARTICLES BY MINIEMULSION POLYMERIZATION. Brazilian Journal of Chemical Engineering. DOI: 10.1590/0104-6632.20180352s20160094.
- Prateek Raj, A. Dentino (2011). New phosphated poly(methyl methacrylate) polymers for the prevention of denture-induced microbial infection: an in vitro study. Clinical Cosmetic and Investigational Dentistry. DOI: 10.2147/cciden.s16860.
- Tao Ding, Qian Wu, Zhen Nie, Mianping Zheng, et al. (2022). Selective recovery of lithium resources in salt lakes by polyacrylonitrile/ion-imprinted polymer: Synthesis, testing, and computation. Polymer Testing. DOI: 10.1016/j.polymertesting.2022.107647.
- Uday Shankar, Subhendu Bhandari, Dipak Khastgir (2018). Carbon Black‐Filled Nitrile Rubber Composite as a Flexible Electrode for Electrochemical Synthesis of Supercapacitive Polyaniline. Polymer Composites. DOI: 10.1002/pc.25069.
- Mingxuan Zou, Zhicheng Zhang, Wei‐Dong He, Xuewu Ge, et al. (2004). Preparation and characterization of core–shell polystyrene–polydimethylsiloxane particles by seeded polymerization. Polymer International. DOI: 10.1002/pi.1470.
- Ni Huo, Jeremy Rivkin, Ruobin Jia, Yineng Zhao, et al. (2024). Synthesis of High Refractive Index Polymer Thin Films for Soft, Flexible Optics Through Halomethane Quaternization of Poly(4‐Vinylpyridine). Advanced Optical Materials. DOI: 10.1002/adom.202302201.
- Chunxing Li, Liqi Ou, Yi Liu, Linhe Xu, et al. (2023). A Cellulose/Polyethylene Oxide Gel Polymer Electrolyte with Enhanced Mechanical Strength and High Ionic Conductivity for Lithium‐Ion Batteries. Advanced Materials Technologies. DOI: 10.1002/admt.202202002.
- Xiaoqian Zhang, Wenli Guo, Yibo Wu, Yuwei Shang, et al. (2018). Synthesis of random copolymer of isobutylene with <i>p</i> -methylstyrene by cationic polymerization in ionic liquids. e-Polymers. DOI: 10.1515/epoly-2018-0017.
- Nikola Španić (2015). Chemical and Thermal Properties of Cellulose Acetate Prepared from White Willow (Salix alba) and Black Alder (Alnus glutinosa) as a Potential Polymeric Base of Biocomposite Materials. Chemical and Biochemical Engineering Quarterly. DOI: 10.15255/cabeq.2015.2176.
- Martina Hrabalíková, Pavlína Holčapková, Pavol Šuly, Vladimír Sedlařík (2016). Immobilization of bacteriocin nisin into a poly(vinyl alcohol) polymer matrix crosslinked with nontoxic dicarboxylic acid. Journal of Applied Polymer Science. DOI: 10.1002/app.43674.
- Fei Ma, Jian Zhu, Zhengbiao Zhang, Xiangqiang Pan, et al. (2013). Seleno‐containing poly(vinyl acetate) prepared by diselenocarbonates‐mediated controlled free radical polymerizations. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.26701.
- Tso‐Pei Chiu, Trong‐Ming Don (2008). Synthesis and characterization of poly(methyl methacrylate) nanoparticles by emulsifier‐free emulsion polymerization with a redox‐initiated system. Journal of Applied Polymer Science. DOI: 10.1002/app.28386.
- Monika Rymarczyk‐Machał, Szczepan Zapotoczny, Maria Nowakowska (2006). Synthesis and characterization of novel photoactive polymer poly(vinyl alcohol)‐<i>graft</i>‐poly(vinyl naphthalene). Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.21396.
- Dian Pribadi Perkasa, Erizal Erizal, Basril Abbas (2013). POLYMERIC BIOMATERIALS FILM BASED ON POLY(VINYL ALCOHOL) AND FISH SCALE COLLAGEN BY REPETITIVE FREEZE-THAW CYCLES FOLLOWED BY GAMMA IRRADIATION. Indonesian Journal of Chemistry. DOI: 10.22146/ijc.21280.
- Lixin Xu, Feng Xu, Feng Chen, Jintao Yang, et al. (2011). Improvement in Comprehensive Properties of Poly(Methyl Methacrylate)‐Based Gel Polymer Electrolyte by a Core‐Shell Poly(Methyl Methacrylate)‐Grafted Ordered Mesoporous Silica. Journal of Nanomaterials. DOI: 10.1155/2012/457967.
- W. H. Embree, J. M. Mitchell, H. Leverne Williams (1951). COMPOSITIONAL HETEROGENEITY OF BUTADIENE–ACRYLONITRILE COPOLYMERS PREPARED IN EMULSION AT 5°C. Canadian Journal of Chemistry. DOI: 10.1139/v51-031.
- Chuang Zhang, Li Long, Yuanhang Xin, Jiaqi You, et al. (2021). Development of Trans-1,4-Polyisoprene Shape-Memory Polymer Composites Reinforced with Carbon Nanotubes Modified by Polydopamine. Polymers. DOI: 10.3390/polym14010110.
- I. I. Ponomarev, Igor I. Ponomarev, Kirill M. Skupov, О. М. Жигалина, et al. (2020). New Carbon Nanofiber Composite Materials Containing Lanthanides and Transition Metals Based on Electrospun Polyacrylonitrile for High Temperature Polymer Electrolyte Membrane Fuel Cell Cathodes. Polymers. DOI: 10.3390/polym12061340.
- Nazim Pallab, Stefan Reinicke, Johannes Gurke, Rainer Rihm, et al. (2023). Polymer brush-assisted microcontact printing: using a tailor-made polydimethylsiloxane (PDMS) stamp for precise patterning of rough surfaces. Polymer Chemistry. DOI: 10.1039/d3py01036h.
- G. K. Elyashevich, E. Yu. Rosova, Z. F. Zoolshoev, Natalia Saprykina, et al. (2023). Reversibility of Swelling, pH Sensitivity, Electroconductivity, and Mechanical Properties of Composites Based on Polyacrylic Acid Hydrogels and Conducting Polymers. Journal of Composites Science. DOI: 10.3390/jcs7060261.
- Helyati Abu Hassan Shaari, Muhammad Mahyiddin Ramli, Mohd Mustafa Al Bakri Abdullah, Mohd Nazim Mohtar, et al. (2022). Effects of Polymerization Time towards Conductivity and Properties of Poly(methyl methacrylate)/Polyaniline (PMMA/PANi) Copolymer. Sustainability. DOI: 10.3390/su14148940.
- Krzysztof Artur Bogdanowicz, Dariusz Augustowski, Justyna Dziedzic, Paweł Kwaśnicki, et al. (2020). Preparation and Characterization of Novel Polymer-Based Gel Electrolyte for Dye-Sensitized Solar Cells Based on poly(vinylidene fluoride-co-hexafluoropropylene) and poly(acrylonitrile-co-butadiene) or poly(dimethylsiloxane) bis(3-aminopropyl) Copolymers. Materials. DOI: 10.3390/ma13122721.
- Alina Ruxandra Caramitu, Magdalena Valentina Lungu, Romeo Cristian Ciobanu, Ioana Ion, et al. (2024). Recycled Polypropylene/Strontium Ferrite Polymer Composite Materials with Electromagnetic Shielding Properties. Polymers. DOI: 10.3390/polym16081129.
- Umesh Kumar, Diwakar Padalia, Prabhakar Bhandari, Pawan Kumar, et al. (2022). Fabrication of Europium-Doped Barium Titanate/Polystyrene Polymer Nanocomposites Using Ultrasonication-Assisted Method: Structural and Optical Properties. Polymers. DOI: 10.3390/polym14214664.
- Marta Sieradzka, Janusz Fabia, Dorota Biniaś, Ryszard Fryczkowski, et al. (2020). The Role of Reduced Graphene Oxide in the Suspension Polymerization of Styrene and Its Effect on the Morphology and Thermal Properties of the Polystyrene/rGO Nanocomposites. Polymers. DOI: 10.3390/polym12071468.
- Shuangshuang Zhang, Lu Yin, Junzhi Wang, Wei Zhang, et al. (2017). A Green Platform for Preparation of the Well-Defined Polyacrylonitrile: 60Co γ-ray Irradiation-Initiated RAFT Polymerization at Room Temperature. Polymers. DOI: 10.3390/polym9010026.
- Suneyana Rawat, Pramod K. Singh, Shri Prakash Pandey, Ram Chandra Singh (2024). Review on Comparative Study of Solid Polymer Electrolyte Polyethylene Oxide (PEO) Doped with Ionic Liquid. Macromolecular Symposia. DOI: 10.1002/masy.202300050.
- R J Lee, Zeinab Abbas Jawad, Abdul Latif Ahmad, Jia Qiang Ngo, et al. (2017). Improvement of CO<sub>2</sub>/N<sub>2</sub>separation performance by polymer matrix cellulose acetate butyrate. IOP Conference Series Materials Science and Engineering. DOI: 10.1088/1757-899x/206/1/012072.
- Nigel Clarke, Lian R. Hutchings, Ian Robinson, Judith A. Elder, et al. (2009). Suspension polymerization of poly(methyl methacrylate)/clay nanocomposites. Journal of Applied Polymer Science. DOI: 10.1002/app.30128.
- Yushan Liu, Peng Liu, Zhixing Su (2007). Morphological characterization of attapulgite/poly(methyl methacrylate) particles prepared by soapless emulsion polymerization. Polymer International. DOI: 10.1002/pi.2347.
- Stefano Scurti, Jacopo Ortolani, Alberto Ghirri, Emanuele Maccaferri, et al. (2023). Phosphorylated poly(vinyl alcohol) surface coatings as intumescent flame inhibitor for polymer matrix composites. Progress in Organic Coatings. DOI: 10.1016/j.porgcoat.2023.107457.
- K. M. Manikandan, A. Yelilarasi, S. S. Saravanakumar, Raed H. Althomali, et al. (2021). The Effect of Plasticizers on the Polypyrrole-Poly(vinyl alcohol)-Based Conducting Polymer Electrolyte and Its Application in Semi-Transparent Dye-Sensitized Solar Cells. Membranes. DOI: 10.3390/membranes11100791.
- Dongguang Yan, Guisheng Yang (2011). Effect of multiwalled carbon nanotubes on the morphology and electrical properties of polyamide 6/polystyrene blends prepared via successive polymerization. Journal of Applied Polymer Science. DOI: 10.1002/app.35680.
- Abdessamade Benahmed, Khalil Azzaoui, Abderahmane El Idrissi, B. Hammouti, et al. (2022). Cellulose Acetate-g-Polycaprolactone Copolymerization Using Diisocyanate Intermediates and the Effect of Polymer Chain Length on Surface, Thermal, and Antibacterial Properties. Molecules. DOI: 10.3390/molecules27041408.
- Y.N. Sudhakar, M. Selvakumar, D. Krishna Bhat (2022). Enhancement and investigation of biodegradability of poly (methyl methacrylate) and poly (vinyl chloride) by blending with biodegradable polymer. Polymer Bulletin. DOI: 10.1007/s00289-022-04319-7.
- Odinei Fogolari, Arlindo C. Felippe, Fernanda Vitória Leimann, Odinei Hess Gonçalves, et al. (2017). Method Validation for Progesterone Determination in Poly(methyl methacrylate) Nanoparticles Synthesized via Miniemulsion Polymerization. International Journal of Polymer Science. DOI: 10.1155/2017/9603140.
- Ye Wu, Hao Fu, Laibao Zhang, Yingcheng Lin, et al. (2018). Toward a Rapid-Fabricated Triboelectric Device with a 1,3-Phosphorylated Poly(vinyl alcohol) Polymer for Water Turbulence Energy Harvesting. ACS Omega. DOI: 10.1021/acsomega.8b00895.
- P. A. Raj, Andrew Dentino (2011). New phosphated poly(methyl methacrylate) polymers for the prevention of denture-induced microbial infection: an in vitro study. Clinical Cosmetic and Investigational Dentistry. DOI: 10.2147/ccide.s16860.
- Jung-Yun Ha, Sung‐Hun Kim, Kyo‐Han Kim, Tae‐Yub Kwon (2011). Influence of the volumes of bis-acryl and poly(methyl methacrylate) resins on their exothermic behavior during polymerization. Dental Materials Journal. DOI: 10.4012/dmj.2010-188.
- Zhiyuan Chen, Qunzhang Tu, Zhonghang Fang, Xinmin Shen, et al. (2022). Molecular Dynamics Studies of the Mechanical Behaviors and Thermal Conductivity of Polyisoprene with Different Degrees of Polymerization. Polymers. DOI: 10.3390/polym14224950.
- Jirui Zhang, William Pointer, Georgios Patias, Lucas Al-Shok, et al. (2022). End functionalization of polyisoprene and polymyrcene obtained by anionic polymerization via one-pot ring-opening mono-addition of epoxides. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2022.111755.
- Cédric Van Goethem, Mikael Monga Mulunda, Rhea Verbeke, Tönjes Koschine, et al. (2018). Increasing Membrane Permeability by Increasing the Polymer Crystallinity: The Unique Case of Polythiophenes. Macromolecules. DOI: 10.1021/acs.macromol.8b01635.
- Voon Huey Lim, Yuji Yamashita, Yen Doan, Yasuhisa Adachi (2018). Inhibition of Cationic Polymer-Induced Colloid Flocculation by Polyacrylic Acid. Water. DOI: 10.3390/w10091215.
- A‐Ra Cho, Soo‐Young Park (2015). Synthesis of titania- and silica-polymer hybrid materials and their application as refractive index-matched layers in touch screens. Optical Materials Express. DOI: 10.1364/ome.5.000690.
- A.M. Al-Sabagh, M.E. Hassan, S.D.M. Dosouky, N. M. Nasser, et al. (2015). Preparation of some thermal stable polymers based on diesters of polyethylene and polypropylene oxides macro monomers to use as surfactants at high temperature and pressure. Egyptian Journal of Petroleum. DOI: 10.1016/j.ejpe.2015.08.001.
- Zhuoqun Wang, Rinaldo Poli, Christophe Detrembleur, Antoine Debuigne (2019). Organometallic-Mediated Radical (Co)polymerization of γ-Methylene-γ-Butyrolactone: Access to pH-Responsive Poly(vinyl alcohol) Derivatives. Macromolecules. DOI: 10.1021/acs.macromol.9b01838.
- Qiaohuan Cheng, Zhanxia Lü, Hugh J. Byrne (2009). Synthesis of a maleic anhydride grafted polypropylene–butadiene copolymer and its application in polypropylene/styrene–butadiene–styrene triblock copolymer/organophilic montmorillonite composites as a compatibilizer. Journal of Applied Polymer Science. DOI: 10.1002/app.30678.
- Mengen Liu, Qianyi Tang, Baijun Liu, Mingyao Zhang (2024). Preparation of poly(butyl acrylate)‐grafted‐poly(styrene‐co‐acrylonitrile) particles for toughening poly(styrene‐co‐acrylonitrile) resin. Polymer Engineering and Science. DOI: 10.1002/pen.26848.
- Woong Gi Lee, Younghyun Cho, Sang Wook Kang (2020). Effect of Ionic Radius in Metal Nitrate on Pore Generation of Cellulose Acetate in Polymer Nanocomposite. Polymers. DOI: 10.3390/polym12040981.
- Naoto Aoyagi, Takeshi Endo (2019). Synthesis of aliphatic polymers with high refractive index by photoinduced polyaddition of thiols to bifunctional allyl monomer containing tetrathiaspiro structure. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.29377.
- Daniel Pugar, Tatjana Haramina, Mirela Leskovac, Lidija Ćurković (2024). Preparation and Characterization of Poly(vinyl-alcohol)/Chitosan Polymer Blend Films Chemically Crosslinked with Glutaraldehyde: Mechanical and Thermal Investigations. Molecules. DOI: 10.3390/molecules29245914.
- Heying Wang, Xu Fang, Kun Cui, Hao Zhang, et al. (2017). Synthesis of polymethylene-b-poly(vinyl acetate) block copolymer via visible light induced radical polymerization and its application. RSC Advances. DOI: 10.1039/c7ra06908a.
- Julien Fage, Konrad Knoll, Norbert Nießner, Oliver Carstensen, et al. (2019). Poly (Butyl Acrylate)-Graft-Polystyrene Synthesis by Free-Radical Polymerization: Interplay between Structure, Morphology, Mechanical, and Optical Properties. Polymers. DOI: 10.3390/polym11081317.
- Maximilian Röhrl, Justus F. Ködel, Renee L. Timmins, Christoph Callsen, et al. (2023). New Functional Polymer Materials via Click Chemistry-Based Modification of Cellulose Acetate. ACS Omega. DOI: 10.1021/acsomega.2c06811.
- EFSA Panel on Food Additives and Flavourings (FAF), Maged Younes, Gabriele Aquilina, Karl‐Heinz Engel, et al. (2021). Safety evaluation of crosslinked polyacrylic acid polymers (carbomer) as a new food additive. EFSA Journal. DOI: 10.2903/j.efsa.2021.6693.
- Moriyuki Sato, Tomohiro Koshino, Yasuko Kajitani, Isamu Inamura, et al. (2004). Miscibility study of polymer blends composed of semirigid thermotropic liquid crystalline polycarbonate, poly(vinyl alcohol), and chitosan. Journal of Applied Polymer Science. DOI: 10.1002/app.20610.
- R. Chen, Fuxiang Chu, C. Gauthier, Laurent Chazeau, et al. (2010). New ethyl cellulose/acrylic hybrid latexes and coatings via miniemulsion polymerization. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.23998.
- Yukiya Kitayama, Shunsuke Takigawa, Atsushi Harada (2023). Effect of Poly(Vinyl Alcohol) Concentration and Chain Length on Polymer Nanogel Formation in Aqueous Dispersion Polymerization. Molecules. DOI: 10.3390/molecules28083493.
- Jorge Alejandro Benítez-Martínez, Itzel Marisol Garnica-Palafox, Genaro Vázquez‐Victorio, Mathieu Hautefeuille, et al. (2021). Semi-interpenetrating polymeric networks based on poly(dimethylsiloxane)-chitosan-poly(vinyl alcohol) crosslinked with genipin with possible use in biomedical applications. Journal of Materials Science. DOI: 10.1007/s10853-020-05683-3.
- Refik Arat, Nurseli Uyanık (2017). Surface Modification of Nanoclays with Styrene-Maleic Anhydride Copolymers. Natural Resources. DOI: 10.4236/nr.2017.83011.
- J. L. Mateo, Marta M. Calvo, P. Bosch (2001). Photoinitiated polymerization of methacrylic monomers in a poly(methyl methacrylate) matrix: A comparative study with other matrices (styrene–butadiene–styrene, polystyrene, and polybutadiene). Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.10099.
- I Kadek Hariscandra Dinatha, Muhammad Amir Jamilludin, Apri I. Supii, Hevi Wihadmadyatami, et al. (2023). Porous scaffold hydroxyapatite from sand lobster shells (<scp><i>Panulirus homarus</i></scp>) using polyethylene oxide/chitosan as polymeric porogen for bone tissue engineering. Journal of Biomedical Materials Research Part B Applied Biomaterials. DOI: 10.1002/jbm.b.35341.
- Darya A. Kuznetsova, Dinar R. Gabdrakhmanov, Denis M. Kuznetsov, С. С. Лукашенко, et al. (2021). Polymer–Colloid Complexes Based on Cationic Imidazolium Amphiphile, Polyacrylic Acid and DNA Decamer. Molecules. DOI: 10.3390/molecules26082363.
- Chunjing Zhang, Shian Zhong, Zhengpeng Yang (2008). Cellulose acetate-based molecularly imprinted polymeric membrane for separation of vanillin and o-vanillin. Brazilian Journal of Chemical Engineering. DOI: 10.1590/s0104-66322008000200014.
- James Delorme, Olivier Boyron, Pierre‐Yves Dugas, Pierre‐Emmanuel Dufils, et al. (2020). Poly(vinyl acetate-<i>co</i>-ethylene) particles prepared by surfactant-free emulsion polymerization in the presence of a hydrophilic RAFT/MADIX macromolecular chain transfer agent. Polymer Chemistry. DOI: 10.1039/d0py01266a.
- Abdulaziz Ibrahim Al‐Ghonamy, A. A. El‐Wakil, Mohamed Ramadan (2010). Enhancement the Thermal Stability and the Mechanical Properties of Acrylonitrile-Butadiene Copolymer by Grafting Antioxidant. International Journal of Polymer Science. DOI: 10.1155/2010/981690.
- Giannis Kontos, Costas Tsioptsias, Ioannis Tsivintzelis (2024). Cellulose Acetate–Ionic Liquid Blends as Potential Polymers for Efficient CO2 Separation Membranes. Polymers. DOI: 10.3390/polym16040554.
- М. Ж. Буркеев, S. R. Shibayeva, Т. О. Хамитова, J. Plocek, et al. (2021). Synthesis and Catalytic Properties of New Polymeric Monometallic Composites Based on Copolymers of Polypropylene Glycol Maleate Phthalate with Acrylic Acid. Polymers. DOI: 10.3390/polym13244369.
- Ruoyu Hong, Tian Pan, Y.P. Han, S. Z. Zhang, et al. (2007). Graft polymerization synthesis and application of magnetic Fe<sub>3</sub>O<sub>4</sub>/polyacrylic acid composite nanoparticles. Journal of Applied Polymer Science. DOI: 10.1002/app.25142.
- Mahmoud Abo-Elmaaref, Mohamed A. Marouf, Wael S. Mohamed, Walaa A. Abdel Wahab (2023). Antifungal and consolidation properties of linen textiles treated with silver nanoparticles loaded on hydroxypropyl cellulose polymer. Heritage Science. DOI: 10.1186/s40494-023-00964-x.
- Shuang Lian, Yu Wang, Hai‐Feng Ji, Xiaojie Zhang, et al. (2021). Cationic Cyclopropenium-Based Hyper-Crosslinked Polymer Enhanced Polyethylene Oxide Composite Electrolyte for All-Solid-State Li-S Battery. Nanomaterials. DOI: 10.3390/nano11102562.
- Lauren E. Ball, Michael‐Phillip Smith, Bert Klumperman (2025). Bioderived copolymer alternatives to poly(styrene- <i>co</i> -maleic anhydride) <i>via</i> RAFT-mediated copolymerization. Polymer Chemistry. DOI: 10.1039/d4py01227e.
- Suthisa Onthong, Thirawudh Pongprayoon, Edgar A. O’Rear (2024). Sequential Admicellar Polymerization of Polyindole and Poly(vinyl Acetate) for Increasing Electrical Conductivity and Water Dispersion of Multiwalled Carbon Nanotubes. ACS Applied Polymer Materials. DOI: 10.1021/acsapm.4c02885.
- Mihai Cosmin Corobea, V.I. Uricanu, Dan Donescu, S. Deladi, et al. (2006). Variable morphologies of poly(vinyl acetate)–montmorillonite nanocomposites obtained by emulsion polymerization in the presence of poly(vinyl pyrrolidone). e-Polymers. DOI: 10.1515/epoly.2006.6.1.767.
- Mohamed H. El‐Newehy, Meera Moydeen Abdulhameed, Ali Aldalbahi, Badr M. Thamer, et al. (2020). Biocidal Polymers: Synthesis, Characterization and Antimicrobial Activity of Bis-Quaternary Onium Salts of Poly(aspartate-co-succinimide). Polymers. DOI: 10.3390/polym13010023.
- C. C. Sun, A. H. You, Lay Lian Teo, Li Wah Thong (2018). Effect of Al2O3 in poly(methyl methacrylate) composite polymer electrolytes. AIP conference proceedings. DOI: 10.1063/1.5034559.
- Frank Lee, Rowan Radmall, Joel Heming, David M. Haddleton, et al. (2025). Hydroxyl-terminated polybutadienes (HTPB) and glycidyl azide polymer (GAP) as solid rocket propellant binders: A review of synthesis and properties. European Polymer Journal. DOI: 10.1016/j.eurpolymj.2025.114209.
- Nikan Mokarinezhad, Seyed Saeid Hosseini, Edward N. Nxumalo (2023). Development of polyamide/<scp>polyacrylonitrile</scp> thin film composite <scp>RO</scp> membranes by interfacial polymerization assisted with an aromatic/aliphatic organic solvent mixture. Journal of Applied Polymer Science. DOI: 10.1002/app.53811.
- José Costa de Macêdo Neto, Bruno Mello de Freitas, Adalberto Gomes de Miranda, Reinaldo de Almeida Rodrigues, et al. (2023). The Stability and Properties of Polystyrene/Kaolinite Nanocomposites during Synthesis via Emulsion Polymerization. Polymers. DOI: 10.3390/polym15092094.
- P. Ehrlich, N.J. De Lollis (1953). Dielectric relaxation in a styrene-acrylonitrile copolymer during and after its polymerization. Journal of research of the National Bureau of Standards. DOI: 10.6028/jres.051.019.
- Suneyana Rawat, Pramod K. Singh, Muhd Zu Azhan Yahya, S.N.F. Yusuf, et al. (2025). Polyethylene Oxide Incorporated Ammonium Iodide Doped With Ionic Liquid Trihexyl (Tetradecy) Phosphonium Dicyanamide‐Based Polymer Electrolyte for Dual Energy Storage Devices. Energy Storage. DOI: 10.1002/est2.70107.
- Leonid M. Goldenberg, Mathias Köhler, O. Kahle, Christian Dreyer (2020). Impact of inorganic nanoparticles on optical properties of low refractive index waveguiding polymers. Optical Materials Express. DOI: 10.1364/ome.405700.
- Gregory N. Smith, Matthew J. Derry, James E. Hallett, Joseph R. Lovett, et al. (2019). Refractive index matched, nearly hard polymer colloids. Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences. DOI: 10.1098/rspa.2018.0763.
- Jianfei Li, Hongchi Zhao, Wantai Yang (2023). Preparation, acidolysis kinetics and scale inhibition performance of low molecular weight poly(maleic anhydride‐<i>alt</i>‐vinyl acetate) based on self‐stabilized precipitation polymerization. Journal of Applied Polymer Science. DOI: 10.1002/app.54475.
- Andrei A. Korigodskii, Artem E. Zhirnov, A. S. Kechek’yan, S. B. Zezin (2022). Transparent Polymer Blends of Poly(methyl methacrylate) and Poly(propylene glycol). Polymers. DOI: 10.3390/polym14112171.
- Jingyang Pu, Baojun Bai, Thomas Schuman (2021). Systematic Evaluation of a Novel Self-Healing Poly(acrylamide-co-vinyl acetate)/Alginate Polymer Gel for Fluid Flow Control in High Temperature and High Salinity Reservoirs. Polymers. DOI: 10.3390/polym13213616.
- Amanda Lélis de Souza, Arthur Vinícius de Abreu Oliveira, Laísse Dias Ribeiro, Allan Robledo Fialho e Moraes, et al. (2025). Experimental and Theoretical Analysis of Dopamine Polymerization on the Surface of Cellulose Nanocrystals and Its Reinforcing Properties in Cellulose Acetate Films. Polymers. DOI: 10.3390/polym17030345.
- Muhammad Asif Iqbal, Asif Mahmood, Waheed Al‐Masry, Chan Ho Park, et al. (2024). Versatile poly(<i>N</i>-vinylcaprolactam)-<i>grafted</i>-hydroxypropyl cellulose polymers with tailored thermo- and pH-responsive properties <i>via</i> sustainable organocatalyzed atom transfer radical polymerization. Polymer Chemistry. DOI: 10.1039/d4py00931b.
- Gaishi Murakami, Tomohiro Kubo, Kotaro Satoh (2023). Precision Synthesis of End-Functionalized Star Poly(vinyl alcohol)s by RAFT Polymerization and Post-polymerization Modification. Precision Chemistry. DOI: 10.1021/prechem.3c00051.
- Ananya Bardhan, Senthilmurugan Subbiah, Kaustubha Mohanty, Ibrar Ibrar, et al. (2022). Feasibility of Poly (Vinyl Alcohol)/Poly (Diallyldimethylammonium Chloride) Polymeric Network Hydrogel as Draw Solute for Forward Osmosis Process. Membranes. DOI: 10.3390/membranes12111097.
- Min Zhang, Shengjun Lu, Enhui Xu, Min He, et al. (2014). A new method for preparation of low melting point polyamide-6 (LPA6) and properties of compatibilized blends of LPA6/glass beads/styrene and maleic anhydride copolymer. Science and Engineering of Composite Materials. DOI: 10.1515/secm-2013-0321.
- Xiuhui Zhang, Lishuang Ma, Jing Dong, Weitian Li, et al. (2024). Facile and efficient in-situ end-functionalization of neodymium-based polybutadiene by isocyanate via a coordinative chain transfer polymerization strategy. Polymer. DOI: 10.1016/j.polymer.2024.127166.
- Tamara Alhilfi, Pierre Chambon, Steve P. Rannard (2020). Architectural control of polystyrene physical properties using branched anionic polymerization initiated at ambient temperature. Journal of Polymer Science. DOI: 10.1002/pol.20200143.
- Mirela‐Fernanda Zaltariov (2021). FTIR INVESTIGATION ON CRYSTALLINITY OF HYDROXYPROPYL METHYL CELLULOSE-BASED POLYMERIC BLENDS. Cellulose Chemistry and Technology. DOI: 10.35812/cellulosechemtechnol.2021.55.84.
- Mikel Azkune, Ángel Ortega-Gomez, Igor Ayesta, Joseba Zubía (2020). Refractive-Index Profile Reconstruction in Graded-Index Polymer Optical Fibers Using Raman Spectroscopy. Materials. DOI: 10.3390/ma13102251.
- Daniela Saviello, Daniele Cespi, Vinay Sharma, Shida Miao, et al. (2017). The Frontier of Biobased Polymers: Synthesis, Characterization, Application, and Sustainability Assessment. International Journal of Polymer Science. DOI: 10.1155/2017/5638598.
- Qing Liu, Kin Seng Chiang, L. Reekie, Y. T. Chow (2011). CO_2 laser induced refractive index changes in optical polymers. Optics Express. DOI: 10.1364/oe.20.000576.
- Miklós Nagy, Miklós Zsuga, David Racz, Sándor Kéki (2010). Synthesis of phenanthroline‐terminated polymers and their Fe(II)‐complexes. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.24054.
- Zirui Song, Baijun Liu, Mingyao Zhang (2024). Compatibilizing and toughening of the styrene and acrylonitrile copolymer and core‐shell impact modifier obtained by agglomerate technologies. Polymer Engineering and Science. DOI: 10.1002/pen.26992.
- Jun Wu, J. Pablo Tomba, Jung Kwon Oh, Mitchell A. Winnik, et al. (2005). Synthesis of dye‐labeled poly(vinyl acetate‐<i>co</i>‐ethylene) (EVA) latex and polymer diffusion in their latex films. Journal of Polymer Science Part A Polymer Chemistry. DOI: 10.1002/pola.21029.
- Xu Yao, Qinwen Wang, Yuanbo Wang, Falu Hu, et al. (2024). One-Step Synthesis of Polyethyleneimine-Grafted Styrene-Maleic Anhydride Copolymer Adsorbents for Effective Adsorption of Anionic Dyes. Molecules. DOI: 10.3390/molecules29081887.
- Pengfei Ma, Christopher M. Plummer, Wenjun Luo, Jiyan Pang, et al. (2022). Exhaustive Baeyer–Villiger oxidation: a tailor-made post-polymerization modification to access challenging poly(vinyl acetate) copolymers. Chemical Science. DOI: 10.1039/d2sc03492a.
- Tong-Wei Li, Shuqiang Yang, Shuai Li (2016). Preparation and characterisation of perovskite La0.8Sr0.2Ga0.83Mg0.17O2.815 electrolyte using a poly(vinyl alcohol) polymeric method. Journal of Advanced Ceramics. DOI: 10.1007/s40145-016-0186-0.
- Yaqin Zhao, Yangdong Liu, Haoning Zhao, Zhenbin Chen (2024). The synthesis of a novel polymer‐type antistatic agent and its effect on the properties of polypropylene. Journal of Applied Polymer Science. DOI: 10.1002/app.55589.
- Mehdi Mehrabi Kooshki, Azam Jalali‐Arani (2009). Preparation, characterization and properties of polymeric nanocomposites based on natural rubber and polybutadiene rubber blend. e-Polymers. DOI: 10.1515/epoly.2009.9.1.1570.
- Shijie Wu, Yao Fu, Soham Das, Miles Pamueles Duan, et al. (2024). Synthesis of acrylonitrile–butadiene–styrene copolymers through interface-initiated room-temperature polymerization. Reaction Chemistry & Engineering. DOI: 10.1039/d4re00152d.
- Eun Ko, Dong‐Eun Lee, Keun‐Byoung Yoon (2020). Electrically Conductive Nanocomposites Composed of Styrene–Acrylonitrile Copolymer and rGO via Free-Radical Polymerization. Polymers. DOI: 10.3390/polym12061221.
- Neda Naderkhani, Sasan Rostami, Zahra Mokhtari, Majid Mollavali, et al. (2024). Solid polymer nanocomposite electrolytes based on poly(ε‐caprolactone)‐based waterborne polyurethane–polyethylene oxide and fluorine‐doped carbon quantum dot‐<scp>MXene</scp>. Polymers for Advanced Technologies. DOI: 10.1002/pat.6319.
- Nobuo Eguchi, Kohsuke Kawabata, Hiromasa Goto (2017). Synthesis of electro-optically active polymer composite of poly[2,2'-bis(3,4-ethylenedioxythiophene)-alt-fluorene]/hydroxypropyl cellulose showing liquid crystal structure. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2017.80.
- Yifu Huang, Muhan Zhang, Min Zhi Rong, Wenhong Ruan (2016). To immobilize polyethylene glycol-borate ester/lithium fluoride in graphene oxide/poly(vinyl alcohol) for synthesizing new polymer electrolyte membrane of lithium-ion batteries. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2017.5.
- Gonzalo Galaburri, Antonia Infantes‐Molina, Cynthia M. Melian Queirolo, Andrea Mathilde Mebert, et al. (2025). Composite Films Based on Linear Polyethyleneimine Polymer and Starch or Polysaccharides from DDGS: Synthesis, Characterization, and Antimicrobial Studies. Polymers. DOI: 10.3390/polym17040458.
- Jadsadaporn Chouytan, Ekwipoo Kalkornsurapranee, Christopher M. Fellows, Wisut Kaewsakul (2019). In Situ Modification of Polyisoprene by Organo-Nanoclay during Emulsion Polymerization for Reinforcing Natural Rubber Thin Films. Polymers. DOI: 10.3390/polym11081338.
- Alberto López‐Gil, Michele Benanti, Eduardo López-González, J.L. Ruiz‐Herrero, et al. (2018). Anisotropic polypropylene cellular polymers filled with nanoclays: Microstructure and properties. Polymer Composites. DOI: 10.1002/pc.24858.
- Han Jia, Keiya Jimbo, Hirogi Yokochi, Hideyuki Otsuka, et al. (2024). Self-healing and shape-memory polymers based on cellulose acetate matrix. Science and Technology of Advanced Materials. DOI: 10.1080/14686996.2024.2320082.
- Mohamed Gouda, Hayfa Habes Almutairi, Hany M. Abd El‐Lateef (2023). Hyaluronic acid/cellulose acetate polymeric mixture containing binary metal oxide nano-hybrid as low biodegradable wound dressing. Journal of Materials Research and Technology. DOI: 10.1016/j.jmrt.2023.09.086.
- Nurhadini Nurhadini, I Made Arcana (2018). SYNTHESIS OF CELLULOSE ACETATE FROM OIL PALM EMPTY FRUIT BUNCH AND ITS PROPERTIES AS POLYMER ELECTROLYTE MEMBRANES ON LITHIUM ION BATTERY. JURNAL KIMIA MULAWARMAN. DOI: 10.30872/jkm.v15i2.612.
- Michael‐Phillip Smith, Lauren E. Ball, Ilanie Wessels, Bert Klumperman (2025). Exploring the Removal of Thiocarbonylthio Chain Ends from Poly(styrene-<i>alt</i>-maleic anhydride) Copolymers. Macromolecules. DOI: 10.1021/acs.macromol.5c01887.
- Nicola Migliore, Theo G. van Kooten, Giacomo Ruggeri, Francesco Picchioni, et al. (2022). Synthesis and solution properties of poly(p,α dimethylstyrene-co-maleic anhydride): The use of a monomer potentially obtained from renewable sources as a substitute of styrene in amphiphilic copolymers. Reactive and Functional Polymers. DOI: 10.1016/j.reactfunctpolym.2022.105204.
- Abdulaziz Ibrahim Al‐Ghonamy, Mirham A. Y. Barakat (2010). Study of the Effect of Grafted Antioxidant on the Acrylonitrile-Butadiene Copolymer Properties. International Journal of Polymer Science. DOI: 10.1155/2010/359015.
- Jing Mei, Xinqiang Yuan, Dan Wang, Kun Zhang (2021). Effect of styrene acrylonitrile copolymer on the performance of TEP/PMMA composites. Materials Research Express. DOI: 10.1088/2053-1591/ac1288.
- Raúl O. Garay, Ana B. Schvval, Marcela F. Almassio, Pablo G. Del Rosso, et al. (2018). Fluorescent Amorphous Distyrylnaphthalene-Based Polymers: Synthesis, Characterization and Thin-Film Nanomolar Sensing of Nitroaromatics in Water. Polymers. DOI: 10.3390/polym10121366.
- Hossein Abdolmohammad‐Zadeh, Marzieh Ahari Salmasi (2018). A Nano-Composite Based on Fe3O4@Styrene-Maleic Anhydride Copolymer as a Magnetic Sorbent for Preconcentration of Silver(I) Ion. Analytical and bioanalytical chemistry research. DOI: 10.22036/abcr.2017.88163.1147.
- Michael Dawoud, Iman Taha (2024). Effects of Contamination with Selected Polymers on the Mechanical Properties of Post-Industrial Recycled Polypropylene. Polymers. DOI: 10.3390/polym16162301.
- Sibel Donmez, Zeynep Tuzenli, Göknur Bayram, Sevil Savaşkan Yılmaz (2024). Flame retardancy and mechanical properties of polypropylene composites containing intumescent flame retardants, preceramic polymers, and other additives. SPE Polymers. DOI: 10.1002/pls2.10126.
- Catarina Bravo, Nicolas Merle, Mathieu Sauthier, Marc Bria, et al. (2023). Coordinative Chain Transfer Polymerization of Butadiene Using Nickel(II) Allyl Systems: A Straightforward Route to Branched Polybutadiene. Macromolecules. DOI: 10.1021/acs.macromol.3c01385.
- Yang Li, Weijun Zhen (2020). Synthesis of Graphene Oxide-Polystyrene Graft Polymer Based on Reversible Addition Fragmentation Chain Transfer and Its Effect on Properties, Crystallization, and Rheological Behavior of Poly (Lactic Acid). Advances in Polymer Technology. DOI: 10.1155/2020/9364657.
- Coro Echeverría, Miguel Rubio, Daniel López (2019). Thermo-Reversible Hybrid Gels Formed from the Combination of Isotactic Polystyrene and [Fe(II) (4-Octadecyl-1,2,4-Triazole)3(ClO4)2]n Metallo-Organic Polymer: Thermal and Viscoelastic Properties. Polymers. DOI: 10.3390/polym11060957.
- J. Horrion, R. Jérôme, Ph. Teyssié (1989). Halato‐telechelic polymers. XIV. Solution behavior of α, ω‐divalent transition metal dicarboxylato polybutadiene. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/polb.1989.090271309.
- Shubham Singh Negi, Suneyana Rawat, Pramod K. Singh, Shri Prakash Pandey, et al. (2024). Influence of Carbon Black on Conductivity and Structure of Polyethylene Oxide Based Polymer Electrolyte Film. Macromolecular Symposia. DOI: 10.1002/masy.202300104.
- Suubitaa Spencer Sam, Choon-Aun Ng, Swee Yong Chee, Noor Zainab Habib, et al. (2017). Utilization of ethyl cellulose polymer and waste materials for roofing tile production. IOP Conference Series Earth and Environmental Science. DOI: 10.1088/1755-1315/67/1/012005.
- Florian Baffie, Olivier Boyron, Muriel Lansalot, Vincent Monteil, et al. (2023). Polyethylene and poly(ethylene-<i>co</i>-vinyl acetate) star polymers by iodine transfer polymerization. Polymer Chemistry. DOI: 10.1039/d3py00849e.
- Carlos Fernando Castro–Guerrero, Ana Beatriz Morales–Cepeda, José Luis Rivera‐Armenta, Ana Maria Mendoza-Martínez, et al. (2008). Gels from acrylic acid and hydroxypropyl cellulose via free radical polymerization. e-Polymers. DOI: 10.1515/epoly.2008.8.1.1697.
- Mohammed K. Jawad, S.R. Majid, Ekram Atta Al-Ajaj, Mahdi Hasan Suhail (2014). Preparation and Characterization of Poly(1-vinylpyrroli done-co-vinyl acetate)/Poly(methyl methacrylate) Polymer Electrolyte based on TPAI and KI. Journals & Books Hosting (International Knowledge Sharing Platform).
- Youqun Wang, Mingsheng He, JiaJia Cheng, Songlei Zhang (2018). Synthesis of styrene maleic anhydride copolymer grafted graphene and its dispersion in aqueous solution. RSC Advances. DOI: 10.1039/c8ra04888f.
- X. Helan Flora, Mani Ulaganathan, K. Kesavan, Somasundaram Rajendran (2014). Synthesis of Bendable Plasticized Nanocomposite Polymer ElectrolyteUsing Poly(Acrylonitrile)/Poly (Methyl Methacrylate) Polymer Blends. Zeitschrift für Physikalische Chemie. DOI: 10.1515/zpch-2013-0492.
- Naobumi Ôi, Koichi Moriguchi (1974). Infrared determination of the sequence distribution of sytrene units in acrylonitrile-styrene copolymers. BUNSEKI KAGAKU. DOI: 10.2116/bunsekikagaku.23.798.
- Xiuhui Zhang, Jing Dong, Feng Wang, Xuequan Zhang, et al. (2024). In Situ Efficient End Functionalization of Polyisoprene by Epoxide Compounds via Neodymium-Mediated Coordinative Chain Transfer Polymerization. Polymers. DOI: 10.3390/polym16182672.
- Sveta Zhiraslanovna Ozkan, V.A. Petrov, М. Н. Ефимов, A. A. Vasilev, et al. (2023). Novel Hybrid Composites Based on Polymers of Diphenyl-Amine-2-Carboxylic Acid and Highly Porous Activated IR-Pyrolyzed Polyacrylonitrile. Polymers. DOI: 10.3390/polym15020441.
- Ramón Díaz de León, Florentino Soriano‐Corral, Francisco Javier Enríquez‐Medrano, Gabriela Bosques Ibarra, et al. (2016). Synthesis of High<i> cis</i>-Polybutadiene in Styrene Solution with Neodymium-Based Catalysts: Towards the Preparation of HIPS and ABS via<i> In Situ</i> Bulk Polymerization. International Journal of Polymer Science. DOI: 10.1155/2016/9841896.
- Marzena Cejner, Ryszard Dobrowolski (2016). Ion-imprinted polymers: synthesis, characterization and applications. Studia Iuridica Lublinensia (Uniwersytet Marii Curie-Skłodowskiej w Lublinie). DOI: 10.17951/aa.2015.70.2.67.
- Isao Ikeda, Takayuki Hirose, Kimihiro Suzuki (1997). Immobilization of Azo-initiator and Subsequent Graft Polymerization of Vinyl Monomers on Cellulose and Cellulose Acetate.. Sen i Gakkaishi. DOI: 10.2115/fiber.53.111.
- Farnaz Ghonjizade-Samani, Laia Haurie, Ramón Malet, Marc Pérez, et al. (2024). Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer. Polymers. DOI: 10.3390/polym16070923.
- Kuppu Sakthi Velu, M. Aslam, Ramachandran Srinivasan, Prathap Somu, et al. (2025). Flufenamic Acid-Loaded Electrospun Nanofibers Based on Chitosan/Poly(vinyl alcohol) Polymeric Composites for Drug Delivery in Biomedical Applications. Polymers. DOI: 10.3390/polym17101411.
- Marie Raffin, Pierre‐Yves Dugas, Timo Melchin, Franck D’Agosto, et al. (2024). Synthesis of Well-Defined Poly(vinyl alcohol-<i>co</i>-vinyl acetate) Copolymers by Alcoholysis of Poly(vinyl acetate) Synthesized by Macromolecular Design via Interchange of Xanthate Polymerization, and Their Use as a Stabilizer in Emulsion (Co)polymerization of Vinyl Acetate. Biomacromolecules. DOI: 10.1021/acs.biomac.4c00728.
- Tadanobu Saiga, Atsushi Suzuki, Kenji Kikuchi, Takuji Okaya (2005). Surface sulfate groups on poly(methyl methacrylate) and poly(vinyl acetate) particles from soap-free emulsion polymerization. e-Polymers. DOI: 10.1515/epoly.2005.5.1.811.
- Britania Janet Gutiérrez Rafael, Orlando Zaca-Morán, R. Delgado‐Macuil, Hugo Martínez‐Gutiérrez, et al. (2024). Study of the Incorporation of Gel and Aloe vera Peel Extract in a Polymer Matrix Based on Polyvinylpyrrolidone. Polymers. DOI: 10.3390/polym16141998.
- Shahriar Arjmand (2014). Investigation of spatial configuration of Polypropylene and the influence of Molecular Weight Distribution, Catalyst type and Tacticity on mechanical, Thermal and optical properties of polymers. IOSR Journal of Polymer and Textile Engineering. DOI: 10.9790/019x-0133745.
- Deepti S. Desphande, R. Bajpai, A. K. Bajpai (2013). Polyacrylonitrile reinforced PVA based‐polymeric networks: Structural, morphological, and mechanical aspects. Polymer Engineering and Science. DOI: 10.1002/pen.23803.
- Luís Henrique Alves Cândido, Diego Borja Ferreira, Wilson Kindlein Júnior, Renan Demori, et al. (2014). Recycling cycle of materials applied to acrylonitrile-butadiene-styrene/policarbonate blends with styrene-butadiene-styrene copolymer addition. AIP conference proceedings. DOI: 10.1063/1.4873865.
- Zsófia Osváth (2020). Recent Advances in the Synthesis and Analysis of Polyamide 6 and Products Therefrom: From Polymerization Chemistry of ε-Caprolactam to Thermoplastic Resin Transfer Molding (T-RTM). Academic Journal of Polymer Science. DOI: 10.19080/ajop.2020.04.555629.
- Kazuhiko Kandori, Gohki Yonekawa (2014). Preparation and characterization of uniform pseudocubic hematite particles by utilizing polyethylene oxide polymers in forced hydrolysis reaction. Journal of the Ceramic Society of Japan. DOI: 10.2109/jcersj2.122.795.
- Isao Ikeda, Eriko Yamaoka, Yasushi Maeda (1999). Immobilization of Azo-initiator and Subsequent Graft Polymerization of Vinyl Monomers on Cellulose Acetate.. Sen i Gakkaishi. DOI: 10.2115/fiber.55.6_279.
- Yangyang Nie, Guan-Tao Yang, Haiyan Wang, Xiaoqiang Qiao (2023). Modified styrene-maleic anhydride copolymer-based chromatographic stationary phase for phospholipid separation and analysis. Chinese Journal of Chromatography. DOI: 10.3724/sp.j.1123.2023.02011.
- T. Ramesh Reddy, Bhooshan Muddam, A. R. Subrahmanyam, J. Siva Kumar, et al. (2022). Effect of TiO2 Nanoparticles on Structural and Optical Properties of Poly pyrrole, Poly vinyl alcohol Polymer Blend Thin Films. Oriental Journal Of Chemistry. DOI: 10.13005/ojc/380335.
- Aygun F. Alieva, Fatali E. Huseynov, Esmira J. Eyyubova, N.T. Shamilov, et al. (2019). Study of Ce(III) sorption by a chelating synthetic sorbent based on a copolymer of styrene with maleic anhydride and m-aminophenol. Proceedings of universities Applied chemistry and biotechnology. DOI: 10.21285/2227-2925-2019-9-3-376-384.
- J. Wang, Z.Y. Liu (2013). Preparation and Characterization of Acrylic Acid-Ca-Montmorillonite and Its Application for Preparation of Poly(vinyl acetate)/Montmorillonite Nanocomposite Emulsion by in situ Emulsion Polymerization. Asian Journal of Chemistry. DOI: 10.14233/ajchem.2013.14183.
- И. В. Запороцкова, Olesya Kakorina, Л. В. Кожитов, D. G. Muratov, et al. (2024). Polymer Nanocomposite Based on Pyrolyzed Polyacrylonitrile Doped with Carbon Nanotubes: Synthesis, Properties, and Mechanism of Formation. Polymers. DOI: 10.3390/polym16101308.
- Sayan Basak, Kevin A. Cavicchi (2024). Comparison of Swollen vs. Compounded Cross‐linked High‐<i>Cis</i>‐1,4‐Polybutadiene/<i>n</i>‐Tetracosane Shape Memory Polymers. Journal of Polymer Science. DOI: 10.1002/pol.20240820.
- Ziyang Yu, Y. Li, Y. R. Wang (2011). Polystyrene grafted onto high-cis-1,4 polybutadiene backbone via 'living' radical polymerization with 2,2,6,6-tetramethylpiperidinyl-1-oxy (TEMPO) radical. eXPRESS Polymer Letters. DOI: 10.3144/expresspolymlett.2011.89.
- Omar Melad Al-Azhar (2003). Viscometric investigations on the intrinsic viscosity of polyvinylpyrrolidone affected by polymer-polymer interactions in solution. e-Polymers. DOI: 10.1515/epoly.2003.3.1.366.
- Н. Ш. Ашуров, Sirozh Shahobutdinov, N. D. Kareva, S. M. Yugay, et al. (2020). Investigation of structure and properties of nanostructured polymer mixtures based on polyethylene and polyvinyl chloride. Plasticheskie massy. DOI: 10.35164/0554-2901-2020-3-4-8-11.
- Min Deng, Chuxiang Zhou, Gang Wu, Yinan Xu, et al. (2025). Preparation of Peanut‐Shaped PS Nanoparticles Through Emulsion Polymerization by Using Styrene‐Maleic Anhydride Copolymer as the Cosurfactant. Journal of Applied Polymer Science. DOI: 10.1002/app.57730.
- Hiroshi Ohishi, Souichiro Kishimoto, Takayuki Ikehara, Toshio Nishi (2000). Synthesis of styrene–acrylonitrile random copolymers (SAN) and polyarylate block copolymers and the control of their mechanical properties by morphology generation. Journal of Polymer Science Part B Polymer Physics. DOI: 10.1002/(sici)1099-0488(20000101)38:1<127::aid-polb16>3.3.co;2-w.
- Suneyana Rawat, Monika Michalska, Pramod K. Singh, K. Strzałkowski, et al. (2025). Ion Conduction Dynamics, Characterization, and Application of Ionic Liquid Tributyl Methyl Phosphonium Iodide (TMPI)-Doped Polyethylene Oxide Polymer Electrolyte. Polymers. DOI: 10.3390/polym17141986.
- A F Kishway, Ramadan Abouomar, Mohamed Bakry, Mohamed A. Ebiad, et al. (2025). Investigation of thermodynamic and solubility properties of poly (4-methyl styrene - alt - maleic anhydride) and poly (4-methyl styrene - alt - n-propyl maleimide) copolymers by inverse gas chromatography. Journal of Chromatography A. DOI: 10.1016/j.chroma.2025.465744.
- Mehrdad Azamian Jazi, Seyyed Arash Haddadi, Ahmad Ramazani, Fariba Azamian (2017). A Poly(vinyl acetate)/Colloidal SiO2 Nanocomposite Synthesized by Emulsion Polymerization and Study of Its Mechanical, Thermal and Rheological Properties. DOAJ (DOAJ: Directory of Open Access Journals). DOI: 10.22063/jipst.2017.1484.
- Douglas J. Gardner, Deniz Aydemir, Alper Kızıltaş, Yousoo Han, et al. (2015). NATURAL FILLERS-FILLED STYRENE MALEIC ANHYDRIDE COPOLYMER COMPOSITES. Duraspace of Bartin University (Bartin University).
- Guo-Quan Zhu, Fagang Wang, Kejing Xu, Yuying Liu (2013). Emulsion Properties of Poly(n-butyl acrylate)/Poly(methyl methacrylate) Polymer with Core-Shell Structure. Asian Journal of Chemistry. DOI: 10.14233/ajchem.2013.13646.
- Wantai Yang (2012). SURFACTANT-FREE EMULSION POLYMERIZATION OF METHYL METHACRYLATE INITIATED BY α-METHYL STYRENE-MALEIC ANHYDRIDE COPOLYMER MACROINITIATOR. Acta Polymerica Sinica.
- Fatemeh Shiri Jafarzadeh, Mostafa Vatani, Ahmadreza Raisi (2025). A novel blend membrane modified Pebax-1657 with high-loading styrene-acrylonitrile copolymer for CO₂ separation. Journal of CO2 Utilization. DOI: 10.1016/j.jcou.2025.103271.
- Lapporn Vayachuta, Pranee Phinyocheep, Daniel Derouet, Sagrario Pascual (2010). Synthesis of ATRP macroinitiator based on synthetic cis- 1,4-polyisoprene and its application for graft polymerization of MMA. e-Polymers. DOI: 10.1515/epoly.2010.10.1.292.
- Nobuhiro Ide, Asahiro OGUCHI, Yoshinobu Tsujii, Takeshi Fukuda, et al. (1997). Gelation of Styrene-Acrylonitrile Copolymer via Cyclodiborazane Formation. Nihon Reoroji Gakkaishi. DOI: 10.1678/rheology1973.25.4_197.
- Huixuan Zhang, Ye Han, Huiliang Zhang, Zhiliu Feng (1996). Structure and Mechanical Properties of Polybutylacrylate/Styrene/Acrylonitrile Copolymer. Chinese Journal of Applied Chemistry. DOI: 10.3724/j.issn.1000-0518.1996.1.74.
- Huixuan Zhang, Ye Han, Huiliang Zhang, Zhiliu Feng (1996). Structure and Mechanical Properties of Polybutylacrylate/Styrene/Acrylonitrile Copolymer. Chinese Journal of Applied Chemistry. DOI: 10.3724/j.issn.1000-0518.1996.1.7476.
- Yutaka Haga, Masahisa Nakajima, Ryutoku Yosomiya (1988). Photoconductive properties of cadmium sulfide encapsulated in styrene-acrylonitrile copolymers.. Journal of the Society of Materials Science Japan. DOI: 10.2472/jsms.37.1111.